Windows 7 Boot Manager Error 0xc00000e9
Oct 2, 2012
I am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
View 2 Replies
ADVERTISEMENT
Nov 5, 2010
Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. how I don't know.My system statrt up, loads the windows 7 files and then comes up with the Windows Boot Manager screen stating that it has problems communicating with a device connected to your computer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred.I have tried my 2 SSD drives in Raid 0 and also a single HDD with the same results.My DVD writer is an IDE model, but I can't think that this is the problem since the first time I used this drive and the same original Windows 7 Ultimate Disc there were no problems.I even went as far and got a PS2 keyboard to avoid any USB devices and also downloaded a full untouched version of Windows 7 with the same error! (Maybe my disc got scrtaches after its first use, I don't know)
View 3 Replies
View Related
Feb 19, 2010
It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
View 9 Replies
View Related
Dec 23, 2011
I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.
"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�
Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.
View 4 Replies
View Related
Jan 24, 2012
My compture can't run windows: erros-status: 0xc00000e9 Info: An unexpected I/0 error has occurred
and at this time I can't ascce the bios page,I am having a Toshiba satellite C660-1UJ
View 1 Replies
View Related
Jul 16, 2012
I tried to install window 7 to new Extreme SSD couple times but I always got the same message:"Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and restart your computer. If you continue to receive this error message, contact the hardware manufacture.error. 0xc00000e9
View 1 Replies
View Related
May 19, 2012
I get this error using both a HOme premium DVD and using the HDD on this system ... best I can tell it is not giving me options about what sort of boot to attempt. Not sure the hardware is healthy but there are no removable devices present [that is no sd card, no usb thingies plugged halfway in, just the dvd drive which is either empty or with the Windows 7 disc, depending on attempt]
View 2 Replies
View Related
Sep 7, 2012
Well first of all I started up my PC and it immediately jumped into Startup Repair maybe cause I didn't shut it down properly. It went through the repair and several times. By then I knew something was wrong, I checked the Diagnostics and see what Startup Repair had actually done. It turns out it could not fix an error with the OS Loader.It came up with two error code (0x2) and (0x490).I followed the following instructions:
1. bcdedit /export C:BCD_Backup
2. C:
3. cd Boot
4. attrib bcd -s -h -r
5. ren C:BootBCD BCD.old
6. bootrec /RebuildBCD
I also tried using /FixMBR and /FixBoot However none of these worked and my I tried booting up it came up with the same problem. I went back into the Windows 7 DVD and ran Startup Repair again. It said it was completed successfully but it said also if it doesn't boot then there's something wrong.Which leads to my new error screen that never goes away everytime I switch on the PC. The error message is as follows:A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair You Computer," and then choose a recovery tool.Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver sginature enforcement.
File: WindowsSystem32Winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
If I try and press ENTER it will take me to the boot menu and if I press ENTER to select an OS (I only have one) then it will jump back to the previous screen.
View 9 Replies
View Related
Oct 20, 2012
My friend installed Windows 7 (from internet) on my Compaq C700 (which had Windows Vista 32) I don't know if he used windows 7 32 or 64... Now I'm receiving an error message :0xc00000e9 Since I don't have the recovery/repair CD I will buy one but before doing it I want to know if I have to buy the recovery/repair CD for Windows 7 or Vista?
I tried to repair it using F11-F10-F8 but it didn't work.
View 2 Replies
View Related
Jan 4, 2013
i have a dell inspiron Laptop and I'm running (or trying to run) windows 7 home 64 bit
1.)One morning windows would not start all or a sudden (i'm guessing due to an automatic windows update), it would only let me go into the recovery mode.
2.)I tried several of the recovery options to no avail until i finally got one to work.
3.)After that windows was working but was EXTREMELY slow despite my best efforts
4.)I decided to do a complete factory restore using my restore disks (the ones you make when you first get the computer)
5.) this worked perfectly and windows seemed to be running great until I restarted, and on the restart it took me to a black and white screen that gives me the 3 instructions (none of which help). the status on that screen says 0xc000000e9
6.) the only thing i can do is boot to the recovery disk and reformat again, and the same thing then happens: windows works great until i turn off or restart, then I'm back at the black and white screen.
View 1 Replies
View Related
May 5, 2009
I'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
View 4 Replies
View Related
Aug 30, 2012
his past week, my little one dropped my laptop on the floor which gave me error 0xc00000e9. I reinstalled Win 7 and everything seemed to be back to normal. Once I logged on, the computer operated so slow that it lagged when typing. I went to control panel and found out that none of the Microsoft, Intel programs were listed. I then realized updates weren't turned on, so I tried turning it on, but it gave me an error. This was the same error I got with many of the services not willing to turn on. I then went to services and tried turning it on from there, but I got error performing inpage operation. After that, I tried CHKDSK L: /R, but after waiting 5 days, it wouldn't move in stage 4 of 5.
View 2 Replies
View Related
Aug 31, 2009
I have a problem thaI am hoping someone has a solution to. I had previously installed Windows 7 RC on my computer. I then installed a SATA RAID PCI card and also installed a second HD. I attempted to install Vista on the second HD, but had problems and uninstalled it. When I try to boot up the boot up screen gives me the option of Windows 7 or setup. If I choose Windows 7, there is no problem. If I do not choose and the boot up continues in the setup mode I get an error message on the blue screen of death.
The computer shuts the start up in order to preserve the computer. It instructs me to remove the PCI card and HD and reinstall them. I have done that. I undertand that the boot up files fromVista are still on the the HD in a hidden folder. How do I correct this situation? Can I re-install Vista on the second HD and achieve the desired result? I formatted the second HD after the blue screen, but should I use a drive scrubber and remove all traces? If you know or believe you have an answer, I hope to hear from you.
View 2 Replies
View Related
May 28, 2012
I have a Toshiba Satellite C660 and it is failing to start up. A few days ago i was on my laptop and i turned it off, the next day when i turned it on it came up with an option to chose " launch start up repair" or "start windows normally" but when i chose either the same error message appears after 2-3 minuets of waiting.The error message says:"Windows has encountered a problem communicating with a device connected to your computer.This error can be caused by unplugging a removable storage device such as an external USB drive while the devise is in use, or faulty hardware such as a hard drive or CD- ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.If you continue to receive this message, contact the hardware manufacturer.
Status: oxc00000e9
Info: An unexpected I/O error has occurred."?
View 1 Replies
View Related
Jul 16, 2012
Bootmgr is missing and I've tried every way but reinstalling. I want to reinstall but when it says expanding files it stays on 0 for 30 mins then a error message comes up and I can't reinstall.
View 9 Replies
View Related
Nov 28, 2009
such as i wrote in the title i get error 0x80070570 when i try to install Windows 7
this the first time i face this problem because i install Windows 7 many times before on the same computer
the problem start with blue screens when i already have a Windows 7 so such as many people do i backup all my files and format C partition Then when i install Windows 7 i 0x80070570 problem so i format all of my hard disk and again i got this error
i tried alot of Solutions but all of them did not solve the problem
i tried to use system recovery options but it unavailing and it tell me boot Manager is missing or corrupt so i tried many commands like bootsect/nt60 and also no luck
now what can i do to solve this problem , can any one help me please ?
View 9 Replies
View Related
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Mar 11, 2009
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies
View Related
Jan 13, 2013
ihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies
View Related
Mar 12, 2012
I've been having issues with my computer, initially it was loading to the windows screen and would say "starting windows"(where the icon would normally swarm in and present itself). It would stop here with just the words at the bottom. One night it stayed on all night, which I eventually woke up and checked what was going on and it was stuck at a black screen. I tried restarting multiple times and it would go to a completely black screen(no mouse). Eventually I went into BIOS and selected "use fail safe defaults".This seemed to have fixed my problem... until I went to open a program and it took react very slowly with the program constantly "not responding". I decided to restart my computer. Now it will come up with either the black screen, or if I get it to to "launch" it says it is missing hardware item and lists 0xc00000e9 as the error code. Has my hard drive or memory died? I need help before I replace the wrong items entirely... I've tried reloading windows 7 multiple times now and it continues to give the same error.
View 5 Replies
View Related
May 7, 2010
I tried to install WIN 7 to a NEW HD (clean install) since you cannot do a WIN XP upgrade install. I left my old C: drive (WIN XP) hooked up while I installed WIN 7 to the NEW drive. Afterward I decided that my computer is too slow to effectively run WIN 7 so I took the NEW drive out (WIN 7 installation) and intend to put it in a new faster computer.Now when I try to boot up my old C: drive with WIN XP, I get a WIN 7 Boot Manager. What a PAIN in the A--. How do I get rid of the Boot Manager so my WIN XP will boot up normally?
View 1 Replies
View Related
Nov 17, 2012
I have a windows 7 home premium 64 bit. And when i start the system i get the following message.Boot Manager:Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Info: an error occurred while attempting to read the boot configuration dataI searched the forums. But unfortunately i don have the installation disc.Is there any other way to get through this.
View 1 Replies
View Related
Jan 15, 2013
on power up the computer goes to a screen and at the top says Windows Boot Manager. insert windows disc. language, repair, Status: 0xc000000f
info: boot selection failed because a required device is inaccessible. So, I hit enter and it always goes back to same screen. I will not let me F8!!! I will let me F2 and F12. I do not have any disc to reinstall windows.
View 5 Replies
View Related
Mar 7, 2009
I have a system running XP. I partitioned my drive in half and installed Windows 7. I tried to start XP again and messed it up. I think it's trying to use XPs boot manager. Do I need to re-install 7 to use it's boot manager?
Now that I know this .iso works great, I want to put 7 on a partition on my main Vista system. I can't afford to lose everything like I did on the XP system. When I tried to start XP after installing 7 I got an error. "windows root system32 hal.dll is missing or corrupt"
I can't have that happening to my main system. Is this normal? Did I do something wrong? Will it happen to Vista?
View 1 Replies
View Related
Feb 28, 2012
I am unable to install Windows 7 or XP on my new build. I own a Windows 7 Professional 64-Bit Disc and the XP Disc is from my old PC. After choosing to boot from my optical drive, I receive a Windows Boot Manager scree that tells me that Windows has encountered a problem communicating with a device connected to your computer.
Status: 0xc00000e9
I have tried the following:
- Rebooting my PC and only having my SSD connected to my MB (no beeps)
- Rebooting my PC and only having my HDD connected to my MB (no beeps)
- Trying both of my HDDs connected to my MB (no beeps)
- Having both of my HDDs disconnected. (no beeps)
- Trying to install Windows XP, but I received a similar error (no beeps)
- Changed the SATA mode in my BIOS from ACHI to IDE - (my pc then made loud, rapid, and continuous beeps)
Do I have to send my drives back for an RMA or is my MB bad? Everything is powering on, but I do not know what the problem is. Could it be my SATA 6GB/s cables?
Build:
- Motherboard: ASUS P8 Z68-V/Gen 3
- Processor: Intel i5 2500k
- Memory: G.Skill 4GB x 2 DDR3 PC12800
- Graphics Card: Nvidia GTX 560ti
- PSU: Corsair HX850
- Optical Drive: Samsung 12X S-ATA Blu Ray Drive
- SSD: Crucial M4 128 GB → SATA III → SATA 6GB/s
- HDD: WD Caviar Blue 500 GB → 16MB cache → 7200 RPM → SATA 6GB/s
View 9 Replies
View Related
May 13, 2010
when we compress the disk space entirely by going to my computer --> right click on the c: drive icon ---> properties ---> compress disk drive, the compression utility in win 7 accidently may compress the boot manager files that include the file bootsect.bak and the boot folder also . when the computer is restarted the machine hangs up and says "boot manager is compressed " and shuts down .at the prompt type notepad (since the recovery option boots from a seperate wim image it has notepad built into it ) press ctrl + o which invokes the open file dialog go to the open file field (ALT+N) and type c:oot and also see for the c:ootmgr file. right click it and deselect the option of "compress files to save disk space" when we apply the boot manager is again decompressed. also if someone finds this harder we can directly deselect the compression option by reversing the process used to compress the drive thats it . we are done
View 1 Replies
View Related
Jan 21, 2012
I used to have both XP & 7 & removed XP. I used to have to select from a black & white screen called Windows Boot Manager. Now it shows only 7 and I have to select it. How do I get rid of this screen?
View 1 Replies
View Related
Nov 14, 2012
I'm having an issue where my Windows boot manager is missing. However when trying to repair, there isn't even a win7 installation file on any of my HDDs. However if I search for a driver that may be located in a file, I can view all of my files on my C drive.
View 2 Replies
View Related
Aug 16, 2012
When I start my computer I receive a message that says "Windows Boot Manager: The boot selection failed because a required device is inaccessible.: When I try to use the Windows 7 Recovery Disk to repair the computer I get a blue screen of death. I have a reburbished Dell GX620 that currently runs Windows 7 that I believe orginally had Windows XP.
View 4 Replies
View Related
May 12, 2011
Everytime I start up i get this annoying screen:
1. How do I removed this from my startup
I have set my msconfig right:
and i also did disable here:
What the **** is wrong!
View 9 Replies
View Related
Jan 19, 2012
I am told that the Windows 7 OS uses a bootmgr to boot up windows. Can anyone explain this process in a way that I can understand.
View 2 Replies
View Related
