Audio Interruptions Unable To Watch Complete Video
Mar 10, 2012
After a brief wait, the sound comes back on, but soon cuts off again. It is impossible to watch a complete video under these circumstances.I haven't made any major changes to my computer, and I didn't have this problem until about a month ago.
View 2 Replies
ADVERTISEMENT
Feb 25, 2012
When I use firefox to try to watch video the video runs OK but when I stop it or it ends, my PC then freezes. This does not happen with IE8.I have uninstalled Adobe flash player (with the uninstall software from Adobe) then reinstalled it bit the same happens.
View 4 Replies
View Related
Aug 1, 2011
Well, I think it's my computer. Basically, I video'd something the other day on my panasonic camera, and when I went to turn it off, it said something like "Could not save file as speed of SD card is not available" or something like that.. But when I went to put the rest of my videos on my computer that file was on the SD Card, so I tried to add it to my computer... This was when the error code 0X80070570 and it said "The file or directory is corrupted and unreadable... But I tried to play it on Windows Media Player and it plays fine... THe only thing different is on the seek bar thingy it comes up with 00:00 so you can't go forward or backward, but it still plays fine... If possible I would really like to fix the error, because the corrupted video is something that I'd ideally like to have.
View 1 Replies
View Related
Sep 3, 2012
I want to simply connect my satellite receiver (has HDMI, composite video, it also has some sort USB) to my PC so that I can watch TV while working without needing a separate TV in my office. I have 2 monitors.
- I don't want to buy expensive vivo card
- I don't need to record, just watch live from Satellite Receiver (or a different source)
- sound should be transmitted
- should work regardless of PC graphics (currently have G45 onboard video, may buy i3 with onchip graphics only)
I found these StarTech Video-to-USB devices but read mixed reviews and it seems those are geared towards videoconversion and often have sound problems.
View 1 Replies
View Related
Jan 31, 2013
I cant watch any videos on any sever I tried to watch on several different sites and the video would not show but every thing else on page showed
View 4 Replies
View Related
Apr 30, 2011
When i watch videos online after a while the video slows down. This isnt cause by my internet connection.The frame rate of the video gets messed up.
View 1 Replies
View Related
Apr 8, 2012
I am facing problem to watch video broken picture at my HP Laptop pavilion g6.
View 1 Replies
View Related
May 19, 2012
This morning I was using the 'Default' option to change program associations from Windows Media Player to VLC. Apparently I changed one too many since now I am unable to watch live or recorded programs using Windows Media Center. Does any know which one I should switch back? .WTV is still associated with Windows Media Center.
View 2 Replies
View Related
Apr 17, 2011
I have a ZIIO and I can't use flash player why? I did update my firmware version. Why I can't watch videos and movies.
View 1 Replies
View Related
Jul 11, 2012
My desktop computer loses connection regularly and I cannot locate as to why. I have many other devices throughout the house at various locations which maintain a connection fine. When the connection drops it still displays I am connected, but there is clearly no connectivity.
I've tried toggling between two devices, one an eternal PCI adapter and the other a USB adapter. I get interruptions on both, so my conclusion is there must be a setting causing this. The desktop has been moved to other locations just in case of interference, and I've tried channel swapping as well.
View 1 Replies
View Related
Jan 26, 2013
on my dell inspiron desktop cannot complete backup. recently had to replace hard drive. set up a 30gb partition for backup but message is that it is insufficient space. backup appears to only require 12gb. what am i doing wrong? running windows 7 64 bit home premium with a 500 gb hard drive.
View 1 Replies
View Related
May 15, 2011
I have a new computer, Dell Inspiron 580 Windows 7 64-bit. I was trying the "Format" option in Windows Explorer and got the following message: : Windows was unable to complete the format." I had a DVD R/W disc in the drive.
View 4 Replies
View Related
Jul 22, 2012
I have created drives and installed fresh version of windows 7. I made 4 drives. I was not able to format one of these drive. When I gave format option a message displays "Windows was unable to complete format". Is it hard disk problem .
View 1 Replies
View Related
Nov 26, 2011
My family and I have accumulated a rather large library of DVD/BD movies that we like to watch repeatedly from time to time. In order to avoid searching for and handling the original disks each time, I have been ripping the content, preserving menus,chapters, and the audio and subtitle streams for our preferred language, along with the main video title.i chose to transcode the video using h.264 format, and AC3 audio, storing those and the subtitle stream in an MKV wrapper, because that format is reasonably well supported by the WDTV Live Plus player I have been using. However, I have found many shortcomings of that player to be frustrating to me. My frustration is caused mostly by these factors:
- Browsing screen by screen, with only textual titles when deciding what movie to watch next is not pleasing.
- If I want to jump into a particular movie chapter, again there is only text (minutes/seconds) to help me find the chapter I want, as opposed to artwork such as one would have when viewing the original disk using a DVD/BD player.
- Inability to pause, and advance frame by frame, as I would be able to if playing the original media.
- The WDTV Live Plus sometimes alters the appearance of the subtitles compared with the original media, and sometimes to the extent that they are unreadable.
Thinking that I might be able to improve on shortcomings like these, I embarked on a project to build my first HTPC, which I have now done. I am happy with the system from a hardware perspective. I installed Windows 7 Professional x64, and am poised to begin using Media Center for the first time. It is my hope that I can use the MKV files I have spent many hours creating, but if some other format proves more appropriate, I will start over, but using my new system, it will not take nearly so many hours the next time.I would eventually like to retire my two Tivo boxes, so I expect I will install a tuner card such as the Ceton InfiniTV4 that accommodates a multi-stream cable card, but one Tivo function we use occasionally (and would like to retain) is the ability to download Amazon video on demand for later viewing. Is this possible with Media Center, and could I stop viewing from the family room in the middle of a movie, and continue watching on the bedroom extender?
View 6 Replies
View Related
Nov 1, 2010
I have a Win7 ultimate 64bit I recieved from a friend. I assumed it was one of his Microsoft apps he gets in his MSDN subscription for free. Anyway, every now and then I would get these pop-ups from Microsoft saying its not genuine. He would give me a script to run that would fix it, until it would happen again.Bottom line I foud out later this was pirated software so I purchased a normal copy (win7 pro 64 bit) to do a reinstal of the software, BUTTTTT now I can't do it because I keep getting these errors saying "Windows was unable to create the required instalation folder 0x80070005". I know the last update for the pirated copy was something to remove "RemoveWAT.exe". I tried to do a restore in Win7 to a previous state but it errored "0x80070001"Any advice on what to do. I don't want to have to reformat the whole drive, because this was a dual boot on a new MAC so I could boot in iether MAC or Win7.
View 2 Replies
View Related
Mar 7, 2010
When attempting to backup a system image and/or selected libraries or files on an OEM installation of Windows 7 Home Premium 64-bit, I am receiving an error message. The initial pop-up states: The Last Backup Did Not Complete Successfully When I click on the pop-up to check the backup and select �More Details,� I see the following message. The System cannot find the file specified Error Code: 0x80070002 No additional information is provided. (And no clue is provided regarding what �file� is not found.) While I am attempting to backup to an external hard drive connected via eSATA, this error also occurs when I attempt a backup to either an external USB drive or a DVD.
I have attempted to run various backup scenarios wherein [a] Windows selects what to backup, [b] I choose a system image only, [c] I choose libraries only, or [d] I choose a very small data directory in a directory outside of the libraries. The error is always the same. When the system image is included, the backup does run for a time before the error message occurs � and a significant amount of data is written to the drive. When I run a file-only backup, the error is almost instantaneous. So far, in attempting to resolve the problem I have taken the following steps (although not necessarily in this order): Confirmed the registry profiles image paths are accordance with the information found at: The Storage Team at Microsoft - File Cabinet Blog : Common causes and solutions to Backup, System Restore, and Complete PC Backup problems - updated!. Everything was correct, no problems found. Ran the system file checker (sfc /scannow) with no errors reported. Scanned all hard drives (chkdsk x: /r) Confirmed that VSS and Windows Backup Services are running via services.msc Although I didn�t think it applied, I tested the Hotfix suggested at: You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM. No success. Reviewed the information at Error code 0x80070002 when you back up files in Windows 7 however the scenarios did not apply and therefore the solutions were not available to me. Checked the error logs at C:WindowsLogsWindowsBackup, but the error log is empty . Ran a Clean Boot via msconfig.exe Attempted to run Backup in Safe Mode, but of course Backup & Restore cannot be run in safe mode, even if I try to start the services manually (Error 1084). Reset Backup Files Configuration, using instructions at: Backup User and System Files - Reset to Default Configuration I am extraordinarily frustrated. This is a new computer, and an almost new installation of Windows. I have obviously missed something, but don�t know what it is. I am desperate for a solution.
View 9 Replies
View Related
Oct 13, 2011
While I am formatting, this error is showing "windows is unable to complete the format". How can I format it?
View 1 Replies
View Related
Oct 15, 2011
I have two instances of windows 7 on my PC. I did a clean install on my C: drive, I have three hard drives c d & e. I am unable to format my e drive because I'm pretty sure that is where some win 7 system files are, I've formatted my d drive. I'd like to know how to get rid of the second win 7 boot. Its corrupted and won't complete a boot up
View 8 Replies
View Related
Jan 31, 2012
when i try to format my Cd's or DVDs it will say windows was unable to complete the format what can i do
View 1 Replies
View Related
Sep 21, 2011
I can't camera audio to work with Windows 7 64bit video works great but no audio
View 1 Replies
View Related
May 11, 2011
Starting about a month ago, after six to seven months of my laptop working fine, I've been getting video and audio stuttering whenever gaming or watching most HD videos and after messing around with my drivers I realized that whenever my Realtek HD Audio drivers are disabled my video runs flawlessly, but when enabled both video and audio stutter. I'm using a Sony VAIO laptop so I'm assuming that the sound card isn't easily replaceable. I've tried using the newest drivers straight from Realtek's website and also the outdated driver provided by Sony's website, both of which result in the same stuttering. Sony has also replaced the motherboard once and it did not resolve the issue.I'm currently running Windows 7 with 6gb of RAM and an NVIDIA GeForce 330M graphics card.
View 16 Replies
View Related
Nov 1, 2009
i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
View 11 Replies
View Related
Jul 8, 2012
I'm running windows 7 professional 32bit, Virgin broadband so i have their free virus and spyware program, virgin media security (old PCGuard) .
Recently when i perform a virus scan it has started to hang up when it reached the C: / Windows / temp / tmp00002b12c folder. So because it was hanging i decided to empty the temp folder.
All items went to the C:recycle.bin, then i performed the virus scan again, this time it now hangs on the same particular folder when scanning the C: / recycle.bin
So i emptied the recycle bin and even now it still hangs on the same folder and is unable to complete the virus scan, the virus scan stops dead as soon as it reaches this point, just hangs there until i force close the anti virus software.
I have read and digested a lot of information explaining that the files do not get deleted, only the index to the file when emptying the recycle bin, but i can not seem to find a way to solve my problem, how do i get access to this file that exists on my drive to clear it to allow me to complete a virus scan??
View 3 Replies
View Related
Mar 26, 2011
My DVD drive suddenly stopped reading Movie DVDs. If I load data CD and data DVD it reads successfully. But when I load redbox or netflix dvd it does not read atall.
I tried changing the registry entries as described in this forum but no effect. I am stuck. Tried re-installing the device driver too but no effect. Still the same.
View 1 Replies
View Related
Dec 18, 2011
I installed windows 7 on my computer and have windows Vista also installed on one of my other hds. When i start my computer I get the option to Boot 7 or Vista "duel boot" I would like to remove the vista OS. When I try to format the HD that only has vista installed on it I recive "windows was unable to complete the format.
View 4 Replies
View Related
Oct 21, 2012
i'm using windows 7 32-bit, i7 processor, 4gb ram, onboard audio (with realtek) and a geforce gt220 video card.when i play a video the audio is always faster than the video. i use umplayer, so fortunately i can use the plus or minus keys to sync everything up. however on Internet or other online videos it's almost always out of sync, as well as when i watch something streamed from my pc to my xbox using windows media center. i'm thinking it's either a windows 7 problem or a hardware problem. i've googled it and found nothing similar with a solution.oh, and i use avira anti-virus, not norton or mcafee.
View 3 Replies
View Related
Sep 10, 2012
I recently desc covered that besides VLC on my laptop all the other video player are not able to work properly (meaning,, Windows Media Player 12, Cyberlink PowerDVD12 and WMPC are able to play only the audio, but not the video, just black screen),, BUT with VLC is no problem playing any video format!! The thing is that I didn't have this problem previously,, all my video players were able to play all the same video files, which they can't now! I have the latest AMD Radeon HD video drivers installed
View 9 Replies
View Related
Sep 9, 2012
Recently, within the past couple of weeks or so, whenever I play a video (avi, wmv, mp4) in Media Player (or VLC) the the video and audio is out of sync. It's not out by much, but it is clearly noticeable. Oddly, if I play them in Media Player Classic they appear to be in sync (or as near as).I know for a fact that these videos used to play fine, so it's not a problem with the files themselves. I haven't knowingly downloaded any codecs or anything else that may have caused this, and I've scanned extensively for viruses and spyware.I want to reiterate that up until a while ago the videos played fine, so it's not a spec problem. For information, I'm running Microsoft Windows 7 Ultimate 64-bit on a G840 2.80GHz dual core with 8Gb of RAM.Internet searches have so far turned up nothing. I'm tempted to fish out my old XP machine and test the videos on there,
View 2 Replies
View Related
Nov 18, 2011
I bought an Nvidia 570gtx and I am able to have both audio and sound to play on my TV as a second monitor. However to do this I have to go into windows 7 screen resolution screen and duplicate the displays though ones 1900x1200 and the Tv is 1920x1080 causing the PC screen to look funky but I can live with it to launch the games.I than have to go into the sound properties and set the default for the system to the HDMI cable and I can play my games on the TV like I want. (about 30 feet away)When done I have to come back and undue each setting to get control back to my PC.
View 9 Replies
View Related
Apr 3, 2011
With Windows XP SP3 I was able to transmit audio which was digital and sometimes multi-channel to my Denon reciever through the HDMI output on my motherboard; I was also able to simultaneoulsy display my computer through that same HDMI connection through my Denon reciever and on to my my Toshibe LCD TV.But when I installed Windows 7 Ultimate 32bit the HDMI audio was very limited (only 16 bit 2-channel @ 48,000 Hz) and can only select it when the reciever is on (which makes sense, but it's anoying to have to go into sound properties and switch to HDMI if I started the computer before the reciever, I hate technology trying to pretend it knows what I want it to do, it should just be able to do what it's told.) Then, when I turn on the TV this message comes up (which I would see when I was using XP but it didn't change anything)An HDMI-to-DVI display connection has been detected. In order to hear audio on your HDMI based TV or display, you will need to have a seperate audio conecction from you computer sound outputs to your TV or audio equipment.However I'm not using the DVI at all I just want to use the HDMI into HDMI because that's the way it's supposed to work because HDMI is supposed to handle both and I shouldn't need to use another cord when I'm already using one that does both.And so then my sound no longer works but my computer shows on my TV.Whoopdee doo! why can't I have both. HDMI is supposed to support both and when computer/motherboard/OS manufacturers put these technologies on computers you'd think they should commit to applying them flawlessly the way they were intended to be used.I understand this may be a driver issue and I've tried many combinations of the newest & the just HDMI Realtek Driver as well as the Gigabyte mother board drivers and the appropriate ATI/Catalyst driver/downloads.
View 1 Replies
View Related
Sep 1, 2009
I've been running Vista 64 sp1 about a year, and using my xbox 360 as an media center extender, hard wired. Its been mainly for pictures and music as we all know it's picky when it comes to video. It's been swell, no hickups at all. All this time, I've had a hauppage HVR4000 installed but not ever in use. Since all i have is analouge cable for TV-signal, I didn't have much use for it anyway, as WMC as of sp1 didn't support this type of signal.
A few weeks back I discovered TVPack2008, and suddenly realized I could put my HVR4000 to some good use. Since this update was OEM only, I had to find a rouge copy of the installer. Voila, analouge cable TV-playback on my 'puter.
Here my sorrows start:
Streaming to MCE (360) now only produced video or audio errors, saying I had to restart the extender. Pictures could still be viewed, but all video/audio nomatter what filetype, would no longer work.
So in my last desperate effort to get it to work again, I installed win 7 64, and was hoping for a change of luck. Same symptoms, different error message: "MCE cannot find the file you are trying to play". Pictures can still be viewed as before. The files are stored in default folders, and they are not corrupted. Streaming to dashboard works fine, both audio and video.
Also the "Play To"-functionality is not working, giving me error codes 0X80040369, UPnP-error 705, saying "cannot control the device".
What I've tried so far without luck:
-Updating firware on my D-link N router
-wiping the Xbox 360 harddrive and running intial setup
-opening up required ports on firewall (although I've read this doesn't do anything for devices on the same network)
-uninstalling hauppage drivers when using vista64 sp1.
My win 7 install is clean, no codec packs or funny stuff.
Anyone experiencing similar things? Or better, could give me some pointers to how to fix it?
View 5 Replies
View Related