I want to simply connect my satellite receiver (has HDMI, composite video, it also has some sort USB) to my PC so that I can watch TV while working without needing a separate TV in my office. I have 2 monitors.
- I don't want to buy expensive vivo card
- I don't need to record, just watch live from Satellite Receiver (or a different source)
- sound should be transmitted
- should work regardless of PC graphics (currently have G45 onboard video, may buy i3 with onchip graphics only)
I found these StarTech Video-to-USB devices but read mixed reviews and it seems those are geared towards videoconversion and often have sound problems.
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
sound to work after up dating to windows 7 ... i have a m3n72-d asus mother board ...how the hell do i get the onboard sound to work ..point me in the right direction of a driver ..that works i have tried loads ...the media and pci are showing yellow icons ..and windows cannot find the drivers?
When I use firefox to try to watch video the video runs OK but when I stop it or it ends, my PC then freezes. This does not happen with IE8.I have uninstalled Adobe flash player (with the uninstall software from Adobe) then reinstalled it bit the same happens.
Well, I think it's my computer. Basically, I video'd something the other day on my panasonic camera, and when I went to turn it off, it said something like "Could not save file as speed of SD card is not available" or something like that.. But when I went to put the rest of my videos on my computer that file was on the SD Card, so I tried to add it to my computer... This was when the error code 0X80070570 and it said "The file or directory is corrupted and unreadable... But I tried to play it on Windows Media Player and it plays fine... THe only thing different is on the seek bar thingy it comes up with 00:00 so you can't go forward or backward, but it still plays fine... If possible I would really like to fix the error, because the corrupted video is something that I'd ideally like to have.
After a brief wait, the sound comes back on, but soon cuts off again. It is impossible to watch a complete video under these circumstances.I haven't made any major changes to my computer, and I didn't have this problem until about a month ago.
i have an Alienware M17X R3 with an HDMI INPUT which i can plug my xbox 360 into and play it through my laptop monitor. Is there any software that will allow me to use the HDMI IN as the primary video input, in oppose to the actual desktop screen? i tried using a few free softwares in which it records the "HDMI IN ON" message that shows up, but when it goes away and when I see my dashboard, the recording software sees my desktop image. i do not have a capture card, nor do i want to use one. i simply want to use a software (if there is one) to capture the HDMI IN on my laptop.
I have an Asus P6T motherboard with Realtek ALC1200 on board audio and Windows 7 64 bit OS, DirectX 10, Audio Driver version 6.0.1.5859. The sound works normally for all audio functions. I installed Nero and went to use the Wave Editor application to record a song from the web and got the message "Unable to open recording device". Going to Options > Device Settings > for an Input Device there only shows "MMEwave mapper)". There is no other input device listed. In Device Manager the "Realtek High Definition Audio" device shows as the only device. Going to "Manage Audio Devices" and the "Recording Tab" there shows only "Microphone" and "Line In". There is no "Realtek Digital Input" device listed (as I've seen in web screenshots from others). how to get an input device listed to use with Nero recording?
I installed windows 7 on my Sony VGN NR498E and I want to know if I need to install another sound card to have my sound input devices option availiable again.
I have a Toshiba Satellite A665-S6086 laptop which had to be re-imaged back to out of the box status. Before the re-imaging, the Realtek audio controller had a mixer panel in its device manager, and on the system volume control, that allowed me to record from the mix of audio going to the speaker (labeled "stereo mix" ). Now, I find that the ONLY recording device that EXISTS is the physical built-in microphone; I just recorded a streamed radio program, and it was basically recording the room noises and, very faintly, the audio from the speaker. That was how I discovered the change in software environment. I have tried downloading the driver from the recovery partition; it installs but does not correct the problem. I have tried uninstalling both audio devices and letting them reinstall on restart. I can play audio to the speakers, but not record the audio internally.
I do use a online USB foot pedal that is used for transcription. I have two plugs powering the system, one for the monitor and the other to the CPU, connected to a extension cord with 5 sockets. To the rest of the sockets I had my DTH (digital tv receiver) and a small tv connected. With this setup, when I am working with my footpedal, it works for 1/2 an hour with proper play, rewind, and forward controls. After 1/2 an hour, it starts acting weird and begins to control itself in that it plays stops rewinds continuously by itself making it difficult for me. At first I thought it is driver issue and reinstalled and installed and tried all methods. I do get lot of errors at such times if I change the USB port for the pedal during the times of this issue. However, the moment I switch the DTH off from the power source. It all seemed to be working fine again without any issue.
Considering that, I thought it may be due to some voltage problem with distribution of power and I connected the DTH set seperately out to an entirely different AC wall socket but same room. Again, for the first half an hour the pedal controls works fine, and then the same thing happens and the moment I switch the DTH receiver off, its all back to normal.
I have an Issue when I go into the device manager of my Windows 7 64 bit desktop pc it says: "The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. This is for the pci input device."
I tried updating the drivers and it says windows could not find the drivers for this device if you know the manufacturer go to there website. I tried searching for the drivers manually through the list that windows gives you but said it couldn't find them either. I have a Creative audigy 2 sound card and when I go to update the driver from the audigy 2 it says that it can't find drivers even though they are installed and the sound card is working.
Nothing indicates that they are installed except for the fact that it does show a driver date and version. I have the latest drivers. From 3 something 2012 I tried updating the drivers from creatives website but it said no hardware device could be detected on my system. Should I maybe reinstall the card? Just put it back into the same slot on my motherboard?
[code] The main problem is the multimedia audio controller & pci input device in the device manager always have a sign of (!) and when I check the properties, it's said code 28(If i'm not mistaken). I have installed the driver from the manufacturer, but still the sound won't come out.
I'm running Windows 7 Home N SP1 x64. I'm using an M-Audio Fast-Track Pro device to record audio into a music sequencer (Cubase 5), through a Shure SM58 Microphone. The M-Audio box is connected to the computer via USB. I've been using this set-up for about a year now and it hadn't caused me any problems until the last few weeks. For some reason Windows is not registering any signal from the input of the M-Audio box. The box itself picks up the sound and I can hear tapping on the microphone when M-Audio is selected as the output device, but not from the built-in speakers.
I first noticed the problem in the software (and thought for the longest time that it was the software). I'm very competent with Cubase and tried everything I could think of to get it to register with no avail. It was only when I tried to use the device on another sequencer that I realised that it's not the software. Then, since the mic works fine, the box itself is picking up the signal and out-putting it through itself, it must be something wrong with the computer or the OS.
I've re-installed the M-Audio driver, didn't make any difference. I've set the M-Audio as default in both playback and recording tabs in the sound control panel. Playback works fine. One thing that's really strange is that when I open manage sound drivers in the control panel and tap on the mic, neither the levels in recording nor playback even flutter, even though I can hear it pretty clearly through the headphones.
I updated my Dell to Windows 7 last night and I realized that I don't have any sound drivers or cards. I have been Googling for about 3 hours now without any luck. Can any one help me?
I cannot find my device model number at all. It is a graphics chip and I have searched and searched but found nothing. It is an old Packard bell Imedia computer and cannot find the model number. (I searched the serial number, found nothing)AMD ATHLON XP 3000+ (2.16ghz)80GB ATA HDDDVD RW Drive *NEC*300w (or more?) psu512mb RAM (SDRAM?)
I am using acer aspire 7220 laptop with Win7 OS. I found a red cross near my volume icon and I see "No audion output installed" message. Also, When I checked in my device manager there is no sound, video and game controller. I see only three devices which are marked with yellow symbo. I have looke several forums regarding this issue but none solved the problem
This software works fine with my webcam until I hit the Record button then I get this error message - no device of this type is present. I searched everywhere for this message and no hits, not even on the NCH website, thing is that this message does come up if it can't find your webcam but it does find and display my camera. Only when I try to record do I get this msg. Works fine with XP I am running Win 7 ultimate. NCH website says its compatible with Win 7. No device driver problems .....
hey having peculiar problem watching vids thru ie9, when on comcast.net or aol, when i play video in their small screen, it flashes and then turns white or black cannot see video at all but can hear it, when i expand to full screen same video(s) plays fine.. i uninstalled adobe flash, and java reinstalled them both, as well as reset ie9, still same problems.. when i go to Internet videos play fine..