Error Code 0x80070015 And Boot Manager Missing
Jul 16, 2012
Bootmgr is missing and I've tried every way but reinstalling. I want to reinstall but when it says expanding files it stays on 0 for 30 mins then a error message comes up and I can't reinstall.
View 9 Replies
ADVERTISEMENT
Sep 7, 2012
Well first of all I started up my PC and it immediately jumped into Startup Repair maybe cause I didn't shut it down properly. It went through the repair and several times. By then I knew something was wrong, I checked the Diagnostics and see what Startup Repair had actually done. It turns out it could not fix an error with the OS Loader.It came up with two error code (0x2) and (0x490).I followed the following instructions:
1. bcdedit /export C:BCD_Backup
2. C:
3. cd Boot
4. attrib bcd -s -h -r
5. ren C:BootBCD BCD.old
6. bootrec /RebuildBCD
I also tried using /FixMBR and /FixBoot However none of these worked and my I tried booting up it came up with the same problem. I went back into the Windows 7 DVD and ran Startup Repair again. It said it was completed successfully but it said also if it doesn't boot then there's something wrong.Which leads to my new error screen that never goes away everytime I switch on the PC. The error message is as follows:A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair You Computer," and then choose a recovery tool.Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver sginature enforcement.
File: WindowsSystem32Winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
If I try and press ENTER it will take me to the boot menu and if I press ENTER to select an OS (I only have one) then it will jump back to the previous screen.
View 9 Replies
View Related
Mar 26, 2011
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
View 4 Replies
View Related
Nov 28, 2009
such as i wrote in the title i get error 0x80070570 when i try to install Windows 7
this the first time i face this problem because i install Windows 7 many times before on the same computer
the problem start with blue screens when i already have a Windows 7 so such as many people do i backup all my files and format C partition Then when i install Windows 7 i 0x80070570 problem so i format all of my hard disk and again i got this error
i tried alot of Solutions but all of them did not solve the problem
i tried to use system recovery options but it unavailing and it tell me boot Manager is missing or corrupt so i tried many commands like bootsect/nt60 and also no luck
now what can i do to solve this problem , can any one help me please ?
View 9 Replies
View Related
Sep 30, 2009
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies
View Related
Jun 27, 2011
Somehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
View 2 Replies
View Related
Feb 8, 2012
Issue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
View 1 Replies
View Related
Apr 17, 2011
When receiving this message on boot up attempt running windows 7 home premium on a dell 1545 laptop with a fresh install and new hard drive would the problem be hardware related or software? Any chance it could be hardware related to the motherboard or is it most likely software related to the OS install?
View 1 Replies
View Related
Oct 17, 2011
I've divided my disk into partitions and accidentally removed boot loader of windows and now I get "boot mgr is missing", so I cant load my windows I have a disk and put boot order in BIOS but it still does not give me an opportunity to install windows, so I have only openSUSE right now, and 2 partitions of windows with C: and D: disks. How to restore this bootloader or at least make install windows 7?
View 3 Replies
View Related
Dec 24, 2009
I use XP on my machine with two 300 GB HDs configured as RAID1 (Nvidia NForce 570 SLI). There are two partitions C (100 GB) for system and D (remaining 200 GB) for data. All is working fine.
Now I try to install Windows 7. First I resized D by 100 GB and installed Windows 7 on this new partition. I updated the Nvidia NForce RAID driver and can see correctly my RAID under Windows 7.
My problem now is that if I start my computer always the old XP boots up.
The Boot Manager is not present. The only way I can boot Windows 7 is to insert the
Windows 7 installation DVD (and not pressing any key) then Windows 7 is booting.
The boot manager is present but only on this new Windows 7 partition. I already tried (using EasyBCD under Windows 7) to add the old XP as a second entry in the Boot Manager but I was not able to boot XP using the boot manager.
I see the XP-Partition under Windows 7 and vice versa but it seems to be impossible to use the boot manager.
How can I install the Windows 7 Boot Manager on my XP-partition, thus I will be able to
choose whether to boot XP or Windows 7.
View 9 Replies
View Related
Feb 20, 2013
My laptop is msi laptop a msi fx420 It says BOOTMGR is missing .Before it happens I changed the active partition from the hidden partition to SYSTEM.I can't reformat it because there is no boot menu where i can change the boot priority.
View 3 Replies
View Related
Nov 26, 2009
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies
View Related
Nov 14, 2012
I'm having an issue where my Windows boot manager is missing. However when trying to repair, there isn't even a win7 installation file on any of my HDDs. However if I search for a driver that may be located in a file, I can view all of my files on my C drive.
View 2 Replies
View Related
Jan 17, 2013
i recently got a new SSD and I've installed windows 7 home premium on it. However whenever i boot into my SSD's windows 7, it says that boot manager is missing. In order to boot into windows 7, i would have to change my first boot to my CD, when it asks me to press something to boot cd, i would just leave it. It would then come to a page that allows me to choose from the windows 7 installed on my SSD and the windows 7 installed on my old hard drive.
View 4 Replies
View Related
Apr 28, 2011
I updated my BIOS as I was having a problem mentioned in one of the updates. I was using the Easyflash2 by Asus and the update succeeded but when it re-booted I got the awful news..boot mgr missing. Would my best bet be to just re-image?
View 7 Replies
View Related
Jan 4, 2013
I am trying to install Windows 7 in Parallels on an iMac, but with no luck. I have spent hours with Apple and Parallels but they cannot succeed in helping me either. It all stumbles on the classic "Boot manager missing". Now, the question is, is it possible that this is because the Win 7 CD is faulty, or does anyone have any other solution? Ctrl+Alt+Del obviously does not work, as I am on a Mac.I have tried using a disk image. No luck.I have tried to de-activate the storage disk, leaving only the SSD with Mac Mountain Lion active.
View 1 Replies
View Related
Dec 17, 2012
I just installed a new window 7 ultimate os to my 32 bit system and I doing something with my disk management. I actually delete the 21mb unallocate space in my disk management. After that I do some my work and browse the internet and shutdown the system but when I again starting my computer. It will nor work only a message appear on screen ...
Boot manager is missing ..
Press cltr+altr+del to restart...
Again and again only this message ...
I try to go boot manager by pressing f2 ,f12,f8 it it doesn't work, only pressing delete button it shows some options. It try to install a new os but it is not reading my cd/dvd or usb. When it check options it shown a massage that they are disable. Some stuff to enable my usb, dvd port or any way to start my system....
View 2 Replies
View Related
Nov 24, 2012
A new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?
View 2 Replies
View Related
Aug 6, 2011
I started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
View 2 Replies
View Related
Jul 5, 2011
I made the HDD formatted and it's in NTFS format. The disk for some reason says Bootmgr is missing. Also when I try to install Windows 7, it says error code: 0x80070017. I don't have any OS installed. I've tried the repair disk thing. Also my BIOS is PhoenixBIOS (or something, that what it says on the BIOS Setup Utility menu) and I don't know how to disable AHCI mode.
View 1 Replies
View Related
Oct 1, 2011
I am using windows 7 , toshiba A505 notebook, my mouse stopped working (even usb mouse) and I got this error 19 message (Registry is missing or damaged). I installed the driver again from toshiba website, but also I got the same error message.
View 1 Replies
View Related
Jul 2, 2012
when i start the game is show missing dll then error code2
View 3 Replies
View Related
May 5, 2009
I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
View 4 Replies
View Related
Aug 31, 2009
I have a problem thaI am hoping someone has a solution to. I had previously installed Windows 7 RC on my computer. I then installed a SATA RAID PCI card and also installed a second HD. I attempted to install Vista on the second HD, but had problems and uninstalled it. When I try to boot up the boot up screen gives me the option of Windows 7 or setup. If I choose Windows 7, there is no problem. If I do not choose and the boot up continues in the setup mode I get an error message on the blue screen of death.
The computer shuts the start up in order to preserve the computer. It instructs me to remove the PCI card and HD and reinstall them. I have done that. I undertand that the boot up files fromVista are still on the the HD in a hidden folder. How do I correct this situation? Can I re-install Vista on the second HD and achieve the desired result? I formatted the second HD after the blue screen, but should I use a drive scrubber and remove all traces? If you know or believe you have an answer, I hope to hear from you.
View 2 Replies
View Related
Oct 2, 2012
I am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
View 2 Replies
View Related
Nov 5, 2010
Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. how I don't know.My system statrt up, loads the windows 7 files and then comes up with the Windows Boot Manager screen stating that it has problems communicating with a device connected to your computer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred.I have tried my 2 SSD drives in Raid 0 and also a single HDD with the same results.My DVD writer is an IDE model, but I can't think that this is the problem since the first time I used this drive and the same original Windows 7 Ultimate Disc there were no problems.I even went as far and got a PS2 keyboard to avoid any USB devices and also downloaded a full untouched version of Windows 7 with the same error! (Maybe my disc got scrtaches after its first use, I don't know)
View 3 Replies
View Related
Oct 13, 2011
So I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies
View Related
May 3, 2011
I've had my computer for 8 months, it's a dell inspiron 1545 running windows 7 home premium. I'm suddenly unable to start the computer as it just comes up with a blue windows 7 screen with a cursor and that's it. I've tried starting it in normal mode and and startup repair but the same thing happens with both. I ran the diagnostics test and it came up with error code 2000-0142 which after googling i've found is a hard drive problem.
Will reinstalling windows 7 wipe my hard drive?
View 4 Replies
View Related
Feb 2, 2012
I have a desktop computer and before windows boots i am receiving this error code <window root>\system32\ntoskrnl.exe. it is telling me to overcome this problem I must put in the windows cd which i don't have and cannot get my hands on to run the windows recovery console is there a way around this problem please.
View 2 Replies
View Related
Sep 18, 2012
My pc didn't boot, so I used a SATA --> USB docking station to format my hard drive (NTFS). Then I took an old hard drive, and transfered all of it to my new one.
Now I get the BootMGR is missing error when I boot my pc.
View 1 Replies
View Related
May 29, 2012
Recently I have had a load of hardware issues which have caused me to replace my PSU and GPU. After doing so to more powerful units, I went to boot up again and got the error: "BOOTMGR is missing"
I have had this before when I remove my secondary HDD and just try and boot from my primary SSD, but after re-connecting the secondary HDD it would work again (telling me this BOOTMGR is on the HDD, even though the Windows files are on the SSD).
I don't know what to make of this as if I boot from the SSD alone nothing happens and it restarts, and if I connect the HDD and it boots then it goes into the System Recovery and after repairing/restoring still won't work. I think the BIOS settings are correct, with the SATA drives set to AHCI (as I'm 99% sure they were before).
My PC specs are:
Intel i7 980X
Intel DX58SO Motherboard
128GB OCZ Vertex 3 SSD
2TB WD HDD (secondary)
Radeon 7850 2GB GFX
8GB DDR3 RAM
Windows 7 Ultimate
View 1 Replies
View Related