on my dell inspiron desktop cannot complete backup. recently had to replace hard drive. set up a 30gb partition for backup but message is that it is insufficient space. backup appears to only require 12gb. what am i doing wrong? running windows 7 64 bit home premium with a 500 gb hard drive.
View 1 Replies
When attempting to backup a system image and/or selected libraries or files on an OEM installation of Windows 7 Home Premium 64-bit, I am receiving an error message. The initial pop-up states: The Last Backup Did Not Complete Successfully When I click on the pop-up to check the backup and select �More Details,� I see the following message. The System cannot find the file specified Error Code: 0x80070002 No additional information is provided. (And no clue is provided regarding what �file� is not found.) While I am attempting to backup to an external hard drive connected via eSATA, this error also occurs when I attempt a backup to either an external USB drive or a DVD.
I have attempted to run various backup scenarios wherein [a] Windows selects what to backup, [b] I choose a system image only, [c] I choose libraries only, or [d] I choose a very small data directory in a directory outside of the libraries. The error is always the same. When the system image is included, the backup does run for a time before the error message occurs � and a significant amount of data is written to the drive. When I run a file-only backup, the error is almost instantaneous. So far, in attempting to resolve the problem I have taken the following steps (although not necessarily in this order): Confirmed the registry profiles image paths are accordance with the information found at: The Storage Team at Microsoft - File Cabinet Blog : Common causes and solutions to Backup, System Restore, and Complete PC Backup problems - updated!. Everything was correct, no problems found. Ran the system file checker (sfc /scannow) with no errors reported. Scanned all hard drives (chkdsk x: /r) Confirmed that VSS and Windows Backup Services are running via services.msc Although I didn�t think it applied, I tested the Hotfix suggested at: You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM. No success. Reviewed the information at Error code 0x80070002 when you back up files in Windows 7 however the scenarios did not apply and therefore the solutions were not available to me. Checked the error logs at C:WindowsLogsWindowsBackup, but the error log is empty . Ran a Clean Boot via msconfig.exe Attempted to run Backup in Safe Mode, but of course Backup & Restore cannot be run in safe mode, even if I try to start the services manually (Error 1084). Reset Backup Files Configuration, using instructions at: Backup User and System Files - Reset to Default Configuration I am extraordinarily frustrated. This is a new computer, and an almost new installation of Windows. I have obviously missed something, but don�t know what it is. I am desperate for a solution.
How to Create a System Image Backup in Windows 7 ?
View 0 Replies View RelatedFrom what I hear, pretty much everyone in the developed world who uses 7 will have Windows Backup included - not just files and folders, but system image backup as well.
Your average punter is not going to look any further than that.
That's got to be bad news for Acronis, Macrium, etc.
Sure, the enthusiasts will check out 3rd party options - like they do with browsers.
You would think the big name must have considered an anti - trust case.
Maybe they didn't go ahead as some versions of 7 won't include it ( you're not very likely to see those).
Or because they didn't want to upset the MS lovers - witness the vitriol heaped on Opera by people who should know better.
It was available in Vista - but only the higher priced versions - people chose to pay extra for that.
Here's another chance for a controversial discussion - go for it.
I have a new Dell XPS 13 (Windows 7 64-bit) and am pleased with it thus far. I have successfully created a system image on DVDs (Using Windows utility).
Twice I have tried the Windows Backup utility to back up all user files (what Windows selects) to DVDs and it does not complete! The utility gets to 66% or 67% running for approx 4-6 hours and does not prompt to insert another DVD (the 2nd). The total size of data to backup is approx 11GB. The second time I disabled the antivirus software (MSE) hoping that was causing the problem.
Any suggestions or solutions?
I'd like to backup to DVDs as I have plenty and do not have an external HD available.
I have had many failed attempts at backingup my pc and keep getting the following error message"Backup encountered a problem while backing up file C:UsersSeanDesktop2013-01 (Jan). Error The system cannot find the file specified. (0x80070002))"
View 4 Replies View RelatedI don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.
I was wondering if anyone could help me out with a problem, namely that Windows Backup doesn't seem to be working atm. When I try to backup, no matter what the files or destination drive, I get the error "the backup did not complete successfully" during the "creating volume shadow copy" phase. When "troubleshooting options" pops up, it says "The requested system device cannot be found" and gives error code 0x80073BC3.
It worked until recently, I have no idea what caused the problem I haven't updated my hardware or anything.
I keep getting an error when running a windows 7 backup. it backs up to a linux server on the network. network sharing is correct. At the very end of the backup it says some files were skipped. when i check on the linux server the hard drive is full of files so it has access so I don't think it is a network problem.
I had a look at the log files in "C:WindowsLogsWindowsBackup" at the file "Backup Files 2010-02-07 190008_error.txt". It says "Backup encountered a problem while backing up file C:WindowsSystem32configsystemprofileWebsites. Error: The system cannot find the file specified. (0x80070002)".
I have made a Library in my Library folder called websites containing website files.
I have window seven Hp pavilion 64 bit, 4 ghz sp1, computer and I have never had so many problems. I have done at least 4 system restores. The screen flashes, I have adjusted monitor display size. Computer will not complete a backup. I hear my dvd drive making noises. The computer is slow. Could not install adobe reader until last night. My last index number was 3.3 to 2.6 and now it says 3.3. I don't know what my default browser is, firefox, and windows tell me they are not.
How do I find out if I have malware, virus and or browser is jacked? My prairie form cleaner shows me my computer is collecting large files or daily activity. Also, I want to know if my computer is recording, how can I tell? I want to make sure the back door is closed. I have scanned with Norton, Windows Defender, Avast and AVG over the time and I have had at least 4 items to return. 3 items were removed 1 quarantined and I have done restores since then.
i am gitting when i try to run backup windows backup fail while determing libraries locations of one of the users included in backup . Details : A volume shadow copy service component encountered an unexpected error the error codes here are 2 of em 0x81000031 and 0x8004230f
View 4 Replies View RelatedI have a new computer, Dell Inspiron 580 Windows 7 64-bit. I was trying the "Format" option in Windows Explorer and got the following message: : Windows was unable to complete the format." I had a DVD R/W disc in the drive.
View 4 Replies View RelatedI have created drives and installed fresh version of windows 7. I made 4 drives. I was not able to format one of these drive. When I gave format option a message displays "Windows was unable to complete format". Is it hard disk problem .
View 1 Replies View RelatedI have a Win7 ultimate 64bit I recieved from a friend. I assumed it was one of his Microsoft apps he gets in his MSDN subscription for free. Anyway, every now and then I would get these pop-ups from Microsoft saying its not genuine. He would give me a script to run that would fix it, until it would happen again.Bottom line I foud out later this was pirated software so I purchased a normal copy (win7 pro 64 bit) to do a reinstal of the software, BUTTTTT now I can't do it because I keep getting these errors saying "Windows was unable to create the required instalation folder 0x80070005". I know the last update for the pirated copy was something to remove "RemoveWAT.exe". I tried to do a restore in Win7 to a previous state but it errored "0x80070001"Any advice on what to do. I don't want to have to reformat the whole drive, because this was a dual boot on a new MAC so I could boot in iether MAC or Win7.
View 2 Replies View RelatedWhile I am formatting, this error is showing "windows is unable to complete the format". How can I format it?
View 1 Replies View RelatedI have two instances of windows 7 on my PC. I did a clean install on my C: drive, I have three hard drives c d & e. I am unable to format my e drive because I'm pretty sure that is where some win 7 system files are, I've formatted my d drive. I'd like to know how to get rid of the second win 7 boot. Its corrupted and won't complete a boot up
View 8 Replies View Relatedwhen i try to format my Cd's or DVDs it will say windows was unable to complete the format what can i do
View 1 Replies View RelatedAfter a brief wait, the sound comes back on, but soon cuts off again. It is impossible to watch a complete video under these circumstances.I haven't made any major changes to my computer, and I didn't have this problem until about a month ago.
View 2 Replies View Relatedi recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
I'm running windows 7 professional 32bit, Virgin broadband so i have their free virus and spyware program, virgin media security (old PCGuard) .
Recently when i perform a virus scan it has started to hang up when it reached the C: / Windows / temp / tmp00002b12c folder. So because it was hanging i decided to empty the temp folder.
All items went to the C:recycle.bin, then i performed the virus scan again, this time it now hangs on the same particular folder when scanning the C: / recycle.bin
So i emptied the recycle bin and even now it still hangs on the same folder and is unable to complete the virus scan, the virus scan stops dead as soon as it reaches this point, just hangs there until i force close the anti virus software.
I have read and digested a lot of information explaining that the files do not get deleted, only the index to the file when emptying the recycle bin, but i can not seem to find a way to solve my problem, how do i get access to this file that exists on my drive to clear it to allow me to complete a virus scan??
I installed windows 7 on my computer and have windows Vista also installed on one of my other hds. When i start my computer I get the option to Boot 7 or Vista "duel boot" I would like to remove the vista OS. When I try to format the HD that only has vista installed on it I recive "windows was unable to complete the format.
View 4 Replies View RelatedI recently had to reinstall windows 7 on my laptop as it randomly decided not to boot up. I had a backup of my files saved onto a partition on my laptop but it won't let me restore them for some reason.
I can access the partition from the computer tab and I see the backup there. When I click on it it asks me if I want to 'restore files from this backup', but when accept there are no backups listed.
I originally tried to repair my windows 7 when I had to reinstall it but it came up with a message saying that there were no backups to restore!
I had Acronis 2011 on my system but removed it. Since then it seems I am unable to use the windows backup utility in any way.. I click on it and nothing..I can do restore etc.My VSS is automatic and started?
View 5 Replies View RelatedIs there anything that I have done wrong here? I am trying to use DVD-R+ Double-sided discs as backup media for Windows 7 Backup/Restore program. It worked once, but now I'm getting message that the disc can't be used for my 2nd backup??? I have a DL disc drive which works fine for everything else but the backup.
View 1 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
I have a Win 7 64-bit and yesterday, I got the black screen of death on boot. Black screen, blinking cursor right after I boot. I can access the Samsung recovery menu. I figured I'd just backup my data and do system restore or clean reinstall. After hours of backup, I looked to see the details on a popup dialogue and apparently, nothing was backed up because it was unable to access the files on my C: drive and transfer onto an external hard drive. I also tried to backup an image, but that also fails.
View 9 Replies View RelatedI had just restored my laptop to a backup that I had created when I just bought it. But now after the Starting Windows screen it says " Setup is starting up services " and it just stops there. I waited for hours and nothing has happened. What should I do?
View 1 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedAny simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?
View 13 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View Related
