I've had a change in my boot up. After I get the BIOS screen, I get a 1 or 2 second screen that says that it cannot detect the C: drive. Then I get a screen that lasts for 20 seconds titled Windows Boot Manager. The Windows 7 item is highlited and if I press enter or wait the 20 seconds, Windows loads. All my apps work with no problem. It's more of a mild concern that it is of a problem.
View 3 Replies
My laptop usually lasts about 5 minutes before seeing the blue screen appear. The error continues to say it has to do with the ataport.sys. Here is the error message I received during the last BSOD: [code]
View 1 Replies View RelatedI used to have both XP & 7 & removed XP. I used to have to select from a black & white screen called Windows Boot Manager. Now it shows only 7 and I have to select it. How do I get rid of this screen?
View 1 Replies View RelatedI have tried at least 5 times installing the OS by using Recovery DVD's that I order from HP. I am able to boot from the DVD's and go through the process of Inserting Disc 1, Disc 2, and Disc 3. Once the setup is complete, I am prompted to Click Continue so that the system can restart the computer and continue the windows 7 Installation. It never even starts the installation. It gives me the following screen:
Windows Boot Manager. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert Your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
ENTER = Continue
ESC = Exit
If I press Enter I am greeted by another Windows Boot Manager screen.... that says "Choose an operating system to start, or press TAB to select a tool".
Troubleshooting I have done:
- I have tried to install the OS in different ways. i.e. with a formatted HDD, re-installing over error msg, swapped hard drives.
- I also inserted the "Windows 7 Repair disk" (I made the disk from my other windows 7 machine that is also 64-bit)
From there I boot it up, and it detects start up problems and tells me to click restart to fix issues. I restart and cross my fingers to only end up disappointed by the screen above. I have also checked and I do have boot from notebook HDD as my primary boot up device.
I did a dual install on my desktop (Windows 7 home and Win XP clean installs on separate (sata)HDs with the other HD disconnected during install of each OS). Technically it's a triple since I have Linux Mint Debian on a third, thumbHD (same disconnect procedure there). I expected that to run smoothly. Well, it did the first few times, I could bring up the boot options (Esc on this one) and choose what drive to boot from. And a little while later this darned meddlesome win 7 boot manager shows up at startup and asks me what OS I want to boot from. I have to hit Esc real quick and bring up the boot sequence to chose what HD to boot from instead.
Because if I play along and choose an OS from the list any boot option but the Windows 7 fails. Any way I can get this meddlesome thing off my back? (It's like the good old annoying Office Assistant.)
(If I truly wanted this option, I'd probably install EasyBCD. I used that when I dual/triplebooted a couple of old laptops a few years back, and it was fairly nice. But right now I just don't need it.) I looked into BCDedit, which I am not terribly familiar with, but I couldn't quite find an option to shut down the BMS. (And I know better then to start deleting entries in there without proper backup. Barely, but still.)
When I boot my Win7 system then the Boot Screen (where I can press ESC resp F2 to enter the BIOS)appears only for a couple of MILLIseconds.This is too short.Even worse: Sometimes the Boot Screen is completely not visible any more.How can I tell the system to show this Boot Screen for lets say 5 seconds minimum?
View 3 Replies View RelatedI've installed 64bit win 7 on a 2nd partion of my main drive running vista 64bit. The installation all went smoothly and loaded into win 7.
But when restarted I did't get a windows boot manager screen so i could pick if I wish to load Vista or Windows 7, instead my system just loads straight into Vista.
Do I have to enable my system to be able to see the Windows 7 install?
How do I fix my comp? It is making a really loud sound and coming to a boot manager screen and the keyboard wont work.
View 1 Replies View Relatedi recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies View RelatedI am running Windows7 Ultimate 32bit for almost 1 year.But now for approx one month i am having a problem and the problem is that when I enter the password at login screen the welcome screen appears for at least 30 second and after desktop appeared, the icons appear after 5-6seconds.I have applied all the fixes from Microsoft and also searched the internet but none of them solved my problem.I also uninstalled unnecessary programs, disabled startup programs, turned off Aero but none of them work too.
Here is list of programs installed on my PC: [URL]
I am have a problem with my windows 7 pc. My computer goes to the log on screen (enter password) if it sits idle for about 50 seconds. I tried to change the sleep settings but it does not work.
View 3 Replies View RelatedMy Windows 7 - 64 bit takes about 12-15 seconds loading in the login screen before it loads the desktop. I only have three startup programs running, Avast 7, Realtek Audio, and Catalyst. I don't have a password and only have one account (admin). I know that 12-15 seconds is not so much of an issue but I think that the normal waiting time is only less than 5 seconds and I think 12-15 seconds is not right because I am running Windows 7 on a Core i7 950 3Ghz and 7200rpm Hard disk. I already defragged my hard disk using Auslogic Disk Defrag and scanned my computer for virus.
View 4 Replies View RelatedI just installed windows last night without any software on it but all the drives it takes about 30 seconds from putting in my password. I have nothing what so ever running in startup so I'm a bit confused. I'm using Crucial brand new SSD and 16gigs of G.Skill ram and both are working fine. I didn't update windows.
View 9 Replies View Relatedthis is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View Relatedihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies View Relatedmy laptop's screen keeps going dark after being on for only a few seconds. When the screen goes dark, I have to move my mouse around to get the screen to come back on which it usually does. After a few minutes of doing this, my screen stays on. I am running Windows 7 Ultimate 64 bit. I do have McAfee anti-virus protection. I just recently ran a virus scan which came up clear of any viruses. I also tried adjusting when the screen goes dark
View 1 Replies View RelatedWhy not get a new computer? Because my dad wants to keep this computer going for as long as possible to not spend money for a new computer.How can I fix this blue screen of death?
View 1 Replies View Relatedwhen i open a browser like internet explorer or windows live mail. The monitor screen blanks for a few seconds.I have an Nvidia Gforce 260, running windows 7pro. Amd dual core processor.The trouble started after updating my video and DivX drivers to play duke nukum.I think it may be a driver issue because it happened about a year ago as well but eventually stopped. I have changed resolution settings with no effect to the blanking screen.
View 1 Replies View RelatedI have run into a little bit of an annoying problem while logging onto my computer. I get to the login screen, enter my password, it then says welcome and fades out like usual. But insted of it going to my desktop it just goes blank for five to ten seconds with only the curser in the center of the screen spinning round as if it was loading somthing.I have had this problem for a few months now and have lived with it. I know it is just my user account because I tried making a new account and it works perfectly.
View 3 Replies View RelatedOn startup, the Windows desktop shows up, but after a few seconds the screen went blue, with no text of any kind. When I turned my computer on and off manually, I get a black screen that asks me if I want to go into safe mode. It says to use the arrows keys and press enter to choose which mode to go into, but the keyboard is unresponsive at this screen.
What do I do? How do I get into safe mode? Do I need to bring my computer in to the computer repair shop?
My system is:
Intel Core i7-920
Diamond Radeon HD 5970
Patriot DDR3 6GB 1333MHz Tri Channel
Gigabyte GA-EX58-UD3R
Corsair CMPSU-650TX- 650W
WD 750GB Serial ATA/300HD, 32 MB buffer
Cooler Master HAF 932
Lite-On 24X SATA DVD-RW Gen II
Netgear WG311 G PCI 54 Mbps Wireless-G PCI Adapter
Windows 7 Home Premium
windows 7 x64 on my laptop (intel core i5 @ 2.50ghz, 4 gb ram) has recently started freezing for a few seconds every few seconds, when i'm doing just about anything: browsing the web, copying files, using text redactor, etc. only the mouse cursor responds, control is back after a couple of seconds.
* the behaviour remains the same when booting in the safe mode
* there are no cpu or memory usage peaks in process explorer
* there are no hardware conflicts in device manager
* there are no critical errors in system log
* there is no antivirus active
* hardware tests (memory, etc.) do not report any errors
i suspect this has started after i've updated all the drivers from manufacturer's site, but i am not 100% sure. anyway, i do not know which driver has caused this and i cannot easily restore to the previous state.
I got a BSOD yesterday which was most likely from overheating and now 30-60 seconds after I boot it normally, it freezes yet my mouse still moves. Ten second later, all the screen shows is my background. I've tried system restore, then I went it BIOS and ran a test on the system memory which passed, scanned for malware and spyware, used both CCleaner and IObit Advance SystemCare to clean up registry and junk files, and then defragmented the hard drive expecting that might do something and it still freezes.Edit: I've been looking at the start ups and don't see anything that suspicious.[CODE]
View 3 Replies View RelatedSo my keyboard and mouse are completely usable in the bios and during boot, but once the windows login screen opens up, there is a 30+ second delay before the keyboard and mouse become active. This doesn't appear to be a freeze or lag of any type, just like the keyboard and mouse hasn't been recognized yet. I have a printer and several external drives connected to my computer's USB ports, so I tried unplugging everything but the keyboard and mouse. The time goes down to about 5 seconds, however, the last few times I've tried, there was about a 10 second wait for the mouse to work after the keyboard worked. With only the mouse and keyboard plugged in, I feel this must be either 1) an issue with drivers loading or 2) a specific issue with my USB drivers. Here's what I've done so far to try and troubleshoot. Not sure what to do next.Used google (couldn't find anything that looked related enough to try)Unplugged everything but keyboard and mouse from USB ports - Decreased lag time to 5-15 secondsenabled boot logging, checked file for drivers not loading (attached)Checked bios for legacy USB enabled (it was)Double checked AV software (only MS Security Essentials and Malwarebytes installed, malwarebytes does not run any processes unless I start it up)Having multiple USB devices plugged in upon boot should not delay the usability of my keyboard and mouse.
View 1 Replies View RelatedMy Grandchildren were playing with the keyboard on my HP lap top (windows 7) and during their manic pressing of the keys within 10 seconds had managed to turn the screen upside down, everything is there only the screen is affected.
View 4 Replies View RelatedI am working on a friend's Compaq Presario CQ-62-231NR laptop. It runs Windows 7, 64bit.The computer was purchased about a year and a half ago. When I startup the computer I get the screen saying the computer wasn't shut down properly before....do you want to start up in safe mode, etc. No matter which option I choose it freezes shortly after the welcome screen comes up. Its within seconds. Any advice on how I could resolve this problem? The Windows 7 software was installed prior to purchase and she never created a system restore disc...so I do not have any software discs to reinstall with
View 1 Replies View RelatedI find that the Windows 7 boot screen slows down the boot process on my machine. Is there a way to restore the old Vista scrolling loading bar? I know it's there as my netbook uses it.
View 6 Replies View RelatedI tried to install WIN 7 to a NEW HD (clean install) since you cannot do a WIN XP upgrade install. I left my old C: drive (WIN XP) hooked up while I installed WIN 7 to the NEW drive. Afterward I decided that my computer is too slow to effectively run WIN 7 so I took the NEW drive out (WIN 7 installation) and intend to put it in a new faster computer.Now when I try to boot up my old C: drive with WIN XP, I get a WIN 7 Boot Manager. What a PAIN in the A--. How do I get rid of the Boot Manager so my WIN XP will boot up normally?
View 1 Replies View RelatedI have a windows 7 home premium 64 bit. And when i start the system i get the following message.Boot Manager:Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Info: an error occurred while attempting to read the boot configuration dataI searched the forums. But unfortunately i don have the installation disc.Is there any other way to get through this.
View 1 Replies View Relatedon power up the computer goes to a screen and at the top says Windows Boot Manager. insert windows disc. language, repair, Status: 0xc000000f
info: boot selection failed because a required device is inaccessible. So, I hit enter and it always goes back to same screen. I will not let me F8!!! I will let me F2 and F12. I do not have any disc to reinstall windows.
I have a system running XP. I partitioned my drive in half and installed Windows 7. I tried to start XP again and messed it up. I think it's trying to use XPs boot manager. Do I need to re-install 7 to use it's boot manager?
Now that I know this .iso works great, I want to put 7 on a partition on my main Vista system. I can't afford to lose everything like I did on the XP system. When I tried to start XP after installing 7 I got an error. "windows root system32 hal.dll is missing or corrupt"
I can't have that happening to my main system. Is this normal? Did I do something wrong? Will it happen to Vista?
