CRYPT32.dll Error - Cannot Start Laptop?
Jun 14, 2012
I performed a system update yesterday, and I realized afterwards that I was no longer able to play any videos online or any flash animations. This morning I decided to do a system restore, and upon completion I now find myself unable to load the login screen on my laptop. I get an error window that says:LogonUI.exe - System Error The program can't start because CRYPT32.dll is missing from your computer. Try reinstalling the program to fix this issue.Now, I cannot go anywhere from here. If I click ok or close the window, it comes back up. If I try to access the safe modes, I still get that same error window.
View 14 Replies
ADVERTISEMENT
Dec 4, 2012
I have a lenovo g570 model number 4334. My roommates borrowed it one night and got a virus on it from watching p--n. I did a system restore on it to get rid of it. Now my computer wont go past the starting windows screen and instead goes to a windows box and says," The program can't start because CRYPT32.DLL is missing from your computer. Try reinstalling the program to fix the problem." I borrowed somebody's computer thats exactly the same as mine and created a boot disk to try and fix it but then it stops and says that its missing ootmemtest.exe or something like that.
View 1 Replies
View Related
May 12, 2012
I tried to un-hibernate my laptop this morning (I tend to only hibernate it overnight if I know I'm going to be using it immediately the following morning) and it won't let me log in.
By this I mean that it takes at least 15 minutes of the cursor in the middle of a black screen before it gets to the Login screen. The first time this happened, I was able to Login, but after that, none of the icons loaded up, only the taskbar. After which, a message popped up saying "WinLogin.exe - Bad Login". At which point I manually restarted the computer (as the Start button wasn't working) and chose "Start Windows normally." Now I am at the point that whenever it gets to the Login screen, it immediately restarts, and thus goes into a loop. I stopped this loop by manually restarting again, and selecting safe mode, at which point I got the following error message:
"WerFault.exe Application Error The instruction at 0x000007FEFD6C283C referenced memory at 0x000007FEFD6C283C. The required data was not placed into memory because of an I/O error status of 0xc0000185. Click on OK to terminate the program." This was the only action I could take, so I did so. This immediately followed by an identical error message except with a different code, which began 0x000077....I was unable to see the rest because at that point the computer restarted.
Upon the next restart, I received a Blue Stop error message, which displayed for a few seconds before shutting down again. Key words I managed to see include: "There is an error with the program. The system was shut down to prevent damage to your computer. ...crucial thread issue...."
I literally have no idea what to do. If booting in Safe Mode has no effect, what can be done? I have also tried pressing F8 at the Dell startup screen (where it says to press F2 or F12 etc) but this just froze the machine!
I am running a 64 bit version of Windows 7 on a Dell Studio 1555 laptop.
View 3 Replies
View Related
Jan 6, 2013
Why my laptop take more time too start when i switch it on. Sometime window repair error on screen display.
View 5 Replies
View Related
Dec 8, 2012
F keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies
View Related
Feb 7, 2012
My laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
View 1 Replies
View Related
Jan 30, 2013
Laptop(Dell core i3 vista. Laptop freezes to start?
View 1 Replies
View Related
Feb 16, 2013
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies
View Related
Feb 10, 2013
Every time I start my computer the following is displayed 'Sonic Activation Module' which refers to a CD-ROM or other removable disk. How do I get rid of this
View 1 Replies
View Related
Nov 20, 2009
everytime my pc boots up i get a message pop saying
windows cant open this file
sys16.dll.vzr
done a google search on it but cant find anything
View 9 Replies
View Related
Nov 16, 2012
I get an error code 19 and the system cannot start the cdrom drive. Says the registry is corrupted. How can I get my cdrom drive working again
View 3 Replies
View Related
Jan 12, 2012
I am getting error messages on start up first one is C:windowssystem32igfxtray.exe and the second one is C:windowssystem32igfxpers.ex
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 595958 MB, Free - 546612 MB; D: Total - 14216 MB, Free - 1587 MB;
Motherboard: Hewlett-Packard, 166A
Antivirus: win 7 anti spyware
View 3 Replies
View Related
Jan 13, 2013
I keep getting the "Can't open ACPI Kernel Mode Drive" when I turn on my computer. After I click "OK" everything seemed to work fine until a few days ago. Now my screen goes black periodically for no apparent reason. I'm wondering if this has anything to do with the error message at start up.
View 2 Replies
View Related
Aug 12, 2010
Recently I am getting an error on start up, it says - There was a problem starting winczp32.rom. The specific module could not be found. Anyone knows how could I disable or fix that problem?
View 7 Replies
View Related
Oct 14, 2011
Last night I got on my laptop and it was working fine once it was done doing system and windows 7 updates. It restarted itself after 5 minutes of it being on, then did it again after another 5 minutes. Now, I am just getting the beginning Toshiba Satellite screen, a black blank screen with a blinking cursor then it shuts off. It keeps repeating this process untill you hold the power button to turn it off. I have tried changing the setup back to default settings and did a HDD/SSD recovery and nothing is helping. I need this computer. It's for school and it is essential to my college courses
View 5 Replies
View Related
Oct 25, 2012
This is what my laptop says when I try to start it " STOP: c0000135 The program can`t start because %hs is missing from your computer. Try reinstalling th program to fix this problem."
View 5 Replies
View Related
Aug 15, 2011
my lap top wont start up again
View 1 Replies
View Related
Feb 10, 2012
I have a emachines with Windows 7 Home Premium 64-bit operating system and when I go to shut down an error comes up saying that svchost.exe0xc0000142 will not start and then my pc wont shut down. Wha does it have and what can I do.
View 2 Replies
View Related
Jun 6, 2011
I recently have had major issues with my HP pavilion dv6 laptop. I bought it about a year ago, and it has worked reasonably well until now. I downloaded some iso files, and I wanted to run them, because they were an old game that I really liked of my friends, but he sold it. I tried to copy it onto a disk, but the disk was playing up, so I downloaded DAEMON tools lite so that I could install it. I then had to restart the computer, as you have to with new software, and It seemed fine. I then turned on the computer the next day, and the CHKDSK program ran. I didn't worry about this too much, it happens occasionally.but when the computer started up properly; it wouldn't run any programs. when I tried to get things to go, it would always come up with a balloon in the corner saying that the file system structure is corrupt or unusable, please run CHKDSK on file system C:. So I did. The next day(today), everything worked fine. I could do just about everything. I told CHKDSK and the memory diagnostics tool to run while I was at school. I didn't notice anything bad at the time. Everything worked when I got home from school; except that most of my gadgets had no writing on them, which concerned me a little, and some of my startup programs didn't start.
View 4 Replies
View Related
Jun 11, 2009
I have built a nice machine on RC1 64 bit Windows 7. Like it lots - but I keep getting two identical errors on start up which I know how to solve in xp or vista but not windows 7.On start up I get two idential pop up windows that say Run Time Error 339 mswinsck.ocx is not registered. Of course it isn't as I don't think it exists in Windows 7. Normally I would use regsvr32 to register it but Windows complains that it isn't compatible. I have tried uninstalling most of my applications (mostly 32 bit stuff like Office 2007) but can't seem to find the one that is causing it. I have looked in the event viewer and can see no mention of the error and also turned on boot logging and looked at the log, again no joy.
View 5 Replies
View Related
Jan 5, 2013
So when ever I try turn on my computer it fails to do so and has a \windows\system32\drivers\mpfilter.sys error.I'm Running off Windows 7 Gigabyte ATI motherboard,I've Tryed Booting in to Safe mode doing a system Resystem restore to previous working point and everytime I do it goes strait to saying \windows\system32\drivers\mpfilter.sys error...
View 1 Replies
View Related
Dec 29, 2011
So i have get this error 0xc000000f, which is very common. It's asking me to insert windows 7 cd and do start up repair.But when i insert 7 cd it won't boot. Hence i can't repair.When i insert xp cd into drive, it get boot. But after initial loading it says some files are corrupted.Now i want to ask that, does this problem persist because of any fault in hard disk or motherboard.My pc is under warranty but the man from whom i purchase my pc is out of town and will not come untill february. Father not giving me money to repair. I don't want to shut my pc for whole month
View 2 Replies
View Related
Jan 12, 2012
I recently built a new computer and on occasion when I turn the computer on, I'll get a blue screen saying windows failed to load type thing, and then it restarts and i have to recover. Now the weird thing is it doesn't happen all the time It more often than not doesn't work, but still there will be times where it works all day. I can't figure out why it works sometimes and not others. I don't do anything different, just facebook and Star Wars the Old Republic, so I don't think its a program which is causing the issue. Anyway here are my comp specs and the problem details:
Intel i5 2500 3.30GHz
Gigabyte GTX560OC
C/Master Extreme 700W
WD 1TB Black
Gigabyte GA-Z68AP-D3
LG DWDRW
8GB of RAM
Now the problem
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 6b
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
View 9 Replies
View Related
Jan 4, 2011
I have a 1TB Seagate external drive connected to my computer. When I start the computer I get a Disk Read Error. If I disconnect the external drive, Windows 7 loads properly. Apparently, my system is trying to load Windows from the external drive.
So, how can I get my computer to ignore the external hard drive at start up and load Windows from my C drive (as it always did on my old XP machine)?
View 4 Replies
View Related
Oct 31, 2009
Hey. I got my windows 7 installation cd today. and I put it into my brand new windows vista computer. the installation started, but then it suddently stopped where it said "the computer has to be restarted". After having this message on the installation screen for 15 min I clicked the off button on the computer, and started it again.
Then the nightmare began, when the computer starts, it says: "starting installation" - then the error message - "The installation process cannot be started". if I click ok. the computer restarts and the same happends. if I X it. the computer restarts and the same happens. Im completely stuck with this error and cant either go back to vista or keep installing windows 7.
Tried to hold down F8 when it starts, but nothing happens. For now I just want to go back to vista.
View 6 Replies
View Related
Jan 16, 2013
When I start my computer and desktop comes, there is a notification message, saying "windows could not connect to the group policy client service." So I checked whether group policy client service run using "services.msc", but it shows, it has been stoped and also I can't start the service there. When I checked the event viewer, in the "Windows logs>>System" There is a error message something like this. "There was an error while attempting to read the local hosts file." Event ID 1012.
View 1 Replies
View Related
Jul 19, 2012
I am currently running Windows 7 Ultimate x64 and one morning, my audio stopped working. I discovered audio stopped working because the Windows Audio Service, which relied on the Windows Audio Endpoint Builder service, which relied on the Power service, all stopped working. So to solve my audio problems, I must first start the Power service.However when I try to start it, it gives the following message:Windows could not start the Power service on Local Computer.Error 127: The specified procedure could not be found.
View 3 Replies
View Related
Jan 4, 2013
i have a dell inspiron Laptop and I'm running (or trying to run) windows 7 home 64 bit
1.)One morning windows would not start all or a sudden (i'm guessing due to an automatic windows update), it would only let me go into the recovery mode.
2.)I tried several of the recovery options to no avail until i finally got one to work.
3.)After that windows was working but was EXTREMELY slow despite my best efforts
4.)I decided to do a complete factory restore using my restore disks (the ones you make when you first get the computer)
5.) this worked perfectly and windows seemed to be running great until I restarted, and on the restart it took me to a black and white screen that gives me the 3 instructions (none of which help). the status on that screen says 0xc000000e9
6.) the only thing i can do is boot to the recovery disk and reformat again, and the same thing then happens: windows works great until i turn off or restart, then I'm back at the black and white screen.
View 1 Replies
View Related
Jan 8, 2013
My Asus laptop won't Start up , I have tried system repair , system restore , system image recovery and even windows memory diagnostic but it still won't start up
View 6 Replies
View Related
Jun 15, 2011
I've had my HP laptop for going on two years now and it's been acting up. It's mainly in the hibernation field and it started when i turned the start up GUI off (saved me about 15 seconds in start up) and first installed Ubuntu. I've read elsewhere and it said that my drivers need updated, but Windows update AND HP support assistant said that everything's up-to-date. I want to start from hibernation again. Oh, one more thing the screen is just a white dash (_).
View 1 Replies
View Related
May 1, 2012
My sons Windows 7(64 bit) laptop won't start up properly, I suspect he pulled the battery off while Windows was still open. I hope someone can help, I have tried the following start ups several times.With a normal start up, it gets to the "Starting Windows" page, loads for a while and then restarts.With a Safe Mode start up (all versions), it gets to:Loaded: Windowssystem32DRIVERSAtiPcie.sys, hangs for a while and then restarts.With a Startup Repair (recommended) start up it gets to the login screen - well sort of. The background picture appears with a cursor, but there are nothing else.I have created a system repair disc from my own Windows 7 (64 bit) laptop and have booted from that.This does the same as a Starup Repair, with the addition of choosing a keyboard, it doesn't progress ot offering me an account to log in to.
View 6 Replies
View Related
