Windows 7 ultimate 64, my Atapi iHAS124 B ata CD/DVD device keeps "disappearing" try running the Microsoft "fis it now"...and get A driver service for this device has been disabled. An alternate driver may be providing this functionality. Code 32 Tried uninstalling the device and installing new drivewr....same result. This is the 2nd time it has happened...last time I ended up having to rebuild the system from scratch.
View 7 Replies
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies View RelatedSomehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
D3d device error code 2005530516?how to solve this error?
View 1 Replies View Relatedi have a toshiba satellite l555d and i turn on the USB device say a error code 43.
View 3 Replies View RelatedIssue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
View 1 Replies View RelatedI have an HP-dm4 2070us and the touchpad will not work. When I go to hidden devices and the driver( Alps) for it is flagged that its not working properly and has an error code 24 for not working or present. I updated the driver and bios (and before that tried rolling back the bios. I even go to Update Driver and it says it's updated and no issues, but then when I exit back out to the main list the error code is still there and it doesn't work. I have to use tab as I don't actually have a mouse. I am on a different computer now. Another HP that I can't get the wireless printer to work on (which is an HP - a gift, otherwise I at this point would not have purchased another HP product).
View 1 Replies View Relatedi don't have any sound, Windows 7 says that no Audiodevice (in system control) installed and Windows 7 says (in device manager) Device can't be startet. (Code 10).
I'm using a Toshiba Satellite P100 Notebook
I attempted to install Vista or XP 32Bit driver but it flop's the message "Device can't be startet" or bluescreen.
Have anybody the same error and fixed it?
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
My webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies View RelatedI am going nuts with this problem and maybe you guys are the only ones who can help. Even Answers.Microsoft.com hasn't been able to give me a solution that works.Here's the problem:very time I start my computer and I click on an icon (on the desktop or in the Start menu), the icon disappears and this error message shows up about a dozen times:"Could not find this item. This is no longer in C:...Verify this item's location."I've done all of the following and none of them have worked: System Restore before certain Microsoft updates I get the same problem in Safe Mode The problem gets worse when I create another user account and use that account instead of the Administrator account I've replaced Avira antivirus with Microsoft Security Essentials and ran a full scan I've tried a Clean Reboot Full scans using Avira, Malwarebytes, Spybot Search & Destroy ClamWin, and various Microsoft downloadable fixes Windows Command Processor (CMD) > sfc /scannow Adding, changing, and subtracting registry entries Yelling and swearing at it... I have Windows 7 Home Premium 64bit on an HP G60 Notebook with 3GB RAM with Pentium Dual Core T4300 @ 2.10GHzThe strange thing is about ten minutes after getting these icons disappearing and error messages, the system seems to return to normal. This morning I started the computer, let it run for 20 minutes without touching anything. Then I clicked on an icon and get the same problem: it gets sent to the Recycle Bin with the error messages.
View 9 Replies View RelatedIn the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
View 1 Replies View Relatedi need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies View RelatedSo i've been playing games on my pc with a usb controller and it's been bugging but know when i plug it in a usb port i get usb unknown device does anyone know how to fix that?
View 9 Replies View RelatedI am getting this error in device manager over and over and over, i have uninstalled the driver, and reinstalled it over and over, i keep getting the same error, my hauppauge colossus card was working perfectly then all of a sudden i get this error, i have used ccleaner to repair my registry all to no avail, I think i need to do something in the registry to fix this but have no idea exactly what. What do i do?
View 12 Replies View RelatedI have a Nikon Imaging scanner which my PC detects on connection. I have the correct driver which device manager installs with a code 10 error, the device cannot start.My PC is running Windows 7 64bit. I should point out that the scanner works correctly on my old PC running Windows XP, so there is no problem with the hardware. Anyone got any ideas why I might be getting the code 10 error on my new PC?
View 6 Replies View RelatedWindows has stopped this device because it has reported problems. (Code 43). I have been sent around in circle trying to use the Microsoft fix it 'genius'. I am trying to connect my Smartphone via usb cable to computer. Battery charges but it either does not detect it at all or comes up with the above error message.
View 7 Replies View Related1. First in the device manager, my "Microsoft Virtual Wifi Miniport Adapter is getting and error that says "Windows has shut down this device (code 43)"
2. The speed of the internet spikes between normal speed(10k-18k bytes/s to around 40 bytes a second
3. In the event view there is a warning that says: "NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The entry is not found. (0x800706E1)"
4. Another problem in the event viewer: "Name resolution for the name isatap.ktechsystems.ca timed out after none of the configured DNS servers responded."
5. Yet another problem, at this point my internet slows down to an unbearable speed: "This computer was not able to set up a secure session with a domain controller in domain KTECHSYSTEMS due to the following:
There are currently no logon servers available to service the logon request.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain."
If anyone has a suggestion on how i can fix this, it would be greatly appreciated.
ps.
-internet worked fine while hooked into the router through a cable
-im network retarded
-I apologize for my ignorance
Lately I've been getting a sound prompt telling me a device is not connecting. Everything I need seems to be so I can't figure it out.
It's just a bit of a nuisance but I'd like to find out. Is there a command prompt to ask the computer what isn't connecting?
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
The drivers for this device are not installed. (Code 28)
View 2 Replies View Relatedi have hp mini note book and found usb error 43 i have reinstall all drivers but still received error
View 1 Replies View RelatedI have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
View 8 Replies View RelatedMy HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens.
View 3 Replies View RelatedI have 2 8600 GT 512 video cards, 4GB installed RAM, etc... in device manager one of the cards is enabled, one says
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
It worked fine in XP. I have 2 additional displays I'd like to control with the second video card. I do not have them connected in Sli. I uploaded a pic of the error message.
Windows 7 has stopped this device because it has reported (Code 43) usb?
View 2 Replies View RelatedWindows 7 has stopped this device because it has reported (Code 43)?
View 1 Replies View RelatedMy usb composite driver says code 10
View 1 Replies View Relatedi recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
C-Media AC97 Audio Device. This device cannot start. (Code 10). Sound hardware on ASUS Mobo will not work after installing Windows 7. Latest drivers installed.
View 9 Replies View RelatedSince about 1-2 months ago whenever I hooked up my phone (HTC Rezound) to my computer through my USB chord I get an error message saying that it's an unrecognized device and that it was stopped because the device has shown previous problems. I used to upload videos and pictures from my phone to my computer about once a week for months straight and I didn't have a problem with it. Is there any way that I can adjust something in my computer to fix this?
View 1 Replies View Related
