Wireless Mouse Showing Code 10 In Device Manager Window?
Apr 30, 2012
I got this PC 3 weeks ago. For two days now Several of my devices have a Code 10 on start up. For instance my mouse in the Device Manager window has a code 10 and will not work until I use the trouble shooter and it re-installs the driver. I have tried updating the USB drivers as many recommend but there were no updates. I tried Microsoft's fix it, and it was not fixed.
HeI am at wits end here trying to figure out how to fix this pc. A friend came to me with the Acer Aspire One D255E with a wireless internet issue. The PC is Running Windows 7 Starter 32-bit. I immediately thought "well there must be a switch that she turned off" There is no switch on the computer for the wireless card. I thought "well there must be a driver issue, Ill go to the device manager and update the driver for it". Then when I got to the device manager... Nothing shows up for a wireless lan card even existing in the laptop, but I know it does, because A) It's a "net Book" B) she was using the internet last week. So, I thought maybe it's not showing up because thee computer needs the drivers for it first, which is unusual, but since its windows 7 starter I thought it needed a kick in the rear to get it goin. So i downloaded all the drivers for the PC using a different computer, and installed the different drivers to see which one would work. Well none of them worked, and now im sitting here scratching my head on what to do next. I have scoured the web and seen a few other people with issues like this.
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
I have a hp pavilion dv9700 running windows 7 home premium,and the atheros wireless device keeps disapearing out of the device manager and stops working sometimes it works again if i reboot ,i have tried a replacement but the same happens.
I had vista once I switch to windows 7 my hp deskjet f4100 series printer the operationg system won't run and the system no longer have printer physically showing in hardware
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
Somehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
Yesterday I got my friend to download windows 7 on my mac via bootcamp. I got it back today and I tried my wireless at home but didn't work. So I tried LAN line as well, which didn't work either. I went through few sites, they all told me to go on device manager and update my drives. The problem is that i can't find either modem or network adapter on my device manager.
device manager showing coprocessor without drivers cant find what its supposed to be updates won;t install downloaded all relevant drivers from asrock and nvidia but still no luck .anyone any ideas what this could be?
My synaptics pointing device has disappeared from my computer. The mouse would appear on the screen but with no movement. Had to enable a usb mouse.
I've had the mouse disabled before, I would go into Device manager to re-enable. Now it isn't even showing up in Device Manager. There wasn't an option for 'mouse or pointing device' until I installed the usb mouse.
I recently installed new software (2 weeks ago) with no problems, until now. I am using a HP Pavilion g w/ Windows 7. I've tried reinstalling the software, but the computer just won't recognize the device.
Issue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
I have an HP-dm4 2070us and the touchpad will not work. When I go to hidden devices and the driver( Alps) for it is flagged that its not working properly and has an error code 24 for not working or present. I updated the driver and bios (and before that tried rolling back the bios. I even go to Update Driver and it says it's updated and no issues, but then when I exit back out to the main list the error code is still there and it doesn't work. I have to use tab as I don't actually have a mouse. I am on a different computer now. Another HP that I can't get the wireless printer to work on (which is an HP - a gift, otherwise I at this point would not have purchased another HP product).
I've had this problem with my Windows 7 64bit OS ever since it updated a while back (I'm not sure what updates). The wireless adapter that was already installed stopped working, then two successive new wireless adapters (both usb) failed to work as well. The computer just refuses to detect them (although it beeps to indicate it knows a device has been plugged in). A lot of the methods I searched for to fix this issue told me to look in Device Manager, which is empty... None of the methods I've found have worked (Editing permissions etc). I'm tempted to just re-install Windows.
In Windows Home Premium 64bit we encounter this problem on a machine after trying to uninstall a norton product manually.The norton software led to serious problems of randomly emerging BSODs.As system uninstall did not work we researched a tutorial on how to manually uninstall the soft.t can be found here Enterprise Support - Symantec Corp. - How to manually uninstall the Symantec Endpoint Protection client from Windows Vista, Windows 7, and Windows 2008 R2 64-bitEverything worked smoothly until the last three steps of the routine failed (12.-14We can not uninstall/delete the wireless network adapters as described. After clicking "uninstall" there is the window that asks for confirmation (to uninstall) but after clicking "yes" the device manager window simply refreshes - and the device remains unchanged.
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
I just bought a new ASUS computer with Windows 7. I have a Macbook Pro and would like to transfer my photos and music onto my new computer. I have 2 external hard drives that work perfectly fine on my mac as well as other PCs. When I plug either of my external hard drives in they are recognized in device manager and say they are working properly but are not recognized in disk manager or under my computer...
How do i figure out what driver or even component windows wants software for when in the device manager under other devices it lists an unknown device and windows update cannot find anything.
Oh and is it appropriate for me to use this topic to ask another question regarding explorer.exe as while i am inside a folder i delete (by choosing delete from the context menu in the tree view) while inside that folder on this particular laptop PC explorer. always crashes, collect information, sends it and restarts explorer. I have not experienced this problem on any other pc running any version of windows 7, oh and the same happened with build 7264 x32 and the current install of build 7600 x64.
Have recently purchased a small usb inspection snake camera with led light and when testing it plugged it into two desktops computers (one xp pro not sure of the other as it was a network work computer) It automatically loaded the drivers and brought up a screen automatically with the realtime image.(no driver disc came with it). However plugging into my windows 7 64bit sony laptop it signals a connection beep, loaded drivers automatically but wouldn't open or show up on my computer disc manager as an external usb source to click on. It does however show up on device manager as a usb camera and when I unplug and replug in it disappears and reappears so I know I have the right camera (not the lap top webcam inbuilt one that shows USB 2 Camera). Have tried updating drivers automatically and uninstalling it etc. Need it to work on the lap top so it can act as the movable screen for it?
If i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
My device shows in device manager with yellow exclamation. when try to update it says my drives are up to date when i restart it tells me cant find suitable drives for this device.
Lately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
i'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
[code] On checking my event log after some slow response, I noticed that I am getting: Desktop Window Manager is experiencing heavy resource contention.Reason : Graphics subsystem resources are over utilised.I am using Windows recommended settings. Mozilla on the main screen and outlook express on the slave screen.Ran the usual clear temp files and ran malwarebyes and superantispyware scans.I am not playing any games or music, just browsing one website (secure) and outlook express, why am I getting resource contention on the Desktop Window Manager?
my dmw is crashing sometimes, mostly when i watch Internet or other videos online... i get this error or the pc freezes and i need to restart or logoff to get it to work: [code] if the online privacy statement is not available, please read our privacy statement offline:c:windowssystem32en-userofflps.txt.
I have window 7 64 bits works on hp pavilion dv3 laptop The problem is that every time I push F2 or F4 or F4 or F6 .....F8 F10 .......etc I see the "window boot manager " screen it does not work like before whereas every single key takes you to a specific screen How to get rid of this problem ?
I updated the driver for my PCI-e video card and it worked good, but got a message that said my "Desktop Window Manager is disabled". What does that mean and should I have it enabled?
i cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is: ASUS - K52JC
2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )
i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook
but couldn't find device ID, because it is not listed on device manager