Replaced PSU And GPU - BOOTMGR Missing Error On Boot Up
May 29, 2012
Recently I have had a load of hardware issues which have caused me to replace my PSU and GPU. After doing so to more powerful units, I went to boot up again and got the error: "BOOTMGR is missing"
I have had this before when I remove my secondary HDD and just try and boot from my primary SSD, but after re-connecting the secondary HDD it would work again (telling me this BOOTMGR is on the HDD, even though the Windows files are on the SSD).
I don't know what to make of this as if I boot from the SSD alone nothing happens and it restarts, and if I connect the HDD and it boots then it goes into the System Recovery and after repairing/restoring still won't work. I think the BIOS settings are correct, with the SATA drives set to AHCI (as I'm 99% sure they were before).
My PC specs are:
Intel i7 980X
Intel DX58SO Motherboard
128GB OCZ Vertex 3 SSD
2TB WD HDD (secondary)
Radeon 7850 2GB GFX
8GB DDR3 RAM
Windows 7 Ultimate
My pc didn't boot, so I used a SATA --> USB docking station to format my hard drive (NTFS). Then I took an old hard drive, and transfered all of it to my new one.
Now I get the BootMGR is missing error when I boot my pc.
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
My PC recently would not boot up. Even in repair it would freeze, reinstalling windows did not help and eventually anything I loaded whether repair, setup of windows or straight boot into the OS would result in a BSOD error. I replaced HD and was able to boot in finally and reinstall windows.Everything was fine then I got one new BSOD which was 0x000000124 and my PC rebooted. I googled this and it showed general hardware failure but I can not identify the issue.I ran Hard drive test even though I just replaced it, no problems, ran memtest over night and got 8 passes with no errors.
I have Windows 7 installed on my laptop.I want to use some games for Windows xp.But i tried windows xp mode and it want work becouse i have low memory just 1gb in my windows 7 then in windows xp mode i have just 256 mb. And i want to install windows xp in dual boot with windows 7 but when i start windows xp it says program is blocked due compatibility issues?While i dont have cd drive on my Viewsonic laptop i use usb flash drive.When i try to boot windows xp or other software from my usb flash drive it says bootmgr is missing and it cant boot.Please help with that issue also i tried to use startup reapir and recovery disk from my usb flash drive but it want boot recovery disk also?
Last night I tried to absorb a 3gb partition. Tried to shrink, delete... couldn't get it back into c:, so I just made it back into a partition, different letter. I left the disk manager open when I put the computer to sleepAlienware M11x r2.Turned it on this morning, got the bootmgr missing. I dug out the original microsoft disk, plugged in my external firwire cd drive, and tried to boot from there.The setup utility showed the cd drive after I plugged it in, but choosing it doesn't seem to stick. Then rebooting doesn't behave differently. Trying to reboot from network works, says cable not connected.
I have a HP DV9000 Laptop that was originally on Vista. It playing up so I bought a genuine version of Windows 7 to install.. I have put the CD/DVD ROM to boot 1st in BIOS and have saved the changes several times but nothing seems to work??
Also when I press F9 on boot it comes up with Change Boot order and the only option it gives me is.. 4. Netbook Hard Drive?
I'm very sure, especially if you've ever installed a second HDD on your computer yourself you have seen this message. BOOTMGR is missing Ctrl+Alt+Del to restart.Basically when it says to restart it is assuring you no treatment will work, WRONG! this is one of the easiest problems ever to fix, if you have your Windows 7/Vista installation disc.First step - Boot from installation mediaSecond step - Go through everything until you find a button that says "Repair your computer"Third step - Let it run though, on the first time, it will not find a WORKING operating system, restart when it prompts and boot the disc again.Forth step - Repeat Second step, and now your OS should be listed, click on it and run Startup Repair.Fifth step - Do NOT boot from disc, because it should now be fixed.this i have only tested on 7, idk if this completely complies to Vista)
I partitioned my HD in attempt to dual boot linux. But with a botched install of linux, I am now getting the above error when I try to boot back into windows. I have booted from an install dvd, gone to the command prompt and ran these commands I found in another thread.
I recently decided to move a hard drive I've had in an external enclosure to inside my case. After I did this I got a bootmgr is missing error on startup.
Things that may be useful to know:
I have 3 hard drives (this new one being the third), one 60gb for my operating system, one 160gb for other junk, and now this 1tb one I've just put in.
My 60gb operating system drive is connected using an IDE cable, the other two using SATA cables.
I've checked all plugs and connectors in the case.
I've checked the boot order in the BIOS, sometimes the 60gb drive doesn't even show up, sometimes it does. My boot order is CDROM, then HDD(60gb one obviously). So startup will go like this: Bootmgr is missing, go into BIOS, check boot order, HDD not showing up, restart, Bootmgr is missing, go into BIOS, HDD is there, exit and startup ok. except sometimes I have to restart it a few times before it'll show up.
If I have posted this in the wrong thread, then let me know which would be the best thread to post in and Ill move it there.
Update: Just crashed with a blue screen, it restarted itself but now I'm getting "a disk read error occurred" message. I restarted it and I got "Bootmgr is missing" again.
I got this horrid message a few days ago, and I cannot find a solution! I've tried all of the "solutions" here: http://support.microsoft.com/kb/927392 with no luck..Before I use a last resort (like reinstalling the OS),
Managed to break my PC again in my usual form. So I recently bought a new SSD and did a fresh installation of Windows 7 on it. Everything boots fine - until I get nitpicky about the boot times and start changing some settings in the BIOS. To give some background, I was initially trying to resolve a problem with slow boot times on my GIGABYTE P55A-UDL3. There is a 10sec delay after the "Loading Operating System" message. Windows splash screen onwards only takes 5 secs. I read somewhere that this had to do with having the CD-Rom as the first boot device. (Don't even want to get started on the AHCI BIOS itself already adding another 2-3secs) Anyway, if I recall correctly I did some (supposedly harmless stuff like) moving my SSD to the #1 priority in the BIOS list and also set Hard Disk as the first (and only) Boot Device. Boom. BOOTMGR is Missing.
While coverting my HP pavilon desktop with dualboot ( Fedora + XP) to windows 7 , I accidentallydeleted (probably ) the boot partition. I could notinstall win 7 from the CD. However I was able toinstall Ubuntu 11.10 from installable USB.Pl guide me to correc the bootmagr error & installwindows 7 from the CD.
My computer recently began to give me bsod and would not detect external devices, i.e. external hard drives, wireless adapters, and other usb devices. The issue windows gave me as the cause was that these devices did not have digital signatures. After online research and a trip to the geek squad, I determined that all of my hardware was in perfect working order. I tried to remove and re-install my copy of windows 7 64 bit ultimate but found that my disk was, despite being unscathed, unreadable and unusable.
I found several articles about creating a bootable USB drive with an ISO of the disk. I have the ISO on my laptop and have been trying to get my USB to operate on the desktop, which due to blue screens and automatic restarts gave me no recourse but to wipe it completely. As I stand now I have partitioned the USB drive as fat32 after doing a cmd prompt cleaning and have loaded the iso on using several different programs including the official Microsoft USB creator. All but one have produced the same error saying "error loading operating system" when booting from just the USB. The only program to produce a different result was YUMI which loaded a program that launches on start up and gives me the option to use the Windows 7 ISO but then produces another error saying "Error 27: Unrecognized Command"
Have I missed something in the formatting process or does the fact that the Windows USB creator re formats the USB as NTFS before every ISO upload mean that I cannot load my copy of Windows 7 this way?
I wiped my HDD clean with the Ultimate Boot CD and the DBAN application. I formatted a USB device to NTFS and extracted a Windows 7 ISO to it. After I wiped the HDD with DBAN, I formatted the HDD with GParted to NTFS. Now, when I try to Boot the laptop with the USB that has the extracted version of Windows 7, it is telling me that the bootmgr is misssing, when it is on there! I tried buring the ISO to a dvd, but then I got he fabulous stop error message basically telling me that I have bad media (bad DVD). I even tried using an external HDD with the extracted Windows 7 ISO on it and got the same bootmgr is missing error.
Method 1: Message states a fix was made.Root cause found: The partition table does not have a valid System Partition.
Repair action: Partition table repair Result: Completed successfully. Error code = 0x0 However, problem persists after reboot. The wizard indicated that multiple reboots may be necessary, but the wizard does not restart after reboot.
Method 2: Attempted to use Bootrec.exe /FixMbrMessage: The operation completed successfully.
Attempted to use Bootrec.exe /FixBoot Message: Element not found. Attempted to use Bootrec.exe /RebuildBcd Message: Element not found.
Attempted to export and delete the BCD.The command bcdedit /export C:BCD_Backup returned:The store export operation has failed.The requested system device cannot be found.Method 3: When I attempt a system restore, it errors with: To use System Restore, you must specify which Windows installation to restore.When I view the System Recovery Options dialog box, no Windows installation drives are listed.In addition, when I view the C: drive in the DOS window (my Windows installation drive), that drive lists as empty.
i cannot boot my Windows 7 64 bit Dell Studio 1558.Cannot boot to Windows.Error(s)BOOTMGR IS MISSING , CTRL + ALT + DEL TO RESTART. Description:
1. Initally had two partitions .. C and D .. 2. Tried to merge C and D to make C more by using Partiton Wizard. 3. Computer Restarted. 4.BSOD at Starting windows logo 5. Stuck at boot. 6. Launched Windows repair. 7. Unable to do repairs. 8. Dell restore unable to locate present installation. ( "current installation : (Unknown) at Unknown drive) 9. Checked partitions using DISKPART at command prompt. 10. Tried to change active partition . Restarted. 11. BOOTMGR MISSING ERROR. Dont even go to startup repair. 12. DVD DRIVE of LAPTOP NOT WORKING so made Windows Startup repair USB bootable. 13. Now have Access to Recovery Menu. 14. Made Partition Wizard Bootable USB . Now have access to Partition Wizard Also. 15. Tried installing Windows 7 using USB. Got error "installation error. verify windows sources are accessible Windows 7 Instalation Problem - Error Code 0xC0000005. 16. Stuck at boot now.
I checked OS drive in partition wizard bootable , it is intact..Windows installation is there....Every drive is ok but somehow booting not from that drive.I will attach photographs of Partition Wizard Partiton status.
I spent the day trying to fix my operating systems boot.
Earlier in the day i tried to install a MacOSX (I've formated the second hard-drive asoff now) on a seperate hard-drive (CRIVE AKA Windows 7 drive was unplugged). After i was done i decided to plug in the c drive because i wanted to get on windows to setup dualboot. But for some reason it said bootmgr missing...
I've tried bootrec /fixboot and the other ones.
I just checked my drive somehow Cdrive turned in to D drive would that be the problem? Could somebody please show me a way to change from D drive to C drive?
If this would help nail the problem. Also tried to boot the hard-drive from my laptop via esata. I get a different problem i get a blue screen during the Windows seven loading screen. Heres the stop code: 0x0000007b.
Basically what originally happened was that I tried installing windows 7 off of my hard drive and during the "completing installation" phase the computer lost power and was shut down. Turning the computer back on iIhad a screen which said something of the likes of set up is starting. From then on I was in a infinite boot loop where it would give me a set up screen and restart. I desperately needed to backup my files which I did not bother to do so.
I used my secondary desktop running vista, plugged in my other hard drive and backed up all my files successfully. I thought I would format the disk since I was done backing up all my data and I would go right on ahead and install a fresh windows 7 via the CD. I go into bios and set the windows CD to boot and I unplug my vista hard drive and leave only the formatted 1TB HD plugged in. And now I get the "BOOTMGR is missing" error. As I have read it's due to deleting everything off the hard drive including the...bootmanager.
Now with the tools that I hold (mobo with bios access, windows 7 installation CD, another hard drive with Vista). How shall I go about getting my hard drive ready to install a fresh copy of windows 7. I have the retail cd, I have another HD with vista if needed, and I have the clean hard drive which i would wish to install windows 7. I set my bios to boot via the CD first and put in the disc and let it work it's magic, I would like to point out that it still gives me a BOOTMGR error. It asks me to press a key to load from the CD and then I get the error that I know is coming.
I have a hp G71-449WM Notebook running Windows7 premium 64bit. I can't boot computer the repair disc I have doesn't seem to work. I have no installation disc to fall back on and I can not seem to get it to boot in safe mode. Right now its asking me to find the needed driver in the driver folders. Unless it's called something else I do not see a bootmgr driver. Right now its asking me to connect to the network which would be cool but i don't know what folder they where asking me to type in.
I have had number of errors, the latest being 'Error number: 0x80070017' when trying to install windows 7. I'll start from the top. Originally I had problems exactly the same as on this thread below, incl same model PC except with Vista, also USB mouse often freezes or stops working: [URL]. I ignored the problem until crash during online streaming (assumed problem was to do with graphics card), usual multi coloured horizontal lines on monitor, repeating sound. Manual push button shutdown.
On restart, black screen no boot activity. Recovery DVD doesn't work/ don't have all the discs. So I bought Win 7 upgrade instead. Now I have a combination of 'BOOTMGR is missing', and when that doesn't occur PC freezes on any screen you can think of. Sometimes I can get all the way to 'expanding files' when installing Win 7, then I get Error number: 0x80070017. I have tried copying DVD to USB drive (in case it's a dvd drive speed problem), but then cannot copy the whole DVD usually there's an error stopping me (on another pc).
Also no OS available to select during repair system selection on Win 7 upgrade/install screens. Finally error regarding 'USB drive unplugged during boot' or something to that effect, also tells me DVD or CD or hard drive might no be connected properly. Had that message twice, again locks up. I've checked inside, every thing connected.
So to summarise: Bootmgr missing (on boot) Error number: 0x80070017 (on Win 7 install) No OS available to select (System repair) Constant freezing
It is a packard bell with windows 7, bought from a large electrical chain, so no support there -it didnt have a restore disk but I have downloaded one, and also made one from daughters laptop. The screen is black with white warning saying BOOTMGR is missing, press Ctrl+Alt+Del to restart, When i do this the same happens. I have pressd F12 and booted from downloaded disk.first i get a black screen saying windows loading. then a grey box tha says system recovery options and keyboard input method - a drop down option - i choose united kingdom and hit next.
I constantly get this error everytime i try to boot up, i also cannot boot from a recovery disc for some reason as i just get the same error. I've removed the RAM and HDD and put them back but i still get the same.
I made the HDD formatted and it's in NTFS format. The disk for some reason says Bootmgr is missing. Also when I try to install Windows 7, it says error code: 0x80070017. I don't have any OS installed. I've tried the repair disk thing. Also my BIOS is PhoenixBIOS (or something, that what it says on the BIOS Setup Utility menu) and I don't know how to disable AHCI mode.
So I tried installing Windows on my new machine and did waht seemed to be the recommended thing and plugged in only my SSD into the Sata port, leaving my other drives unplugged until after the installation. Everything went fine and I was able to get Windows 7 up, drivers were installing and everything was peachy, but Then I plugged in my other drives, and when I did so with the computer running Windows immediately recognized them and I could access them, as well as do whatever I wanted. However when I restarted I got the message BOOTMGR is missing.
Now, you may be thinking that this is a simple issue of it trying to load from one of those other HDDs, just set the boot order in the BIOS blah blah. But its not. I set the boot order in the BIOS to use the SSD, I set the SSD to the top of the list within the HDDS priority order and still nothing. I then took it a step further and instead of selecting the order manually told it to boot from the SSD flat out, boot from this drive and the same error message came up. I already did the boot from Windows disc, startup repair thing - didn't work.
I have just installed a new P5G41T-M LX Series motherboard and two DDR3 x 2GB replacing DDR2. During startup a message says BOOTMGR is missing, press Ctrl Alt Delete to restart, on restart the same message is repeated.
I took out my wireless card to clean off the extra dust, when I replaced it back into my mother board I found that I no longer receive signal from my Graphic's card to my monitor. I also noticed that during my computers normal booting up process there was no "beep" like the computer normally gives as to loads windows 7.
So when I turn on my pc my monitor says there is no signal. My monitor is hooked up to my graphics card instead of the mother board. (I have yet to find the cord that plugs into the mother board, I've misplaced it.) When I boot the system up the fan runs and it makes every noise it should except the beep just before loading the OS.
my sister has Sony Vaio E-Series which runs windows 7 Home edition. She encountered a problem starting up the windows and decided to use Recovery Disk, Recovery Disk stopped working and needs additional source (disk) to run. She weren't successful so decided to stop recovery and run it again. After that the error "BOOTMGR is missing" appeared! When I put the recovery disk inside the machine it doesn't work. F8 and F4 keys also don't work. So I can't use the similar solution mentioned on the internet like running "system restore". She also doesn�t have Windows 7 installation disc to run.
I'm having trouble installing windows 7 from my flash drive onto my netbook that runs winxp.
Where I used UNetbootin on my Vaio (Vista) laptop computer to burn an iso image to my flash drive. I then booted up my netbook, entered BIOS, changing the USB booting priority to the USB. However, I then get the error bessage "Error BOOTMGR is missing ctr alt del" .
I recently decided to move a hard drive I've had in an external enclosure to inside my case. After I did this I got a bootmgr is missing error on startup. Things that may be useful to know:
I have 3 hard drives (this new one being the third), one 60gb for my operating system, one 160gb for other junk, and now this 1tb one I've just put in,My 60gb operating system drive is connected using an IDE cable, the other two using SATA cables.I've checked all plugs and connectors in the case.I've checked the boot order in the BIOS, sometimes the 60gb drive doesn't even show up, sometimes it does.
My boot order is CDROM, then HDD(60gb one obviously).So startup will go like this: Bootmgr is missing, go into BIOS, check boot order, HDD not showing up, restart, Bootmgr is missing, go into BIOS, HDD is there, exit and startup ok. except sometimes I have to restart it a few times before it'll show up.
If I have posted this in the wrong thread, then let me know which would be the best thread to post in and Ill move it there.Update: Just crashed with a blue screen, it restarted itself but now I'm getting "a disk read error occurred" message. I restarted it and I got "Bootmgr is missing" again.
So I was doing the steps in this thread, and I came to the point where you set the partition to 'active. However,I accidently turned my computer off and now it tried to boot from that partition and it gives me the error message "BOOTMGR is missing" because I literally don't have anything on the disk yet. No Windows 7, nothing.
My question for you is: Can I change the partition that is being booted in BIOS or how do I change that?
