Absolutely Nothing Listed In Device And Printer Window
Nov 21, 2011
When I go to the device and printer window there is nothing listed. There are printers and devices on the computer because everything works with the exception of the Bluetooth. The printer prints, but I have no way of knowing what is in the queue. This may have never worked since the beginning. I don't know if this is related, but, Internet Explorer does not work. I have downloaded it at least 4 times with the same results. It will not open.
View 3 Replies
ADVERTISEMENT
Aug 22, 2012
my AIO printer is listed in Windows 7 Device manager as printer and fax separately.Printer acts as a fax machine I am not able to use windows fax and scan modem facility in my windows How can I change the present set up
View 1 Replies
View Related
Nov 1, 2009
i have a deskjet 4280 all in one printer and it will not print a test sheet or for that matter it just will not print anything!! i have done about everything i found on websites to correct this matter and have installed the hp diagnosis program for this and tried everything it has told me and still it doesn't work.
View 2 Replies
View Related
Nov 9, 2011
The device and printer window is empty. Almost everything is working except blue tooth and IE9. However, there is no device or printer noted.
View 1 Replies
View Related
Oct 23, 2011
i cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is: ASUS - K52JC
2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )
i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook
but couldn't find device ID, because it is not listed on device manager
View 6 Replies
View Related
Jun 3, 2012
I've deleted an old question since no one replied out of 150 + viewers. some input so I can figure this out This is weird and I'm wondering if you have these printer issues?
I have a HP Officejet 6500A Plus Printer. (all in one) In Windows 7 under Disk Manager my printer is listed as a Hard Drive thats weird. The printer is connected with a USB cable so I think the system and the drivers think it a flash drive.
Is this normal? Or can it be fixed? If so how? HP and MS have not repiied to my Quieies. My printer works but I'd like to know why.
View 4 Replies
View Related
Jul 22, 2012
My laptop config: Sony vaio (E- series) VPCEB24EN with intel i3 M350 @2.26 GHz processor, 512 MB ATI graphic card, 3Gb RAM. PROBLEM:Recently my laptop harddisk got repaired, i had thosiba MK3265GSX HDD with (320GB storage area, 8 MB buffer size & 5400 rpm). I replaced it with seagate ST9750420AS(750 GB, 16MB buffer size & 7200 rpm). Also previously i had only windows 7 Home basic 64-bit so, i purchased home professional with 64-bitfter installing my new OS i downloaded my drivers s/w, everything got installed except my intel HD graphic driver & it showed the message "minimum system requirement is not met" Also, in my device manager intel graphic not appeared in 'display device'. But, my ATI graphic driver is working properlyAlso, i tried with my older recovery CD which had home basic but when windows tried to install setup my harddisk is not detected since i changed it recently.i tried every possible solution but couldn't able to find exact reason.
View 2 Replies
View Related
Mar 11, 2011
I have a laptop with windows 7 and three different accounts on it. two of the accounts are just standard user and one is a administrator. On the administrator account you can print to my printer, but on the standard accounts you can't. I have made sure that the printer is set to be the default and it does list the printer but says it is offline.
View 1 Replies
View Related
Apr 26, 2011
having moved once and having add and removed computers from my home network, along with other changes, I now have a cluttered Printer Selection Window, by which I mean the window that pops up when I want to print a document. I have five versions of a Brother printer and four versions of an HP printer, and only one of each is actually good. How do I clean up that window by getting rid of those obsolete references that no longer work? It's ridiculous that they don't simply disappear when I select one of them as the default.
View 5 Replies
View Related
Jul 8, 2011
I have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies
View Related
Jul 21, 2011
Which Office 2010 Home and Student Edition fonts are absolutely necessary? Or to put it another way, which fonts (that are typically installed in a normal Office installation) is it safe to delete? There are waaay too many of these dubiously styled fonts cluttering my Windows 7 Pro system; I want to pare things down and make room for higher quality fonts.
View 7 Replies
View Related
Oct 31, 2012
Earlier this morning I was on my laptop, and I must have knocked it or something, because the battery fell out and as a result it shut down. A minor annoyance I thought, but nothing extreme.
I then tried to start the computer up again and it told me "Windows failed to start. A recent hardware or software change might be the cause"
This had come up before and I always just pressed "Start windows normally" and it works fine. However, this time when I tried it, it didn't work fine. The windows logo didn't come up on the "Starting Windows" screen, and it came up with the "Windows is loading files..." bar that typically comes up on startup repair.
I figured hey, I'll let it do it's thing. It came up with the grey background (The one that it typically loads startup repair on) but it just stayed like that. No box coming up telling me the progress. Nothing, just a screen. The mouse cursor is there and I can move it, but nothing happens.
I thought it might just be slow, went out for a cigarette, came back and nothing had changed. I shut the laptop down and tried to run start up repair. The same thing happened. I shut it down again, pressed ESC and tried to run system recovery. Same thing happened. I tried to run safe mode and the same thing happened again. I tried to run the last known good configuarion and - you guessed it - same thing again.
I have a HP Pavilion g6 with Windows 7 and that's all I know about it. I don't have the windows 7 discs since I left them when I came to uni - it's under warranty but I also left the recipt so I can't take it back either ha.
View 1 Replies
View Related
Jun 12, 2012
i want to wi-fi driver for 3.2 window experience index 64 bit
View 1 Replies
View Related
Aug 12, 2012
I have Windows 7 Home Premium 64bit with a Realtek HD Audio sound card. Whenever I use several headphones in the front jack, they all work perfectly fine. However, whenever I have my speakers (I tried using 2 different pairs of speakers to make sure it wasn't just one pair being affected) SECURELY inserted into the back green port of my computer, there is sound only coming from the left speaker while the right speaker is playing absolutely no sound. This happened to both pairs of speakers that I own.
I have tried the following and none worked:
- Update drivers
- Disable speaker and then enable
- Switching from back jack to front jack (vice versa)
- Balancing so that both L and R sounds are at an equal level
None of these common solutions that I found on this site have worked.
View 9 Replies
View Related
Dec 16, 2012
I downloaded Printers' drivers, one for HP and the other for Epson by accessing their web-sites.Both are USB-connection and working fine, however icons of both printers on, ... Start > Device and Printers,.... there are no printers' icons, even though other devices, such as thumb-drive, monitor, keyboard and others.Just wonder why icons of both printers are missing on 'Device and Printer?'
View 1 Replies
View Related
Jan 3, 2012
I noticed an interesting attack on my fully patched windows 7 home premium system at the standard user level: I don't know exactly how this was done, but I do have some traces (Keep in mind that I had disabled UPnP services beforehand):
1. Auto proxy checker had executed.
2. Teredo Tunneling and about 15 ISATAP tunneling adapters were created.
3. Malware successfully bypassed my two-way firewall and transmitted to the outside.
It looks like malware is able to successfully use ipv6 Teredo Tunneling and ISATAP tunneling to confuse my two-way firewall and use tunneling loops to send traffic outside. I had UPnP blocked, but they used tunneling tricks to bypass the firewall rules.Because the use of tunneling loops bypassed my firewall rules I would like to permanently disable the actual services for VPN and tunneling on my Windows 7 machine. What services need to be disabled to make my Windows 7 machine absolutely VPN and tunnel proof?
View 4 Replies
View Related
Feb 2, 2012
I just built a new computer everything is completely compatible with each other. I installed windows 7 pro 64 bit and i seem to be having problems accessing certain details in my control panel. I can't run windows rating index or device management the window just freezes up. the same is happening for trying to open the action center the windows just seem to keep freezing. when in safe mode everything runs perfectly fine but when i restart back to normal the same problem occurs anyone know what might be causing this? I don't have a virus the computer has been running for not even a day with limited internet use.
View 3 Replies
View Related
Apr 30, 2012
I got this PC 3 weeks ago. For two days now Several of my devices have a Code 10 on start up. For instance my mouse in the Device Manager window has a code 10 and will not work until I use the trouble shooter and it re-installs the driver. I have tried updating the USB drivers as many recommend but there were no updates. I tried Microsoft's fix it, and it was not fixed.
View 9 Replies
View Related
Aug 15, 2011
I have a Del 1600N Multi function printer that has been in use (successfully) for about two years on my home network. The printer has a built in NIC and is connected via a dedicated 10BaseT line to my network. This printer was working just FINE until I decided to use it as a fax. Some how during that process I must have cleared the network configuration and it stopped being visible on my network. After some investigation into this I was able to get it back on the network my manually assigning it an IP address. Using the supplied installation DVD, I was able to install the printer onto my two desktop computers (running XP Pro 32 bit) and it works just as well as before.
The problem occurs with my wife's Dell laptop. Before the great "fax fiasco" (as I like to call my stupid attempt to use this printer as a fax machine), the laptop was able to find and print to this printer with very little problems. Now, not so much! When I went to re-install this printer the first time I made sure that the Dell Printer software was uninstalled (via Control Panel--Uninstall Programs). The first attempt seemed to be going fine. The software detected the printer on the network and it looked like a successful install. However, the test page did not print out! I checked in the "Printer Properties" to make sure that the printer was on line and sure enough, it was.
But there was a troubleshooting alert that told me the document didn't print. After several hours of messing with it, I decided to uninstall and try again. The second time went much like the first. Then I reasoned that the drivers may be the problem. So I looked on Dell's web site and found the Windows 7 drivers for this printer. I uninstalled the old drivers, downloaded the new ones and then installed. As before it found the printer. But during the install it flashed a message saying that it could not find a file (which was weird).
When I hit "continue" it proceeds and looks like it finishes. The network printer monitoring icon appears in the system tray and I can see the 'scanner" portion of this Multifunction Printer. But still, it won't print to it. And in addition, the printer now refuses to show up in the "Printer and Devices Window"! What am I doing wrong? I've heard that Windows 7 has problems with old printers. But this printer was working perfectly before this! What steps do I need to do to totally remove the old printer drivers and start from scratch? Is there a way to get this printer to be able to work with my wife's Dell Laptop?
View 1 Replies
View Related
May 10, 2012
not installing Hp laser jet 1300 in my system?
View 2 Replies
View Related
Oct 30, 2009
device & printer icons are missing in window 7. How do I fix them
View 5 Replies
View Related
Nov 9, 2012
I had vista once I switch to windows 7 my hp deskjet f4100 series printer the operationg system won't run and the system no longer have printer physically showing in hardware
View 2 Replies
View Related
May 22, 2009
I cannot seem to add a printer. The menu comes up with two displays; Add a device and Add a printer. The Add a device works but the Add a printer just blinks and returns to the screen.
View 5 Replies
View Related
Feb 8, 2012
Issue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
View 1 Replies
View Related
Mar 3, 2011
I have purchased a D-Link 1040 wireless print server and have connected it to my printer using a USB connection. I have installed the software. I turned the power on and pressed the little button on the side of the print server to enter search mode. In Windows 7 I tried adding a device but my computer can't find it.I suspect I may have to make some network connection or adjustments using my wifi modem. How to proceed?
View 7 Replies
View Related
Aug 19, 2012
New computer windows 7. Lexmark Z52 printer. Devices and Printers calls it an unspecified device and could not locate drivers. I went through the steps and did Windows Update and it found the drivers. I have tried unplugging, power off, computer off and reboot. Reboot with USB plugged in, reboot with USB unplugged. A whole host of attempts with no success. My old computer was 7 also, and I was able to find a generic fix. It was a driver (bullzip) I thought, but cant get that to work either. All I need is basic printing for check writing and regular Word stuff. No photos or graphics printing.
View 6 Replies
View Related
Jan 17, 2013
I have been trying to determine the source or cause of a printer that appears as a device on my network, however not only is nothing other than my Roku box attached to my router, I have never owned the device in question. After refreshing the page the device disappears. The screen shots below should concerned about a breach in my network but again, the router shows nothing attached that should not be already.
View 4 Replies
View Related
Feb 16, 2012
Whenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
View 6 Replies
View Related
Aug 22, 2012
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
View 5 Replies
View Related
Jan 26, 2011
I'm Running Windows 7(64bit)Each time I boot into Windows 7 Prem (64) a open window apears requesting my username at the top of the open window to specify a a program to open it?I've clicked on note pad and I get the following information that apears, each time though it requests, or looks for a program to use to open.
===========================================================================
Interface List
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter
16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
[code]....
View 1 Replies
View Related
Jul 24, 2012
My problems continue with Win 7's faulty 'file associations' subroutine. Have a friend with a new Toshiba Core i5 on which he has MS Office 2003 Professional fully installed, including PowerPoint. Three weeks ago, he complained that he could not open .pps files attached to e-mails, so he brought the computer to me. I opened the file associations subroutine, found .pps in the list of extensions, and ultimately (tha'ts another whole story) got MS PowerPoint registered as the default program to open such files.Today he claimed he got another e-mail with a .pps attachment, and could not open it, so brought the computer to me again. I don't know why he wasn't able to open it, because I called up the e-mail, clicked the .pps attachment and it opened perfectly. However, I opened the /Default Programs/Set Associations list and scrolled down to see what the .pps entry said was the current default.
View 2 Replies
View Related
