I used to have both XP & 7 & removed XP. I used to have to select from a black & white screen called Windows Boot Manager. Now it shows only 7 and I have to select it. How do I get rid of this screen?
View 1 Replies
I have tried at least 5 times installing the OS by using Recovery DVD's that I order from HP. I am able to boot from the DVD's and go through the process of Inserting Disc 1, Disc 2, and Disc 3. Once the setup is complete, I am prompted to Click Continue so that the system can restart the computer and continue the windows 7 Installation. It never even starts the installation. It gives me the following screen:
Windows Boot Manager. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert Your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
ENTER = Continue
ESC = Exit
If I press Enter I am greeted by another Windows Boot Manager screen.... that says "Choose an operating system to start, or press TAB to select a tool".
Troubleshooting I have done:
- I have tried to install the OS in different ways. i.e. with a formatted HDD, re-installing over error msg, swapped hard drives.
- I also inserted the "Windows 7 Repair disk" (I made the disk from my other windows 7 machine that is also 64-bit)
From there I boot it up, and it detects start up problems and tells me to click restart to fix issues. I restart and cross my fingers to only end up disappointed by the screen above. I have also checked and I do have boot from notebook HDD as my primary boot up device.
I've had a change in my boot up. After I get the BIOS screen, I get a 1 or 2 second screen that says that it cannot detect the C: drive. Then I get a screen that lasts for 20 seconds titled Windows Boot Manager. The Windows 7 item is highlited and if I press enter or wait the 20 seconds, Windows loads. All my apps work with no problem. It's more of a mild concern that it is of a problem.
View 3 Replies View RelatedI did a dual install on my desktop (Windows 7 home and Win XP clean installs on separate (sata)HDs with the other HD disconnected during install of each OS). Technically it's a triple since I have Linux Mint Debian on a third, thumbHD (same disconnect procedure there). I expected that to run smoothly. Well, it did the first few times, I could bring up the boot options (Esc on this one) and choose what drive to boot from. And a little while later this darned meddlesome win 7 boot manager shows up at startup and asks me what OS I want to boot from. I have to hit Esc real quick and bring up the boot sequence to chose what HD to boot from instead.
Because if I play along and choose an OS from the list any boot option but the Windows 7 fails. Any way I can get this meddlesome thing off my back? (It's like the good old annoying Office Assistant.)
(If I truly wanted this option, I'd probably install EasyBCD. I used that when I dual/triplebooted a couple of old laptops a few years back, and it was fairly nice. But right now I just don't need it.) I looked into BCDedit, which I am not terribly familiar with, but I couldn't quite find an option to shut down the BMS. (And I know better then to start deleting entries in there without proper backup. Barely, but still.)
I've installed 64bit win 7 on a 2nd partion of my main drive running vista 64bit. The installation all went smoothly and loaded into win 7.
But when restarted I did't get a windows boot manager screen so i could pick if I wish to load Vista or Windows 7, instead my system just loads straight into Vista.
Do I have to enable my system to be able to see the Windows 7 install?
How do I fix my comp? It is making a really loud sound and coming to a boot manager screen and the keyboard wont work.
View 1 Replies View Relatedthis is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View Relatedihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies View RelatedI find that the Windows 7 boot screen slows down the boot process on my machine. Is there a way to restore the old Vista scrolling loading bar? I know it's there as my netbook uses it.
View 6 Replies View RelatedI tried to install WIN 7 to a NEW HD (clean install) since you cannot do a WIN XP upgrade install. I left my old C: drive (WIN XP) hooked up while I installed WIN 7 to the NEW drive. Afterward I decided that my computer is too slow to effectively run WIN 7 so I took the NEW drive out (WIN 7 installation) and intend to put it in a new faster computer.Now when I try to boot up my old C: drive with WIN XP, I get a WIN 7 Boot Manager. What a PAIN in the A--. How do I get rid of the Boot Manager so my WIN XP will boot up normally?
View 1 Replies View RelatedI have a windows 7 home premium 64 bit. And when i start the system i get the following message.Boot Manager:Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Info: an error occurred while attempting to read the boot configuration dataI searched the forums. But unfortunately i don have the installation disc.Is there any other way to get through this.
View 1 Replies View Relatedon power up the computer goes to a screen and at the top says Windows Boot Manager. insert windows disc. language, repair, Status: 0xc000000f
info: boot selection failed because a required device is inaccessible. So, I hit enter and it always goes back to same screen. I will not let me F8!!! I will let me F2 and F12. I do not have any disc to reinstall windows.
I have a system running XP. I partitioned my drive in half and installed Windows 7. I tried to start XP again and messed it up. I think it's trying to use XPs boot manager. Do I need to re-install 7 to use it's boot manager?
Now that I know this .iso works great, I want to put 7 on a partition on my main Vista system. I can't afford to lose everything like I did on the XP system. When I tried to start XP after installing 7 I got an error. "windows root system32 hal.dll is missing or corrupt"
I can't have that happening to my main system. Is this normal? Did I do something wrong? Will it happen to Vista?
when we compress the disk space entirely by going to my computer --> right click on the c: drive icon ---> properties ---> compress disk drive, the compression utility in win 7 accidently may compress the boot manager files that include the file bootsect.bak and the boot folder also . when the computer is restarted the machine hangs up and says "boot manager is compressed " and shuts down .at the prompt type notepad (since the recovery option boots from a seperate wim image it has notepad built into it ) press ctrl + o which invokes the open file dialog go to the open file field (ALT+N) and type c:oot and also see for the c:ootmgr file. right click it and deselect the option of "compress files to save disk space" when we apply the boot manager is again decompressed. also if someone finds this harder we can directly deselect the compression option by reversing the process used to compress the drive thats it . we are done
View 1 Replies View RelatedI'm having an issue where my Windows boot manager is missing. However when trying to repair, there isn't even a win7 installation file on any of my HDDs. However if I search for a driver that may be located in a file, I can view all of my files on my C drive.
View 2 Replies View RelatedWhen I start my computer I receive a message that says "Windows Boot Manager: The boot selection failed because a required device is inaccessible.: When I try to use the Windows 7 Recovery Disk to repair the computer I get a blue screen of death. I have a reburbished Dell GX620 that currently runs Windows 7 that I believe orginally had Windows XP.
View 4 Replies View RelatedEverytime I start up i get this annoying screen:
1. How do I removed this from my startup
I have set my msconfig right:
and i also did disable here:
What the **** is wrong!
I am told that the Windows 7 OS uses a bootmgr to boot up windows. Can anyone explain this process in a way that I can understand.
View 2 Replies View RelatedWhen I turn on my computer windows boot manager pops out. How to get rid off it? I would like windows to start normally. Should I format my computer? (I did it twice yesterday)
View 9 Replies View RelatedI had XP with '03 media center edition. I installed Windows 7 over XP, so I was not expecting that every time I now turn on Windows 7 computer I always get the windows boot manager and have to choose Windows 7 to continue booting up. Is there a way to fix that so it does not come up anymore and just starts up on its own. I realize that even if I do not click it, it is already highlighted and will start up on its own after the countdown is done, but I was wanting to know if there was a way to fix that altogether.
Should also mention that on msconfig and boot menu, the only one listed is the Windows 7 OS system and is default.
I recently installed Windows 7 professional and had some problems with my first install, so I decided to reinstall. In the course of getting everything working on the the second install the Windows Boot Manager comes up everytime I turn on the computer.
It is very strange because: I have only Windows 7 installed on my computer and no other OS. The only selection is one instance of Windows 7 (I know sometimes when you reinstall the same OS will be listed twice, this is not the case for me) there is no countdown timer to automatically start windows. I have to press the enter key or it just stays there. Other than that, windows 7 is working fine for me. It is very annoying since I sometimes leave the computer after I turn it on and when I'm back it still is on the Boot Manager.
These are the things I have tried to get it working: I've went to msconfig-->Boot Tab and looked to see if there was a more than one OS listed. There is only one instance of Windows 7 listed. I went to my computer properties-->advanced system settings-->advanced and set the boot manager to not run, but it still comes up even after I change this setting I also tried reinstalling windows 7 twice. Once with just formatting the partition. Once with deleting the partition and recreating it before the install.
How does one edit the boot manager from within Windows 7?
View 2 Replies View RelatedI have installed Windows 7 on my MSI Wind Netbook using a new Seagate 320gb sata drive and every time I power on, Windows Boot Manager loads and I have to select Windows 7 as the OS even though it's the only OS that has been installed. The first time I installed I let Windows 7 create the partitions but I thought that might have been the problem because of the 100mb system drive it created so I deleted everything, made 2 partitions and installed Windows 7 on the active partition but still it boots into Boot Manager. I've been into msconfig and Windows 7 is the only OS and there is no delay set but still it persists. I've also tried EasyBCD but it made no difference either. The ONLY time it doesn't boot to Boot Manager is if I have the external USB DVD drive connected with the Windows 7 disk inserted... then it says press any key to boot from CD/DVD which I ignore and Windows 7 loads normally.
View 9 Replies View RelatedHow do I make windows 7 boot into a thumb drive?I've tried f8, (f9 like it says when it boots up) and it still won't work
View 7 Replies View RelatedI'm having a problem every time I power on the system. I'm dual booting vista ultimate with win 7 build 7100; with vista I have no problem, but with 7 every time I start the system the first boot attempt gives me the error 0xc000000e after the boot manager display: "the boot selection failed because a required device is inaccessible".;after a reset the system boots 7 with no problems. Win 7 is installed in a brand new hd(seagate barracuda 1.5tb) and vista on a second hd.
I've search the web for people with a similar problem with no success. I've tryed already many solutions but the problem persists(latest bios for the motherboard, latest intel sata drivers, etc). I'm hoping that this could be a bug in win 7 instead of a hardware failure for the hd. Again, the strange thing is that this only happen after the power on. After that first error, no matter how many reboots, the system always boot without problems.
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies View Relatedhave beeen reading through this amazing forum for the past couple of days trying to get my Dell 1545 working again, i have tried to reinstall the OS from a disc that came with the lpatop, to no availi created a system restore disk from the machine i'm writing this on....still to no avail....i can get into the setup menu's but like many others i can't get any further, I don't know how to get into the BIOS menu (and to be honest wouldn't know what to do if I did
View 9 Replies View RelatedI already went to "msconfig" and chose my default OS. Bios still stops at the Windows Boot Manager to show me the only OS there is for me to choose/use. How can I go straight to my desktop without the Boot Manager?
View 2 Replies View Related6 months ago I installed windows 7 on a new PC I built. I then decided to switch to a 64 bit system which I did. I bought another HDD and decide to add a second drive with windows XP.I ended up with a system which had windows 7 shown twice on boot up and only one would bring up windows 7. Windows XP was missing. I removed the second drive and it worked fine but I still had 2 Win 7 prompts on boot up.I have a virus or root kit which I can't find or remove so I decided to format the C partition and reload windows 7. The problem is although I have the bios set to boot from the cd with the Win 7 disk, it comes up with the boot manager missing message and I can't get around this.I tried another HDD and get the same message. How do I get rid of this problem where i can re install win 7?
View 1 Replies View RelatedI am trying to install Win 7 Ultimate x64 on my roommates laptop. It was having severe issues booting into 7 already so I decided to just wipe it and re-install. I started with a DVD copy and upon boot he realized that his DVD drive was broke. FML. But we can boot from USB so I go buy a large flashdrive and DL a copy of Windows 7 and make it boot-able. So I plug it in and when it starts to load windows files it makes it about 10% and stops.
Then throws an error 0xc00000e9. "An unexpected I/O error has occurred".
Now I know my USB is good, I just bought it. The DVD Drive is messed up but its not being used in any way. It's an older Sony vaio, Core 2 Duo, 2gb ram, the model is burnt off the bottom.
