So when ever I try turn on my computer it fails to do so and has a \windows\system32\drivers\mpfilter.sys error.I'm Running off Windows 7 Gigabyte ATI motherboard,I've Tryed Booting in to Safe mode doing a system Resystem restore to previous working point and everytime I do it goes strait to saying \windows\system32\drivers\mpfilter.sys error...
View 1 RepliesI recently have had major issues with my HP pavilion dv6 laptop. I bought it about a year ago, and it has worked reasonably well until now. I downloaded some iso files, and I wanted to run them, because they were an old game that I really liked of my friends, but he sold it. I tried to copy it onto a disk, but the disk was playing up, so I downloaded DAEMON tools lite so that I could install it. I then had to restart the computer, as you have to with new software, and It seemed fine. I then turned on the computer the next day, and the CHKDSK program ran. I didn't worry about this too much, it happens occasionally.but when the computer started up properly; it wouldn't run any programs. when I tried to get things to go, it would always come up with a balloon in the corner saying that the file system structure is corrupt or unusable, please run CHKDSK on file system C:. So I did. The next day(today), everything worked fine. I could do just about everything. I told CHKDSK and the memory diagnostics tool to run while I was at school. I didn't notice anything bad at the time. Everything worked when I got home from school; except that most of my gadgets had no writing on them, which concerned me a little, and some of my startup programs didn't start.
View 4 Replies View Relatedi have a dell inspiron Laptop and I'm running (or trying to run) windows 7 home 64 bit
1.)One morning windows would not start all or a sudden (i'm guessing due to an automatic windows update), it would only let me go into the recovery mode.
2.)I tried several of the recovery options to no avail until i finally got one to work.
3.)After that windows was working but was EXTREMELY slow despite my best efforts
4.)I decided to do a complete factory restore using my restore disks (the ones you make when you first get the computer)
5.) this worked perfectly and windows seemed to be running great until I restarted, and on the restart it took me to a black and white screen that gives me the 3 instructions (none of which help). the status on that screen says 0xc000000e9
6.) the only thing i can do is boot to the recovery disk and reformat again, and the same thing then happens: windows works great until i turn off or restart, then I'm back at the black and white screen.
I have an Asus laptop with Windows 7 Home Premium. Last night it started having a problem where it cannot boot and gives the following error on a blue screen:"STOP: c0000135 The program can't start because %hs is missing from your computer. Try reinstalling the program to fix this problem."I've found some threads linking this error to AVG, so I've already followed these directions:url...However, I'm still unable to start the computer without receiving this error.The computer has also attempted to run "Startup Repair" but it just says it "cannot repair this computer automatically."
View 4 Replies View Relatedi keep getting runtime error 2 at 00004ad4 when i start my computer.
View 6 Replies View RelatedMy Toshiba Satellite L755 is receiving the following error at startup:
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
This occurred after I used Toshiba Wizard to clear the hardrive. I was attempting to get everything back it's original state.
So far I have gotten into setup by holding f2 at startup. The boot tab reads:
1. HDD/SSD Hitachi HTS545050B9A300 (S1)
2. USB
3. ODD TSSTcorp CDDVDW TS-L633F (PM)
4. FDD
5. LAN Atheros Boot Agent
I have also tried disconnecting the battery and harddrive and then reconnecting them.
NO BOOTABLE DEVICE--INBSERT BOOT DISK AND PRESS ANY KEY FOR REALTEK RTL8102EPCI-E ETHERNET CONTROLLER v1.07 (080320) media test failure, check cable
View 2 Replies View RelatedI am unable to connect to the Internet on wireless home network.I have carried out the following:'Click Start, type services.msc, then press Enter. Scroll down to "WLAN AutoConfig" and right click on it and select Properties. Set it to Automatic and not Disabled, and press the Start button, then click OK.That should start the service.'I received the following message:"Windows could not start Wired AutoConfig Service on local computer.Error 1068: The dependency service or group failed to start."
View 1 Replies View RelatedWhen i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
View 1 Replies View RelatedEvery time I start my computer the following is displayed 'Sonic Activation Module' which refers to a CD-ROM or other removable disk. How do I get rid of this
View 1 Replies View Relatedeverytime my pc boots up i get a message pop saying
windows cant open this file
sys16.dll.vzr
done a google search on it but cant find anything
I get an error code 19 and the system cannot start the cdrom drive. Says the registry is corrupted. How can I get my cdrom drive working again
View 3 Replies View RelatedSometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
View 1 Replies View RelatedI am getting error messages on start up first one is C:windowssystem32igfxtray.exe and the second one is C:windowssystem32igfxpers.ex
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 595958 MB, Free - 546612 MB; D: Total - 14216 MB, Free - 1587 MB;
Motherboard: Hewlett-Packard, 166A
Antivirus: win 7 anti spyware
I keep getting the "Can't open ACPI Kernel Mode Drive" when I turn on my computer. After I click "OK" everything seemed to work fine until a few days ago. Now my screen goes black periodically for no apparent reason. I'm wondering if this has anything to do with the error message at start up.
View 2 Replies View RelatedRecently I am getting an error on start up, it says - There was a problem starting winczp32.rom. The specific module could not be found. Anyone knows how could I disable or fix that problem?
View 7 Replies View RelatedI'm having some trouble starting my computer (posting from somewhere else). When I try to start it, it takes a long time then goes to a screen asking me to start the startup repair. When I do, it just seems to be frozen on some of the screens for a very long time and has never moved past it.
View 14 Replies View Relatedi hope i'm placing this in the right section, if not, then could someone tell me where to put it and i'll post it again.i've got a samsung rv510 laptop with windows 7 hp 64 bit.about 2 weeks ago, i was watching a Internet video, had spotify and facebook open too, and my computer suddenly went all bsod on me.i turned it off and on again. it came up with a message like 'a problem has occurred whilst loading up your computer, what would you like to do?' i chose 'launch startup repair', which takes a couple seconds, then i choose the other option of 'start windows normally'. i could get onto safe mode. sometimes it would say 'operating system not found.'the computer will then load normally and i can be on it fine.however, i then started to get norton confidential and shockwave flash crashes in google chrome. i disabled norton confidential and thus didn't get that error anymore. shockwave flash however did still occur as disabling it means i can't watch Internet videos and do some other stuff. sometimes my screen would go blank, and it looks like chrome refreshed itself due to some problem.i then used norton power eraser (i have norton internet security 2011 otherwise, and i did many live updates and scans to see if there was anything there, but nothing) to see if there were any problems. it came up with one file that was a possible threat which was msvcrt.dll so i did as it recommended and deleted it. i restarted the computer and now i can't it won't go past the windows logo without freezing.i had some start-up error in the past (a few months ago) and i was sent two cds to correct the problem and they worked. one cd was labelled 'windows 7 hp 64bit' and the other was 'samsung rv510 driver disc'. i got this laptop, via the disability students allowance, from a company. i haven't contacted the company yet about this problem, but i will be doing so very shortly, because if all else fails, i'm just going to try and get this laptop replaced as i'm not 100% happy with it.i have put in both cds in, the driver one doesn't do anything, but the windows 7 hp 64bit one does. it asks me if i want to continue with the thingy, so i press a button to continue. it tries to fix the start-up, but fails. it says that 'a recent hardware or software change might be the cause'. then tells me to insert the installation disc and do some other things, but i don't have that disc. the company could give that to me.
View 1 Replies View RelatedI have Windows 7 64 bit on my desktop and an OCZ Vertex SSD Boot Drive (C:) my computer has a second hard drive (1tb Samsung Spinpoint F3) for other files. My HDD has two partitions and one of them had Ubuntu on it. I decided to format that partition the other day so I could have access to it (I needed the space). Turns out I formatted the grub launcher from there and now have no way to boot my windows installation. I've tried Startup Repair.
View 2 Replies View RelatedSo last night I came back from going out. My computer was making an annoying noise, really hard to explain almost like a sound when your hard drive is overworking or really old.... My computer isn't even a half year old. I was to tired to try anything so i just hit the turn off buttonI had to go to work early this morning so I just got home. I tried turnning it on this afternoon, it didn't normally. Gave me an option to start normally or safe mode. I tried to start normally. Windows started and then just froze. Keep in mind the Hard drive or w/e is making this noise still while trying to start windows. So since that didn't work I tried to start in safe mode. This didnt' work either and gave me the message about my SATAo drive or something not working properly
View 9 Replies View RelatedMy problem is the system goes through regular BIOS Startup, and shows everything as working, then when it gets to the windows startup screen (where the 4 colored dots turn into the windows symbol), it does one of two things:
1. it just keeps waving there (you know how the colors kind of come out and in etc.)
2. it goes to a black screen, and none of my inputs work (ie. no keyboard mouse, ctrl+alt+del, anything)
The only way to get out of these two situations is to reset directly on the case.
Sometimes it will not go to the startup screen, and will give me the option of "launch startup repair" or "start windows normally". If I choose start windows normally, it goes to one of the top two problems, if i choose startup repair, it begins loading windows files, then the bar stops halfway (and doesnt move for over 8 hours).
The last thing i tried was starting from my windows 7 dvd, and that also begins loading files, then stops halfway.
i downloaded Comodo CIS yesterday (after uninstalling Avira) with no problems, but this morning my Acer One d270 was unable to start giving a black screen, and i clicked enter on the option to use ''Start up repair'', which only seemed to show the following 'Unspecified change to system configuration may have caused the problem error code = ox490' I managed to start in normal mode in the end and everything seem to be working ok as far as speed etc gos. I installed the VMware - Toolwiz Timefreeze, a couple of days ago. Before that i installed Sandboxie, but then uninstalled after it caused BSOD which according to the dump file was caused by the Intel Graphics Accelerator Drivers for Windows 7(R) file - igdkmd32.sys.I noticed that for sometime before the latest downloads that when running windows ''fix problems'', that it says i have too many programs running on start up ,so today i disabled, adobe reader + acrobat, google update , and toolwiz so they are not running on start up. I also have Rapport installed and running but its not showing in msconfig start up list so not sure about it. I'm assuming Word,excel,ccleaner,glary utilities, are not running on start up but dont know how to check!
View 4 Replies View RelatedWith Sandy visit in my area, I've lost power couple of times with the computer being on. It had no issues starting it up, other than Windows complaining about not being shut down gracefully. While I have had power for the last 4-5 days, yesterday the utility power went out with a big boom. I have the generator running and now the computer does not start at all. The LED light is on for the motherboard, indicating that the power is on for the board. Pushing the power on button results in nothing, the system does not start up.
View 2 Replies View RelatedDue to sudden power failure my computer was suddenly shut down.Now it start through open window with safe mode only.How to start my computer with normally?
View 1 Replies View RelatedI turn on my computer it comes to a screen that says start windows normally i select that then it comes up to a screen and at the bottom says loading windows and that is where it stays does noting else
View 1 Replies View RelatedMy hard drive has stopped working. My computer won't even start up. Is there a way for me to fix my harddrive?
View 1 Replies View RelatedI have a emachines with Windows 7 Home Premium 64-bit operating system and when I go to shut down an error comes up saying that svchost.exe0xc0000142 will not start and then my pc wont shut down. Wha does it have and what can I do.
View 2 Replies View RelatedI performed a system update yesterday, and I realized afterwards that I was no longer able to play any videos online or any flash animations. This morning I decided to do a system restore, and upon completion I now find myself unable to load the login screen on my laptop. I get an error window that says:LogonUI.exe - System Error The program can't start because CRYPT32.dll is missing from your computer. Try reinstalling the program to fix this issue.Now, I cannot go anywhere from here. If I click ok or close the window, it comes back up. If I try to access the safe modes, I still get that same error window.
View 14 Replies View RelatedI have built a nice machine on RC1 64 bit Windows 7. Like it lots - but I keep getting two identical errors on start up which I know how to solve in xp or vista but not windows 7.On start up I get two idential pop up windows that say Run Time Error 339 mswinsck.ocx is not registered. Of course it isn't as I don't think it exists in Windows 7. Normally I would use regsvr32 to register it but Windows complains that it isn't compatible. I have tried uninstalling most of my applications (mostly 32 bit stuff like Office 2007) but can't seem to find the one that is causing it. I have looked in the event viewer and can see no mention of the error and also turned on boot logging and looked at the log, again no joy.
View 5 Replies View RelatedSo i have get this error 0xc000000f, which is very common. It's asking me to insert windows 7 cd and do start up repair.But when i insert 7 cd it won't boot. Hence i can't repair.When i insert xp cd into drive, it get boot. But after initial loading it says some files are corrupted.Now i want to ask that, does this problem persist because of any fault in hard disk or motherboard.My pc is under warranty but the man from whom i purchase my pc is out of town and will not come untill february. Father not giving me money to repair. I don't want to shut my pc for whole month
View 2 Replies View Related