i cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is: ASUS - K52JC
2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )
i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook
but couldn't find device ID, because it is not listed on device manager
My laptop config: Sony vaio (E- series) VPCEB24EN with intel i3 M350 @2.26 GHz processor, 512 MB ATI graphic card, 3Gb RAM. PROBLEM:Recently my laptop harddisk got repaired, i had thosiba MK3265GSX HDD with (320GB storage area, 8 MB buffer size & 5400 rpm). I replaced it with seagate ST9750420AS(750 GB, 16MB buffer size & 7200 rpm). Also previously i had only windows 7 Home basic 64-bit so, i purchased home professional with 64-bitfter installing my new OS i downloaded my drivers s/w, everything got installed except my intel HD graphic driver & it showed the message "minimum system requirement is not met" Also, in my device manager intel graphic not appeared in 'display device'. But, my ATI graphic driver is working properlyAlso, i tried with my older recovery CD which had home basic but when windows tried to install setup my harddisk is not detected since i changed it recently.i tried every possible solution but couldn't able to find exact reason.
i have a deskjet 4280 all in one printer and it will not print a test sheet or for that matter it just will not print anything!! i have done about everything i found on websites to correct this matter and have installed the hp diagnosis program for this and tried everything it has told me and still it doesn't work.
my AIO printer is listed in Windows 7 Device manager as printer and fax separately.Printer acts as a fax machine I am not able to use windows fax and scan modem facility in my windows How can I change the present set up
I have a hp pavilion dv9700 running windows 7 home premium,and the atheros wireless device keeps disapearing out of the device manager and stops working sometimes it works again if i reboot ,i have tried a replacement but the same happens.
How do i figure out what driver or even component windows wants software for when in the device manager under other devices it lists an unknown device and windows update cannot find anything.
Oh and is it appropriate for me to use this topic to ask another question regarding explorer.exe as while i am inside a folder i delete (by choosing delete from the context menu in the tree view) while inside that folder on this particular laptop PC explorer. always crashes, collect information, sends it and restarts explorer. I have not experienced this problem on any other pc running any version of windows 7, oh and the same happened with build 7264 x32 and the current install of build 7600 x64.
Have recently purchased a small usb inspection snake camera with led light and when testing it plugged it into two desktops computers (one xp pro not sure of the other as it was a network work computer) It automatically loaded the drivers and brought up a screen automatically with the realtime image.(no driver disc came with it). However plugging into my windows 7 64bit sony laptop it signals a connection beep, loaded drivers automatically but wouldn't open or show up on my computer disc manager as an external usb source to click on. It does however show up on device manager as a usb camera and when I unplug and replug in it disappears and reappears so I know I have the right camera (not the lap top webcam inbuilt one that shows USB 2 Camera). Have tried updating drivers automatically and uninstalling it etc. Need it to work on the lap top so it can act as the movable screen for it?
If i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
My device shows in device manager with yellow exclamation. when try to update it says my drives are up to date when i restart it tells me cant find suitable drives for this device.
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
When I disable the network controller in Device Manager, the controller is disabled but nothing changes in Device Manager to identify the device as being disabled. When I used to do the same thing in Windows XP, the device icon turned yellow. Is there some setting to identify disabled devices in Win 7's Device Manager?
I installed Windows Vista using my computers recovery disk. Everything was working fine until I updated windows. After the last restart (after the updates) I notice that I am getthing this icon on the bottom right:And if I try to open the Volume controls it opens this window:I removed Windows Vista and now Im using Windows 7 (and thats why I came to this forum) in the hopes that it would fix the issue but it didnt. On Device manager I have no Sound devices:
When I go to the device and printer window there is nothing listed. There are printers and devices on the computer because everything works with the exception of the Bluetooth. The printer prints, but I have no way of knowing what is in the queue. This may have never worked since the beginning. I don't know if this is related, but, Internet Explorer does not work. I have downloaded it at least 4 times with the same results. It will not open.
I just bought a new ASUS computer with Windows 7. I have a Macbook Pro and would like to transfer my photos and music onto my new computer. I have 2 external hard drives that work perfectly fine on my mac as well as other PCs. When I plug either of my external hard drives in they are recognized in device manager and say they are working properly but are not recognized in disk manager or under my computer...
my Internet explorer 7 has been totally deleted and I think this is most of my problem with my other programs. My device manager wont work at all, the error msg says that it will not work on any Internet exp. earlier than 5.5. So I need to reinstall IE7? How do I do that (free) And my windows help wont work either.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 4 RAM: 3894 Mb Graphics Card: Intel(R) HD Graphics, 1723 Mb Hard Drives: C: Total - 59999 MB, Free - 18572 MB; D: Total - 540376 MB, Free - 539870 MB; Motherboard: Dell Inc., 0WXY9J Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
I have an acer aspire 5610z and i know it is not compatable with windows 7 according to acer but everything works apart from the audio!when i go onto device manager there is no audio tab but when i go to system> there is a "high definition audio controller" which i have been trying to install the audio drivers to because the usual audio device is not there in device manager.I have done a fresh install and updated the majority of the drivers but i cannot find the audio one anywhere ive tried downloading the vista one and running it in compatibility mode and it is a realtek one that is reccomended.
how to install a mobile broad band dongel and in device manager the device ends with #2 the device was ok at first but when switched off computer the diver seemed to re-install leaving #2
I have my Dell N4010 Inspiron 14R laptop/notebook with the OS of windows 7 32bit Ultimate.
My bluetooth was previously working fine with the driver Dell wireless 365 Bluetooth Driver 6.2.1.100 A00 win 32/64bit R273580. I notice that this past days when i connect my N6120c phone via bluetooth, my laptop didn't have any reaction, when i see my system tray no bluetooth icon was presented, previously there it is. So i manually run the bluetooth through BTTray.exe from CProgram FilesWIDCOMMBluetooth Software, but my laptop didn't react to it. So i look at the device manager and there was no trace of bluetooth, previously there was a Peripheral Bluetooth. So i manually re-install the driver and then its stuck on this page, Activate Bluetooth using Wireless Switch, on the lower right it say Cancel Installation.
I have a new Dell all in one PC with Windows 7The PC cannot see the DVD/CD driveNot seeen in device managerI have done a google search on this topic and I am a newbie and I am not ok making registery changes that are recommended in the google searc
Looking at Device Manager, I have the following two items with that yellow "!" mark. Might any tell me how significant these are, and what they exactly pertain to ? How do I correct ? Should I bother ?
After recently fixing my issue with Intel's HD graphics not installing properly it came to my attention that Device Manager sometimes cannot detect the Intel Driver in Display adapters, to be precise IF i shut-down the PC then boot it won't show Intel's HD Driver it only shows this
My synaptics pointing device has disappeared from my computer. The mouse would appear on the screen but with no movement. Had to enable a usb mouse.
I've had the mouse disabled before, I would go into Device manager to re-enable. Now it isn't even showing up in Device Manager. There wasn't an option for 'mouse or pointing device' until I installed the usb mouse.
I recently installed new software (2 weeks ago) with no problems, until now. I am using a HP Pavilion g w/ Windows 7. I've tried reinstalling the software, but the computer just won't recognize the device.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Professional, 32 bit Processor: Intel(R) Celeron(R) CPU 550 @ 2.00GHz, x64 Family 6 Model 22 Stepping 1 Processor Count: 1 RAM: 2038 Mb Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 4 Mb Hard Drives: C: Total - 63446 MB, Free - 19500 MB; D: Total - 10239 MB, Free - 5030 MB; F: Total - 105243 MB, Free - 81504 MB; G: Total - 99997 MB, Free - 23374 MB; P: Total - 99999 MB, Free - 95577 MB; Motherboard: Dell Inc., 0U990C Antivirus: Avira Desktop, Updated and Enabled
For a while now, I've had problems with USB devices, but today I was looking online and someone mentioned a solution to a problem I was having, saying to look in Device Manager under the Ports tree.My Ports tree in DM is gone, but I also don't know how to access my COM3 port or other ports any other way. Should the Ports tree be there? I've already restarted my computer and entered the BIOS menu, and it said my USB Ports were enabled.I've already been to the Registry Editor in Blah-Blah key and entered "3" (was already that way).My ports are just gone. What should I do?
I had a problem with the computer after a storm it turns to not have internet. After I checked and saw I could'n connect to internet through the modem with a broadband connection. Than checked Device Manager and there was not a network controller and everything was in order no question marks or yellow rectangles. Than tried to re install windows 7. After I tried to install the realtek driver for me LAN it show up the message The RealTek Network Adapter/Controller was not found.
wanted to add here are the ones in the device manager with the yellow signs, all under Network Adaptors, couldn't get on internet looked in device manager and all yellow signs on everything under network.
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
i am new to windows 7, just upgraded to windows 7 pro i have encounter a problem where when i right click "My Computer" and click on "Manage" an error regarding file associate popped up ... but i am able to open through Control Panel ... (this problem did not occur few days back)
I have a recently bought 500GB external hard drive (NTFS) which I want to partition to have a 100GB partition formatted to either FAT32 or Mac Extended Journaled.I have 228gb free on the drive, but when I go to Shrink Volume in Disk Management, it says I only have 342mb available?!I've tried de fragmenting the drive, but that doesn't seem to There isn't any software left that came with the HDD, so it can't be that
I have a first generation envy 14 running windows 7 HP. Ports (COM and lpt) were showing up and working fine up until I reformatted the computer. I then noticed that they were gone. I installed all the drivers for my machine, most notably the chipset drivers, from the HP website. I enabled "show hidden devices" in device manager. I reformatted again, including trying windows 8 beta, and then back to 7.
I went through the bios to look for an option to turn ports on or off, and couldn't find it. So I updated to the latest bios and checked again, including finding a way into the advanced menu. I'm at a loss now... its like the ports don't exist?
