Issue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
View 1 RepliesI got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies View RelatedSomehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
my AIO printer is listed in Windows 7 Device manager as printer and fax separately.Printer acts as a fax machine I am not able to use windows fax and scan modem facility in my windows How can I change the present set up
View 1 Replies View RelatedI got this PC 3 weeks ago. For two days now Several of my devices have a Code 10 on start up. For instance my mouse in the Device Manager window has a code 10 and will not work until I use the trouble shooter and it re-installs the driver. I have tried updating the USB drivers as many recommend but there were no updates. I tried Microsoft's fix it, and it was not fixed.
View 9 Replies View RelatedI had vista once I switch to windows 7 my hp deskjet f4100 series printer the operationg system won't run and the system no longer have printer physically showing in hardware
View 2 Replies View Relatedi have a deskjet 4280 all in one printer and it will not print a test sheet or for that matter it just will not print anything!! i have done about everything i found on websites to correct this matter and have installed the hp diagnosis program for this and tried everything it has told me and still it doesn't work.
View 2 Replies View RelatedBootmgr is missing and I've tried every way but reinstalling. I want to reinstall but when it says expanding files it stays on 0 for 30 mins then a error message comes up and I can't reinstall.
View 9 Replies View RelatedWell first of all I started up my PC and it immediately jumped into Startup Repair maybe cause I didn't shut it down properly. It went through the repair and several times. By then I knew something was wrong, I checked the Diagnostics and see what Startup Repair had actually done. It turns out it could not fix an error with the OS Loader.It came up with two error code (0x2) and (0x490).I followed the following instructions:
1. bcdedit /export C:BCD_Backup
2. C:
3. cd Boot
4. attrib bcd -s -h -r
5. ren C:BootBCD BCD.old
6. bootrec /RebuildBCD
I also tried using /FixMBR and /FixBoot However none of these worked and my I tried booting up it came up with the same problem. I went back into the Windows 7 DVD and ran Startup Repair again. It said it was completed successfully but it said also if it doesn't boot then there's something wrong.Which leads to my new error screen that never goes away everytime I switch on the PC. The error message is as follows:A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair You Computer," and then choose a recovery tool.Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver sginature enforcement.
File: WindowsSystem32Winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
If I try and press ENTER it will take me to the boot menu and if I press ENTER to select an OS (I only have one) then it will jump back to the previous screen.
my computer is upgraded from Vista to 7. I am getting a device manager restricted error.
View 1 Replies View RelatedWindows 7 ultimate 64, my Atapi iHAS124 B ata CD/DVD device keeps "disappearing" try running the Microsoft "fis it now"...and get A driver service for this device has been disabled. An alternate driver may be providing this functionality. Code 32 Tried uninstalling the device and installing new drivewr....same result. This is the 2nd time it has happened...last time I ended up having to rebuild the system from scratch.
View 7 Replies View RelatedD3d device error code 2005530516?how to solve this error?
View 1 Replies View Relatedi have a toshiba satellite l555d and i turn on the USB device say a error code 43.
View 3 Replies View RelatedFirst I want to say that the drive works without problems at the correct speed. The problems come upon disconnect. I also want to to stress that USB 2.0 discs are working flawlessly. If I use safe eject and the look in the device manager I get an error 47 saying that it has been shut down but not disconnected, it also says I can rectify it by disconnecting and reconnecting but this does not work. If I do so the drive will not be recognized. The enclosure has a power switch. After a safe eject I have tried both pulling the USB cable while power is still on and also going the other way by first shutting the power down. In both cases the error 47 shows in device manager. When this happens the CPU load goes up to about 20% and stays that way when it before was around 0 at idle. If I reboot the drive reconnects and I have no problem with it unless I try to safely eject it again.
View 2 Replies View RelatedI clicked on Device Manager > Other Devices > Mass Storage Controller. Under Device Status it said, "The drivers for this device are not installed. (Code 28)."
I don't know what device they are talking about. All the storage devices on my PC seem to be working. Why does DM think there is a Mass Storage Controller at location PCI bus 7, device 1, function 2? I clicked on Update Drive - search failed to find a driver and suggested none needed. I clicked the Uninstall button and the message dissapeared until I rebooted the system.
Can somone tell me why Windows 7 might think there is a Mass Storage Controller on my PC?
I have a Dell Vostro laptop running windows 7 64bit. Up until a week ago all was workinh fine and has been for some time. Then my printer stopped being recognized and Windows reported it was due to code 43. I've tried the normal options - unistall universal bus controllers, take laptop battery out etc but nothing fixes it.
View 3 Replies View RelatedPrinter not activated - error code 30
View 1 Replies View RelatedI have an HP-dm4 2070us and the touchpad will not work. When I go to hidden devices and the driver( Alps) for it is flagged that its not working properly and has an error code 24 for not working or present. I updated the driver and bios (and before that tried rolling back the bios. I even go to Update Driver and it says it's updated and no issues, but then when I exit back out to the main list the error code is still there and it doesn't work. I have to use tab as I don't actually have a mouse. I am on a different computer now. Another HP that I can't get the wireless printer to work on (which is an HP - a gift, otherwise I at this point would not have purchased another HP product).
View 1 Replies View Relatedi don't have any sound, Windows 7 says that no Audiodevice (in system control) installed and Windows 7 says (in device manager) Device can't be startet. (Code 10).
I'm using a Toshiba Satellite P100 Notebook
I attempted to install Vista or XP 32Bit driver but it flop's the message "Device can't be startet" or bluescreen.
Have anybody the same error and fixed it?
I have windows 7 and keep getting a error 80072efe code while trying to download my new printer, and it will not let me, every time I use a fix says not compatible or they want to charge me?
View 1 Replies View RelatedI have a Desktop computer with Windows 7 (32 bit) and a laptop with Windows 7 (64 bit). I'm trying to set up a network printer, so I can print from my laptop using my desktop computeer printer. I've set up my wireless computer which uses Windows Xp just fine, and can print from that computer. But when I try to add a network printer on my laptop, as it's finishing installation, an error message pops up saying "cannot connect to printer" error code 0x0000000d. Any feedback would be greatly appreciated. Is it possible to set up a 64 bit with a 32 bit computer?
View 3 Replies View RelatedI have installed sage line 50 on my new computer running windows 7 and when i try to save an invoice in PDF form to email, i keep ketting printer not activated error code 30..
View 1 Replies View RelatedI'm getting this error, but I can still print locally and from the network.
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 2/4/2013 8:15:49 AM
Event ID: 315
Task Category: Sharing a printer
Level: Error
Keywords: Classic Spooler Event,Printer
[Log] ........
I just bought a new ASUS computer with Windows 7. I have a Macbook Pro and would like to transfer my photos and music onto my new computer. I have 2 external hard drives that work perfectly fine on my mac as well as other PCs. When I plug either of my external hard drives in they are recognized in device manager and say they are working properly but are not recognized in disk manager or under my computer...
View 1 Replies View RelatedI have a hp pavilion dv9700 running windows 7 home premium,and the atheros wireless device keeps disapearing out of the device manager and stops working sometimes it works again if i reboot ,i have tried a replacement but the same happens.
View 4 Replies View RelatedHow do i figure out what driver or even component windows wants software for when in the device manager under other devices it lists an unknown device and windows update cannot find anything.
Oh and is it appropriate for me to use this topic to ask another question regarding explorer.exe as while i am inside a folder i delete (by choosing delete from the context menu in the tree view) while inside that folder on this particular laptop PC explorer. always crashes, collect information, sends it and restarts explorer. I have not experienced this problem on any other pc running any version of windows 7, oh and the same happened with build 7264 x32 and the current install of build 7600 x64.
Have recently purchased a small usb inspection snake camera with led light and when testing it plugged it into two desktops computers (one xp pro not sure of the other as it was a network work computer) It automatically loaded the drivers and brought up a screen automatically with the realtime image.(no driver disc came with it). However plugging into my windows 7 64bit sony laptop it signals a connection beep, loaded drivers automatically but wouldn't open or show up on my computer disc manager as an external usb source to click on. It does however show up on device manager as a usb camera and when I unplug and replug in it disappears and reappears so I know I have the right camera (not the lap top webcam inbuilt one that shows USB 2 Camera). Have tried updating drivers automatically and uninstalling it etc. Need it to work on the lap top so it can act as the movable screen for it?
View 29 Replies View RelatedI am running Windows 7 and yesterday my wife bought an HP 3512 printer. It has wireless capabilities, so she thought it would be nice to be able to print from other computers or tablets or phones in our house.I originally had issues even getting it to connect via wireless but it is now connected to my router, has an IP address, and if I log into my router, I see its connection. The printer works fine if I have it plugged in via USB. But as soon as I unplug the cable, the printer goes offline. Now, I assumed that by wireless printer, that meant I would not even need it hooked up to my desktop. Maybe I am wrong on that though.But my main issue is I cannot get the printer shared with the homegroup. If I run the printer troubleshooting, it even tells me that the printer is not shared with the homegroup and I should try to have it shard as administrator. So I click that box then it tells me it found but could not fix the issue. It's still not shared. If I go to the printer, go to properties, then sharing, if I try to click share and apply changes, I get an error saying "printer settings could not be saved. error code (0x0000000001) or something. It simply will not go onto the homegroup. If I add it to the homegroup to be shared, would that allow me to move the printer off of my desk and unplug the USB and still be able to print?Also, still regarding Homegroups. My computer is connected via wire to my FIOS router. A laptop in the other room however, connects wireless. They somehow end up in different networks and cannot join the same Homegroup. Both run Windows 7. I have looked and cannot find why they would be on different networks. They were not always this way, I use to be able to see the laptop on my desktop but no longer can.
View 9 Replies View RelatedIf i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
View 2 Replies View RelatedMy device shows in device manager with yellow exclamation. when try to update it says my drives are up to date when i restart it tells me cant find suitable drives for this device.
View 1 Replies View Related