Error 0xc00000e9 ; Computer Won't Start

Jan 4, 2013

i have a dell inspiron Laptop and I'm running (or trying to run) windows 7 home 64 bit

1.)One morning windows would not start all or a sudden (i'm guessing due to an automatic windows update), it would only let me go into the recovery mode.

2.)I tried several of the recovery options to no avail until i finally got one to work.

3.)After that windows was working but was EXTREMELY slow despite my best efforts

4.)I decided to do a complete factory restore using my restore disks (the ones you make when you first get the computer)

5.) this worked perfectly and windows seemed to be running great until I restarted, and on the restart it took me to a black and white screen that gives me the 3 instructions (none of which help). the status on that screen says 0xc000000e9

6.) the only thing i can do is boot to the recovery disk and reformat again, and the same thing then happens: windows works great until i turn off or restart, then I'm back at the black and white screen.

View 1 Replies


ADVERTISEMENT

Dell Inspiron 14r: Error 0xc00000e9: Unexpected I/O Error

May 19, 2012

I get this error using both a HOme premium DVD and using the HDD on this system ... best I can tell it is not giving me options about what sort of boot to attempt. Not sure the hardware is healthy but there are no removable devices present [that is no sd card, no usb thingies plugged halfway in, just the dvd drive which is either empty or with the Windows 7 disc, depending on attempt]

View 2 Replies View Related

Windows 7 Boot Mgr Error 0xc00000e9: Unexpected I/O Error?

Feb 19, 2010

It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?

View 9 Replies View Related

Error 0xc00000e9 - Recovery/repair CD

Oct 20, 2012

My friend installed Windows 7 (from internet) on my Compaq C700 (which had Windows Vista 32) I don't know if he used windows 7 32 or 64... Now I'm receiving an error message :0xc00000e9 Since I don't have the recovery/repair CD I will buy one but before doing it I want to know if I have to buy the recovery/repair CD for Windows 7 or Vista?

I tried to repair it using F11-F10-F8 but it didn't work.

View 2 Replies View Related

Repair Windows 7 Error 0xc00000e9

Jan 24, 2012

My compture can't run windows: erros-status: 0xc00000e9 Info: An unexpected I/0 error has occurred
and at this time I can't ascce the bios page,I am having a Toshiba satellite C660-1UJ

View 1 Replies View Related

Windows Encountered An Error 0xc00000e9

Jul 16, 2012

I tried to install window 7 to new Extreme SSD couple times but I always got the same message:"Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and restart your computer. If you continue to receive this error message, contact the hardware manufacture.error. 0xc00000e9

View 1 Replies View Related

Windows 7 Boot Manager Error 0xc00000e9

Oct 2, 2012

I am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.

Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".

Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.

View 2 Replies View Related

Error 0xc00000e9 Performing Inpage Operation?

Aug 30, 2012

his past week, my little one dropped my laptop on the floor which gave me error 0xc00000e9. I reinstalled Win 7 and everything seemed to be back to normal. Once I logged on, the computer operated so slow that it lagged when typing. I went to control panel and found out that none of the Microsoft, Intel programs were listed. I then realized updates weren't turned on, so I tried turning it on, but it gave me an error. This was the same error I got with many of the services not willing to turn on. I then went to services and tried turning it on from there, but I got error performing inpage operation. After that, I tried CHKDSK L: /R, but after waiting 5 days, it wouldn't move in stage 4 of 5.

View 2 Replies View Related

Windows Boot Manager Install Error 0xc00000e9

Nov 5, 2010

Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. how I don't know.My system statrt up, loads the windows 7 files and then comes up with the Windows Boot Manager screen stating that it has problems communicating with a device connected to your computer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred.I have tried my 2 SSD drives in Raid 0 and also a single HDD with the same results.My DVD writer is an IDE model, but I can't think that this is the problem since the first time I used this drive and the same original Windows 7 Ultimate Disc there were no problems.I even went as far and got a PS2 keyboard to avoid any USB devices and also downloaded a full untouched version of Windows 7 with the same error! (Maybe my disc got scrtaches after its first use, I don't know)

View 3 Replies View Related

Diagnosing Computer: 0xc00000e9 Windows 7-64bit

Mar 12, 2012

I've been having issues with my computer, initially it was loading to the windows screen and would say "starting windows"(where the icon would normally swarm in and present itself). It would stop here with just the words at the bottom. One night it stayed on all night, which I eventually woke up and checked what was going on and it was stuck at a black screen. I tried restarting multiple times and it would go to a completely black screen(no mouse). Eventually I went into BIOS and selected "use fail safe defaults".This seemed to have fixed my problem... until I went to open a program and it took react very slowly with the program constantly "not responding". I decided to restart my computer. Now it will come up with either the black screen, or if I get it to to "launch" it says it is missing hardware item and lists 0xc00000e9 as the error code. Has my hard drive or memory died? I need help before I replace the wrong items entirely... I've tried reloading windows 7 multiple times now and it continues to give the same error.

View 5 Replies View Related

Unexpected I/o Error, Error 0xc00000e9, How Can I Fix It

May 28, 2012

I have a Toshiba Satellite C660 and it is failing to start up. A few days ago i was on my laptop and i turned it off, the next day when i turned it on it came up with an option to chose " launch start up repair" or "start windows normally" but when i chose either the same error message appears after 2-3 minuets of waiting.The error message says:"Windows has encountered a problem communicating with a device connected to your computer.This error can be caused by unplugging a removable storage device such as an external USB drive while the devise is in use, or faulty hardware such as a hard drive or CD- ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.If you continue to receive this message, contact the hardware manufacturer.

Status: oxc00000e9
Info: An unexpected I/O error has occurred."?

View 1 Replies View Related

File:\boot\BCD Status: 0xc00000e9 Unexpected I/O Error Has Occurred

Dec 23, 2011

I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.

"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�

Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.

View 4 Replies View Related

0x80070002 Error Can't Start Computer

Jun 6, 2011

I recently have had major issues with my HP pavilion dv6 laptop. I bought it about a year ago, and it has worked reasonably well until now. I downloaded some iso files, and I wanted to run them, because they were an old game that I really liked of my friends, but he sold it. I tried to copy it onto a disk, but the disk was playing up, so I downloaded DAEMON tools lite so that I could install it. I then had to restart the computer, as you have to with new software, and It seemed fine. I then turned on the computer the next day, and the CHKDSK program ran. I didn't worry about this too much, it happens occasionally.but when the computer started up properly; it wouldn't run any programs. when I tried to get things to go, it would always come up with a balloon in the corner saying that the file system structure is corrupt or unusable, please run CHKDSK on file system C:. So I did. The next day(today), everything worked fine. I could do just about everything. I told CHKDSK and the memory diagnostics tool to run while I was at school. I didn't notice anything bad at the time. Everything worked when I got home from school; except that most of my gadgets had no writing on them, which concerned me a little, and some of my startup programs didn't start.

View 4 Replies View Related

Computer Can't Start Mpfilter,sys Error

Jan 5, 2013

So when ever I try turn on my computer it fails to do so and has a \windows\system32\drivers\mpfilter.sys error.I'm Running off Windows 7 Gigabyte ATI motherboard,I've Tryed Booting in to Safe mode doing a system Resystem restore to previous working point and everytime I do it goes strait to saying \windows\system32\drivers\mpfilter.sys error...

View 1 Replies View Related

Unable To Start Computer Without Receiving Error

Dec 19, 2011

I have an Asus laptop with Windows 7 Home Premium. Last night it started having a problem where it cannot boot and gives the following error on a blue screen:"STOP: c0000135 The program can't start because %hs is missing from your computer. Try reinstalling the program to fix this problem."I've found some threads linking this error to AVG, so I've already followed these directions:url...However, I'm still unable to start the computer without receiving this error.The computer has also attempted to run "Startup Repair" but it just says it "cannot repair this computer automatically."

View 4 Replies View Related

Keep Getting Runtime Error 2 At 00004ad4 When Start Computer?

Mar 25, 2012

i keep getting runtime error 2 at 00004ad4 when i start my computer.

View 6 Replies View Related

No Bootable Device Error, Can't Start Computer

May 29, 2012

My Toshiba Satellite L755 is receiving the following error at startup:

Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key

This occurred after I used Toshiba Wizard to clear the hardrive. I was attempting to get everything back it's original state.

So far I have gotten into setup by holding f2 at startup. The boot tab reads:

1. HDD/SSD Hitachi HTS545050B9A300 (S1)
2. USB
3. ODD TSSTcorp CDDVDW TS-L633F (PM)
4. FDD
5. LAN Atheros Boot Agent

I have also tried disconnecting the battery and harddrive and then reconnecting them.

View 9 Replies View Related

No Bootable Device Error, Can't Start Computer?

Nov 7, 2012

NO BOOTABLE DEVICE--INBSERT BOOT DISK AND PRESS ANY KEY FOR REALTEK RTL8102EPCI-E ETHERNET CONTROLLER v1.07 (080320) media test failure, check cable

View 2 Replies View Related

Windows Cannot Start The WLAN Auto-config Service On Local Computer, Error 1068

Aug 12, 2012

I am unable to connect to the Internet on wireless home network.I have carried out the following:'Click Start, type services.msc, then press Enter. Scroll down to "WLAN AutoConfig" and right click on it and select Properties. Set it to Automatic and not Disabled, and press the Start button, then click OK.That should start the service.'I received the following message:"Windows could not start Wired AutoConfig Service on local computer.Error 1068: The dependency service or group failed to start."

View 1 Replies View Related

Computer Doesn't Start Can't Get Into Bios Or Advanced Start Up Setting

Sep 17, 2012

When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.

View 9 Replies View Related

Toshiba Not Booting Up - Status 0xc00000e9

Nov 19, 2012

Toshiba laptop showing a status 0xc00000e9. How do I bypass it?

View 2 Replies View Related

Unable To Install Windows 7 On New Build - Status 0xc00000e9

Feb 28, 2012

I am unable to install Windows 7 or XP on my new build. I own a Windows 7 Professional 64-Bit Disc and the XP Disc is from my old PC. After choosing to boot from my optical drive, I receive a Windows Boot Manager scree that tells me that Windows has encountered a problem communicating with a device connected to your computer.

Status: 0xc00000e9

I have tried the following:
- Rebooting my PC and only having my SSD connected to my MB (no beeps)
- Rebooting my PC and only having my HDD connected to my MB (no beeps)
- Trying both of my HDDs connected to my MB (no beeps)
- Having both of my HDDs disconnected. (no beeps)
- Trying to install Windows XP, but I received a similar error (no beeps)
- Changed the SATA mode in my BIOS from ACHI to IDE - (my pc then made loud, rapid, and continuous beeps)

Do I have to send my drives back for an RMA or is my MB bad? Everything is powering on, but I do not know what the problem is. Could it be my SATA 6GB/s cables?

Build:
- Motherboard: ASUS P8 Z68-V/Gen 3
- Processor: Intel i5 2500k
- Memory: G.Skill 4GB x 2 DDR3 PC12800
- Graphics Card: Nvidia GTX 560ti
- PSU: Corsair HX850
- Optical Drive: Samsung 12X S-ATA Blu Ray Drive
- SSD: Crucial M4 128 GB → SATA III → SATA 6GB/s
- HDD: WD Caviar Blue 500 GB → 16MB cache → 7200 RPM → SATA 6GB/s

View 9 Replies View Related

Status 0xc00000e9 - Windows Failed To Load Because Kernel Missing Or Corrupt

Oct 29, 2011

I turned on my pc, and it would not let me get past start up, saying
file : Windowssystem32
tkrnlpa.exe
status : 0xc00000e9 Info:
Windows failed to load because the kernel is missing or corrupt

I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]

View 4 Replies View Related

Get A F3-F200-002 Error Said An Error Has Occurred Press OK To Turn Off The Computer

Mar 7, 2012

i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.

View 1 Replies View Related

How To Get Rid Of Start Up Error

Feb 10, 2013

Every time I start my computer the following is displayed 'Sonic Activation Module' which refers to a CD-ROM or other removable disk. How do I get rid of this

View 1 Replies View Related

Error At Start Up

Nov 20, 2009

everytime my pc boots up i get a message pop saying

windows cant open this file

sys16.dll.vzr

done a google search on it but cant find anything

View 9 Replies View Related

Getting Error When Try To Start Cd Rom

Nov 16, 2012

I get an error code 19 and the system cannot start the cdrom drive. Says the registry is corrupted. How can I get my cdrom drive working again

View 3 Replies View Related

Click Start And Sleep Computer / Monitor Will Go To Sleep But Computer Is Still Running

May 20, 2012

Sometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.

View 1 Replies View Related

Error Messages On Start Up

Jan 12, 2012

I am getting error messages on start up first one is C:windowssystem32igfxtray.exe and the second one is C:windowssystem32igfxpers.ex

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 595958 MB, Free - 546612 MB; D: Total - 14216 MB, Free - 1587 MB;
Motherboard: Hewlett-Packard, 166A
Antivirus: win 7 anti spyware

View 3 Replies View Related

Error Message At Start Up?

Jan 13, 2013

I keep getting the "Can't open ACPI Kernel Mode Drive" when I turn on my computer. After I click "OK" everything seemed to work fine until a few days ago. Now my screen goes black periodically for no apparent reason. I'm wondering if this has anything to do with the error message at start up.

View 2 Replies View Related

Start Up Error Winczp32.rom

Aug 12, 2010

Recently I am getting an error on start up, it says - There was a problem starting winczp32.rom. The specific module could not be found. Anyone knows how could I disable or fix that problem?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved