sound to work after up dating to windows 7 ... i have a m3n72-d asus mother board ...how the hell do i get the onboard sound to work ..point me in the right direction of a driver ..that works i have tried loads ...the media and pci are showing yellow icons ..and windows cannot find the drivers?
View 2 Replies[code] The main problem is the multimedia audio controller & pci input device in the device manager always have a sign of (!) and when I check the properties, it's said code 28(If i'm not mistaken). I have installed the driver from the manufacturer, but still the sound won't come out.
View 4 Replies View RelatedI have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
View 8 Replies View RelatedMarvel not showing up in device man - storage controllers?
View 9 Replies View RelatedI have an Issue when I go into the device manager of my Windows 7 64 bit desktop pc it says: "The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. This is for the pci input device."
I tried updating the drivers and it says windows could not find the drivers for this device if you know the manufacturer go to there website. I tried searching for the drivers manually through the list that windows gives you but said it couldn't find them either. I have a Creative audigy 2 sound card and when I go to update the driver from the audigy 2 it says that it can't find drivers even though they are installed and the sound card is working.
Nothing indicates that they are installed except for the fact that it does show a driver date and version. I have the latest drivers. From 3 something 2012 I tried updating the drivers from creatives website but it said no hardware device could be detected on my system. Should I maybe reinstall the card? Just put it back into the same slot on my motherboard?
I'm running Windows 7 Home N SP1 x64. I'm using an M-Audio Fast-Track Pro device to record audio into a music sequencer (Cubase 5), through a Shure SM58 Microphone. The M-Audio box is connected to the computer via USB. I've been using this set-up for about a year now and it hadn't caused me any problems until the last few weeks. For some reason Windows is not registering any signal from the input of the M-Audio box. The box itself picks up the sound and I can hear tapping on the microphone when M-Audio is selected as the output device, but not from the built-in speakers.
I first noticed the problem in the software (and thought for the longest time that it was the software). I'm very competent with Cubase and tried everything I could think of to get it to register with no avail. It was only when I tried to use the device on another sequencer that I realised that it's not the software. Then, since the mic works fine, the box itself is picking up the signal and out-putting it through itself, it must be something wrong with the computer or the OS.
I've re-installed the M-Audio driver, didn't make any difference. I've set the M-Audio as default in both playback and recording tabs in the sound control panel. Playback works fine. One thing that's really strange is that when I open manage sound drivers in the control panel and tap on the mic, neither the levels in recording nor playback even flutter, even though I can hear it pretty clearly through the headphones.
I have an Asus P6T motherboard with Realtek ALC1200 on board audio and Windows 7 64 bit OS, DirectX 10, Audio Driver version 6.0.1.5859. The sound works normally for all audio functions. I installed Nero and went to use the Wave Editor application to record a song from the web and got the message "Unable to open recording device". Going to Options > Device Settings > for an Input Device there only shows "MMEwave mapper)". There is no other input device listed. In Device Manager the "Realtek High Definition Audio" device shows as the only device. Going to "Manage Audio Devices" and the "Recording Tab" there shows only "Microphone" and "Line In". There is no "Realtek Digital Input" device listed (as I've seen in web screenshots from others). how to get an input device listed to use with Nero recording?
View 9 Replies View RelatedI want to simply connect my satellite receiver (has HDMI, composite video, it also has some sort USB) to my PC so that I can watch TV while working without needing a separate TV in my office. I have 2 monitors.
- I don't want to buy expensive vivo card
- I don't need to record, just watch live from Satellite Receiver (or a different source)
- sound should be transmitted
- should work regardless of PC graphics (currently have G45 onboard video, may buy i3 with onchip graphics only)
I found these StarTech Video-to-USB devices but read mixed reviews and it seems those are geared towards videoconversion and often have sound problems.
I installed windows 7 on my Sony VGN NR498E and I want to know if I need to install another sound card to have my sound input devices option availiable again.
View 2 Replies View RelatedI have a Toshiba Satellite A665-S6086 laptop which had to be re-imaged back to out of the box status. Before the re-imaging, the Realtek audio controller had a mixer panel in its device manager, and on the system volume control, that allowed me to record from the mix of audio going to the speaker (labeled "stereo mix" ). Now, I find that the ONLY recording device that EXISTS is the physical built-in microphone; I just recorded a streamed radio program, and it was basically recording the room noises and, very faintly, the audio from the speaker. That was how I discovered the change in software environment. I have tried downloading the driver from the recovery partition; it installs but does not correct the problem. I have tried uninstalling both audio devices and letting them reinstall on restart. I can play audio to the speakers, but not record the audio internally.
View 2 Replies View RelatedI recently upgraded my computer from XP to Windows 7 now I have no sound! In device manager there is a yellow ? mark by multimedia device and PCI input device, which I am sure is an audio card I installed trying to get sound. My system is a Gateway Desktop E - 4100, Sound Blaster Live audio card. Have all ready tried Intel, Gateway and Mircrosoft to locate the newest drivers to fix the multimedia drivers with no luck what so ever. I even payed and downloaded a program to scan and update my computer with the latest driver (DID NOT WORK) and spent hours and hours searching the web to locate the driver.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.66GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 1
RAM: 2558 Mb
[code].....
I do use a online USB foot pedal that is used for transcription. I have two plugs powering the system, one for the monitor and the other to the CPU, connected to a extension cord with 5 sockets. To the rest of the sockets I had my DTH (digital tv receiver) and a small tv connected. With this setup, when I am working with my footpedal, it works for 1/2 an hour with proper play, rewind, and forward controls. After 1/2 an hour, it starts acting weird and begins to control itself in that it plays stops rewinds continuously by itself making it difficult for me. At first I thought it is driver issue and reinstalled and installed and tried all methods. I do get lot of errors at such times if I change the USB port for the pedal during the times of this issue. However, the moment I switch the DTH off from the power source. It all seemed to be working fine again without any issue.
Considering that, I thought it may be due to some voltage problem with distribution of power and I connected the DTH set seperately out to an entirely different AC wall socket but same room. Again, for the first half an hour the pedal controls works fine, and then the same thing happens and the moment I switch the DTH receiver off, its all back to normal.
my PCI input cant update and i think it will fix through this website
View 5 Replies View RelatedI updated my Dell to Windows 7 last night and I realized that I don't have any sound drivers or cards. I have been Googling for about 3 hours now without any luck. Can any one help me?
View 1 Replies View RelatedI'm running Windows 7 32 bit and I just noticed that all my drivers for the USB controllers, Audio/Sound devices and the Networking internet (Broadcom Netxtreme Drivers) have all died. They indicate that a Code 39 is the problem. I tried to load some of the drivers but it wouldn't allow them to install. I did a last known configuration attempt, no results. Did a system restore and it gave me an error message saying it didn't restore properly. I am trying to get the drivers online, burn them to a disk and load them. I have no internet access on that PC and the USB ports obviously don't work. I can get drivers on this PC online. Some I can't find. I did the uninstall driver, disable, all the usual for this problem. I am stumped. Any recovery attempts produce nil results. Thanks to Microsoft, I have no installation disc to do a new install or a backup image.
View 3 Replies View RelatedHave recently purchased a small usb inspection snake camera with led light and when testing it plugged it into two desktops computers (one xp pro not sure of the other as it was a network work computer) It automatically loaded the drivers and brought up a screen automatically with the realtime image.(no driver disc came with it). However plugging into my windows 7 64bit sony laptop it signals a connection beep, loaded drivers automatically but wouldn't open or show up on my computer disc manager as an external usb source to click on. It does however show up on device manager as a usb camera and when I unplug and replug in it disappears and reappears so I know I have the right camera (not the lap top webcam inbuilt one that shows USB 2 Camera). Have tried updating drivers automatically and uninstalling it etc. Need it to work on the lap top so it can act as the movable screen for it?
View 29 Replies View RelatedIf i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
View 2 Replies View RelatedI have a hp pavilion dv9700 running windows 7 home premium,and the atheros wireless device keeps disapearing out of the device manager and stops working sometimes it works again if i reboot ,i have tried a replacement but the same happens.
View 4 Replies View RelatedHow do i figure out what driver or even component windows wants software for when in the device manager under other devices it lists an unknown device and windows update cannot find anything.
Oh and is it appropriate for me to use this topic to ask another question regarding explorer.exe as while i am inside a folder i delete (by choosing delete from the context menu in the tree view) while inside that folder on this particular laptop PC explorer. always crashes, collect information, sends it and restarts explorer. I have not experienced this problem on any other pc running any version of windows 7, oh and the same happened with build 7264 x32 and the current install of build 7600 x64.
My device shows in device manager with yellow exclamation. when try to update it says my drives are up to date when i restart it tells me cant find suitable drives for this device.
View 1 Replies View Relatedwhat will i do, there is no usb mass storage device driver detected in the device manager of my laptop.
View 3 Replies View RelatedI got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
i cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is: ASUS - K52JC
2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )
i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook
but couldn't find device ID, because it is not listed on device manager
When I went to add a new Bluetooth keyboard (Control Panel>Add Devices).When pressing Add Device, nothing happens.I have two Bluetooth devices already installed, are listed under "Devices" are "found" and work fine.Problem is that, I can not either add new devices or, remove any of my Bluetooth devices already installed.Click Add Printer - fine, the wizard starts.Add Device - nothing."Remove Device" - when a device is highlighted for removal, the system appears to be "working" for a moment, but then does not remove the device, it remains.Have checked that Services related to Bluetooth have not been disabled but am wondering if anyone knows if there are any specific services that would be required for Add Devices or Removal of Devices to function? (HID Devices and Plug and Play are Started / Automatic)
View 4 Replies View RelatedWhen I disable the network controller in Device Manager, the controller is disabled but nothing changes in Device Manager to identify the device as being disabled. When I used to do the same thing in Windows XP, the device icon turned yellow. Is there some setting to identify disabled devices in Win 7's Device Manager?
View 4 Replies View RelatedMy webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies View Relatedi have been trying to figure out how to fix this problem i have a blue tooth dongal and im trying to hook up my wii remote to my computer..the device is recognised and windows tells me its searching for drivers and the device will be ready when shown in device and printers. the device icon pops up so i no it installd but after a few seconds the icon is grayd out and the device just dosent respond ..
View 7 Replies View RelatedIt's recognized in device manager as "Unknown device". But I've not connected anything to pc. Also all of my usb ports are working at 1.1 speed. When I try to connect any device, I get the message "that it could work faster, if i connect it to hi-speed usb port".
View 6 Replies View RelatedI installed Windows Vista using my computers recovery disk. Everything was working fine until I updated windows. After the last restart (after the updates) I notice that I am getthing this icon on the bottom right:And if I try to open the Volume controls it opens this window:I removed Windows Vista and now Im using Windows 7 (and thats why I came to this forum) in the hopes that it would fix the issue but it didnt. On Device manager I have no Sound devices:
View 2 Replies View Relatedmy laptop is DELL inspiron 1564 and i dont have why there is "undetected device" in the device manager and also the memory card slot isnt working..
View 1 Replies View Relatedthis device is being used by another application. please close any devices that are playing audio to this device and try again. is what it is saying when i try to test , its hdmi ti hdmi from pc to tv i got picture but no audio and cable works fine on frineds pc and tv?
View 2 Replies View Related