I tried to install window 7 to new Extreme SSD couple times but I always got the same message:"Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and restart your computer. If you continue to receive this error message, contact the hardware manufacture.error. 0xc00000e9
It's running Windows 7 Pro x64. When I attempt to start it up, it starts up the Windows Error Recovery program, suggesting that I launch Startup Repair, and allowing me to start Windows normally. In both scenarios, I get the same error.When I start normally, I get the Starting Windows text, then I get a solid white bar with Windows is loading files... above it. It fills up halfway, then I get Windows Boot Manager error 0xc00000e9: An unexpected I/o Error has occurred.This computer is a stock Dell Inspiron 530s, with no new hardware devices added or removed in recent memory (other than starting from a USB stick once or twice, but not since I installed Windows 7 Pro x64 on here).How should I proceed?hould I plug in a USB stick I have Xubuntu 9.04 on and backup all his files before I do anything?
My compture can't run windows: erros-status: 0xc00000e9 Info: An unexpected I/0 error has occurred and at this time I can't ascce the bios page,I am having a Toshiba satellite C660-1UJ
I am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
Just wanted to reinstall my Windows 7 this morning due to the fact that my dvd writer did not read of write CDs. After some research I learnt that a re-install will do the trick. how I don't know.My system statrt up, loads the windows 7 files and then comes up with the Windows Boot Manager screen stating that it has problems communicating with a device connected to your computer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred.I have tried my 2 SSD drives in Raid 0 and also a single HDD with the same results.My DVD writer is an IDE model, but I can't think that this is the problem since the first time I used this drive and the same original Windows 7 Ultimate Disc there were no problems.I even went as far and got a PS2 keyboard to avoid any USB devices and also downloaded a full untouched version of Windows 7 with the same error! (Maybe my disc got scrtaches after its first use, I don't know)
I get this error using both a HOme premium DVD and using the HDD on this system ... best I can tell it is not giving me options about what sort of boot to attempt. Not sure the hardware is healthy but there are no removable devices present [that is no sd card, no usb thingies plugged halfway in, just the dvd drive which is either empty or with the Windows 7 disc, depending on attempt]
I attempted to start up yesterday and got "Unexpected I/O error has occurred. Status 0xc00000e9" and some message about "Windows has encountered a problem communicating with a device connected to your computer" even though I had no USB devices connected at the time. Startup repair spins indefinitely.
I installed another hard drive in hopes that I could run some diagnostics. I can get to a driver-less version of Windows on the extra hard drive and I can see the data on my inaccessible drive - so I know it's there. I just can't boot it.
I've been trying to use my Windows live Gallery for a few days now. I love the feature and of course as soon as I default to it I get an error the full error message is Windows live photo gallery encountered an error and can't start Error code: 0x80070057
So yesterday, I inserted an old disk I found that apparently had some of my old memories on, I put that in my disk drive, my PC lagged out, I could still move my mouse etc., then Blue Screen of Death, so then my PC restarted, fair enough; it then gave me this weird error, something like no OS or something. I did all the checks, unplugging any USB's etc, checking BIOS for AHCI is on and not IDE, still no workies. So then I grabbed a Win7 Installation Disc, when I went to custom install, this came up on the side.
"*Yellow Exclamation Mark Triangle* Windows cannot be installed to this disk. (Show details)."
I press show details, then this dialogue box came up.
"*Yellow Exclamation Mark Triangle* Windows cannot be installed to this disk. The computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
So I went to my BIOS, did the same checks again, ran the installer again and then same thing happened. When I say checks I went to change it to IDE, same error again. So fair enough, I reset my BIOS to default, same error again. I searched online, and I burnt a program called DBAM, which nukes your harddrive, I ran that and it seemed to have cleared my drive, I think! I tried it again, same error. I then downloaded and burnt PartitionMagic or something like that, I couldn't run anything with it as it said "BadDisk" or something like that.
As a last resort, I tried to install Ubuntu, same issues illustrated above. After, I used DiskPart in the CMD, I couldn't make a partition as it gave me a I/O Error "diskpart has encountered an error the request could not be performed because of an i/o device error". I tried to use the Win7 install again, still no damn luck, therefore I tried to use the new partition maker thing in the installation disk, another error came up.
My friend installed Windows 7 (from internet) on my Compaq C700 (which had Windows Vista 32) I don't know if he used windows 7 32 or 64... Now I'm receiving an error message :0xc00000e9 Since I don't have the recovery/repair CD I will buy one but before doing it I want to know if I have to buy the recovery/repair CD for Windows 7 or Vista?
I tried to repair it using F11-F10-F8 but it didn't work.
i have a dell inspiron Laptop and I'm running (or trying to run) windows 7 home 64 bit
1.)One morning windows would not start all or a sudden (i'm guessing due to an automatic windows update), it would only let me go into the recovery mode.
2.)I tried several of the recovery options to no avail until i finally got one to work.
3.)After that windows was working but was EXTREMELY slow despite my best efforts
4.)I decided to do a complete factory restore using my restore disks (the ones you make when you first get the computer)
5.) this worked perfectly and windows seemed to be running great until I restarted, and on the restart it took me to a black and white screen that gives me the 3 instructions (none of which help). the status on that screen says 0xc000000e9
6.) the only thing i can do is boot to the recovery disk and reformat again, and the same thing then happens: windows works great until i turn off or restart, then I'm back at the black and white screen.
his past week, my little one dropped my laptop on the floor which gave me error 0xc00000e9. I reinstalled Win 7 and everything seemed to be back to normal. Once I logged on, the computer operated so slow that it lagged when typing. I went to control panel and found out that none of the Microsoft, Intel programs were listed. I then realized updates weren't turned on, so I tried turning it on, but it gave me an error. This was the same error I got with many of the services not willing to turn on. I then went to services and tried turning it on from there, but I got error performing inpage operation. After that, I tried CHKDSK L: /R, but after waiting 5 days, it wouldn't move in stage 4 of 5.
I am currently using a piece of software that has file ext of .PES This is software for my sewing machine.
I have encountered error OX80004005 - this appears to have corrupted the use of my software - not entirely as I can use a work around.
However when I try to download designs all the files come up as read only and the software requests that I call the download something else before I can use it.
I have a Windows 7 Home premium x64 OS and it has been giving me more and more problems. I've ran virus scan on AVG and Windows security and came up with nothing. I've tried msconfig and disabling all non-windows services from starting and still nothing has worked! Windows Live ID Sign in use to start after I had to manually start it (even though it was set for automatic), and now it won't even start at all, giving me the error it didn't respond in a timely fashion. My windows task manager doesn't respond, and my system restore gives me an error saying "A volume shadow copy service component encountered an unexpected error".
The problem seemed to start when my web browser would start to not load pages. Then my printer wouldn't work because the "printer spool" service wouldn't start, then of course the hardware and devices in the control panel wouldn't load. After resolving that by manually starting the bluetooth service, the Task Manager stopped working, and the "printer spool" service failed and would not stay started. My start up speed has seemed to have hit a brick wall as well, I've ran start-up repair to no avail. This is my build as copied from newegg.com:
ASUS P6X58-E PRO LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA SuperClocked 01G-P3-1461-KR GeForce GTX 560 CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31 Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1066 Microsoft Windows 7 Home Premium SP1 64-bit Western Digital Caviar Green WD10EARX 1TB IntelliPower 64MB Cache SATA 6.0Gb
This computer was quick as can be when I built it, and had had no problem with it whatsoever until now. I can't think of any program that may be messing with it, I've gone through my installed programs and startup programs and nothing to me is out of the ordinary.
I have a Toshiba Satellite C660 and it is failing to start up. A few days ago i was on my laptop and i turned it off, the next day when i turned it on it came up with an option to chose " launch start up repair" or "start windows normally" but when i chose either the same error message appears after 2-3 minuets of waiting.The error message says:"Windows has encountered a problem communicating with a device connected to your computer.This error can be caused by unplugging a removable storage device such as an external USB drive while the devise is in use, or faulty hardware such as a hard drive or CD- ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.If you continue to receive this message, contact the hardware manufacturer.
Status: oxc00000e9 Info: An unexpected I/O error has occurred."?
I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.
"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�
Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.
I have just installed Win 7 RC onto my Fujitsu Lifebook and am receiving the above error repeatedly when trying to use Internet Explorer (also get similar error for Windows Explorer). When the error appears it lists the "process name" (iexplore.exe or explorer.exe), "Module name" (eg mshtml.dll - this varies) and "assert offset" (eg 004DEB6E - also varies) along with 3 buttons "Ignore Once", "Ignore Always" and "Do not ignore".
If I select "do not ignore" the windows error reporting process kicks in but does not find a solution and will ocassionally restart IE or kick me out completely. Selecting "Ignore Once" will often lead to a number of similar popups with either different module or assert offsets.
I have gone through device manager to ensure all my drivers are properly updated and have also tried to reinstall to no avail.
Not sure if it is connected but Windows Update does not appear to find any updates either even if I try and install Office 2007 and look for updates to that (I know it should find SP2 at least).
I recently bought an infrared webcam [generic] from China. Cheap and easy. Turns out that it "encountered an error" when I installed the driver. Before I bought it, I didn't know that it was for 32-bit Windows (they failed to inform me). Is there a way to emulate a 32-bit application on a 64-bit system??? Or a way I can fool the driver to make it work? Or even tamper with it to do so? And, if that won't work; does that mean that the device only works on 32-bit system and would never operate on a 64-bit one? I tried the webcam and driver on a 32-bit laptop and it worked fine. So they device isn't faulty.
I'm writing this for a friend because he now cannot get into his Win7 computer after defragmenting his hard drive. The computer acts like it going to start up, but then an error comes up say "computer restarted unexpectedly or encountered an unexpected error".He has a back up disc, but still gets the same error when trying to use that. He cannot even go into repair mode when pressing f8.He does not have the original disc because it was preinstalled on his computer.
I opened up my PC today and went to install windows 7. It told me it was ''installing devices'', this lasted for about 15 minutes so I restarted my pc. Windows is now giving me an error ''the computer restarted unexpectedly or encountered an unexpected error.Windows installation cannot proceed. To install windows, click OK to restart the computer, and then restart the installation''.But when I restart my PC and click run windows normally, it just gives me the same error.
Last night after all the troubles with getting W7 Pro 64bit installed, I finally managed to do it using a USB.
This morning I start installing all my programs and I noticed that my "Windows Experience" number was 1.0. I assumed this was down to it not recognising my graphics card (Geforce 9600M GS).
I downloaded the drivers from Nvidia and installed them. Upon restarting, I received an unexpected error message giving me the option to repair the problem or run windows normally. The latter just caused the machine to restart everytime it was chosen, and the former took the system restore window.
Upon doing this it managed to get me back to the desktop and everything seemed fine. I tried installing the drivers again and it led to the same problem.
By this point I decided to try and reinstall windows from my USB stick. I performed the first section of this, it started on its own as its supposed to, and began trying to complete the installation. At the point where it said "Setup is starting services", a warning appeared saying:
"The computer restarted unexpectedly or encountered and unexpected error. Installation cannto proceed. To install Windows click OK to restart the computer and the installation."
Sure enough, clicking OK leads me to exactly the same message.
After getting sick of this I tried installing W7 for a third time and exactly the same thing happened. Now I am stuck with the choice of 3 Windows 7's on boot, all three leading to the same error.
I am completely lost, can anyone help?
Specs - 1 year old Samsung R560 Core 2 Duo 2GHz 250GB Formerly running 32bit Vista 64bit W7 Pro
My neighbor has just brought around his desktop saying he tried to load Win 7 over a Vista installation, now he says he cannot install Win 7 and Vista appears to have gone. When I fire it up, I get a screen saying "starting Windows", this then goes to a window saying "Setup Starting Services" which then comes up with the message: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click OK to restart the computer and then restart the installation"What has happened is: he has tried to install an upgrade version of win 7 that is meant to upgrade from the starter edition of Win 7 which he did not have installed and in doing so Vista has been wiped, but before I tell him this I am looking for a confirmation of my diagnosis, does this theory sound plausible? bye the way he does not have a Vista installation disk either!
my laptop wouldn't start up and came up with an error. I went back to windows when it was first purchased so I wouldn't lose my files too. Now when I start up it says "Setup is starting services" and after about 5 seconds it comes up with the error:"The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation."The problem is whenever I click "OK" and it restarts it just comes back with the same error. It used to be a different error, Windows could not complete the installation for some reason that I cant remember. That also put me in this boot loop.I just want to find out how to fix this so I can go back to all my files that are very important. I cannot lose these files or my life will be over!
Specs: Acer Aspire 5742G Windows 7 home premium 64bit. 8192mb memory 128mb video memory Intel core i3 M380 @ 2.53GHz
I was installing Win 7 Ultimate 32 bit onto my PC, and it went great at first, but when it came to "starting services", it popped up a box and said "the computer restared unexpectedly or encountered an unexpected error..." so I pressed "OK" then, the computer restarted and resumed to "starting services" and wants me to click ok for restarting...i can do nothing, cuz when the PC starts it shows only the DELL thing and straight into the installation....
I was using the drivers from AOC on my e234Fk LED monitor when i first purchased it 6 months ago, not sure what happened but windows 7 now is using the generic pnp monitor drivers from Microsoft dated 6/15/2006 and will not let me update to the latest drivers from AOC, i get "window encountered an error while installation".
I've been having issues with my computer, initially it was loading to the windows screen and would say "starting windows"(where the icon would normally swarm in and present itself). It would stop here with just the words at the bottom. One night it stayed on all night, which I eventually woke up and checked what was going on and it was stuck at a black screen. I tried restarting multiple times and it would go to a completely black screen(no mouse). Eventually I went into BIOS and selected "use fail safe defaults".This seemed to have fixed my problem... until I went to open a program and it took react very slowly with the program constantly "not responding". I decided to restart my computer. Now it will come up with either the black screen, or if I get it to to "launch" it says it is missing hardware item and lists 0xc00000e9 as the error code. Has my hard drive or memory died? I need help before I replace the wrong items entirely... I've tried reloading windows 7 multiple times now and it continues to give the same error.
I am unable to install Windows 7 or XP on my new build. I own a Windows 7 Professional 64-Bit Disc and the XP Disc is from my old PC. After choosing to boot from my optical drive, I receive a Windows Boot Manager scree that tells me that Windows has encountered a problem communicating with a device connected to your computer.
Status: 0xc00000e9
I have tried the following: - Rebooting my PC and only having my SSD connected to my MB (no beeps) - Rebooting my PC and only having my HDD connected to my MB (no beeps) - Trying both of my HDDs connected to my MB (no beeps) - Having both of my HDDs disconnected. (no beeps) - Trying to install Windows XP, but I received a similar error (no beeps) - Changed the SATA mode in my BIOS from ACHI to IDE - (my pc then made loud, rapid, and continuous beeps)
Do I have to send my drives back for an RMA or is my MB bad? Everything is powering on, but I do not know what the problem is. Could it be my SATA 6GB/s cables?
Build: - Motherboard: ASUS P8 Z68-V/Gen 3 - Processor: Intel i5 2500k - Memory: G.Skill 4GB x 2 DDR3 PC12800 - Graphics Card: Nvidia GTX 560ti - PSU: Corsair HX850 - Optical Drive: Samsung 12X S-ATA Blu Ray Drive - SSD: Crucial M4 128 GB → SATA III → SATA 6GB/s - HDD: WD Caviar Blue 500 GB → 16MB cache → 7200 RPM → SATA 6GB/s
I turned on my pc, and it would not let me get past start up, saying file : Windowssystem32 tkrnlpa.exe status : 0xc00000e9 Info: Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
