Couldn't Boot Up PC, Replaced HDD And Now Get 0x000000124 Error

Sep 19, 2012

My PC recently would not boot up. Even in repair it would freeze, reinstalling windows did not help and eventually anything I loaded whether repair, setup of windows or straight boot into the OS would result in a BSOD error. I replaced HD and was able to boot in finally and reinstall windows.Everything was fine then I got one new BSOD which was 0x000000124 and my PC rebooted. I googled this and it showed general hardware failure but I can not identify the issue.I ran Hard drive test even though I just replaced it, no problems, ran memtest over night and got 8 passes with no errors.

View 1 Replies


ADVERTISEMENT

Replaced PSU And GPU - BOOTMGR Missing Error On Boot Up

May 29, 2012

Recently I have had a load of hardware issues which have caused me to replace my PSU and GPU. After doing so to more powerful units, I went to boot up again and got the error: "BOOTMGR is missing"

I have had this before when I remove my secondary HDD and just try and boot from my primary SSD, but after re-connecting the secondary HDD it would work again (telling me this BOOTMGR is on the HDD, even though the Windows files are on the SSD).

I don't know what to make of this as if I boot from the SSD alone nothing happens and it restarts, and if I connect the HDD and it boots then it goes into the System Recovery and after repairing/restoring still won't work. I think the BIOS settings are correct, with the SATA drives set to AHCI (as I'm 99% sure they were before).

My PC specs are:
Intel i7 980X
Intel DX58SO Motherboard
128GB OCZ Vertex 3 SSD
2TB WD HDD (secondary)
Radeon 7850 2GB GFX
8GB DDR3 RAM
Windows 7 Ultimate

View 1 Replies View Related

Couldn't Find Boot Disk Error While Installing Windows 7 Using USB?

Aug 8, 2011

I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I opened the setup log file(setuperr.log), it shows the error "Couldn't find boot disk on the BIOS based computer". Have anyone got this error before

View 9 Replies View Related

BSOD Playing Diablo 3, Error 0x000000124

May 22, 2012

I've been getting a BSOD with the 0x000000124 STOP code while playing D3. It's not very frequent, maybe once or twice in a 4 hours span. It's happened after long periods of playing and after very short periods.

Windows 7 . . . - x64 - the original installed OS on the system? YES - OEM - What is the age of system (hardware)? ~1 year old - What is the age of OS installation ~1 year old

View 3 Replies View Related

OS Will Not Boot Since Motherboard Replaced

Oct 16, 2012

Motherboard died in a custom arcade machine, Replaced motherboard but of course it will not boot. Anyway i can get the serial key for windows "out" of the hard drive? This is a custom machine with no sticker. Also, if by doing a fresh install, will I lose any data on hard drive?

View 4 Replies View Related

Couldn't Boot From HDD / Still Detected In BIOS However

Feb 28, 2012

a friend of mine asked me to look at his laptop the other day.It had stopped booting to windows.No OS detected, couldn't boot from HDD, still detected in the BIOS however. It's on a laptop which has 2 IDE connections so I switched the drive to the other and changed the boot order, same problem. The disk was essentially full and he was after a new one so I suggested now could be the time. Anyway the new HDD arrived today, got hold of a copy a Windows 7 and installed it, laptop now boots fine into the new copy of windows, everything is running OK but he needs data off the old HD. I thought the new OS would be able to access it but it isnt recognised in my computer. It is still recognised as the secondary drive in the BIOS and in windows drive management but cannot access it.Drive management can see it and says the device is working properly but it wont initialize, wont turn offline and any access attempt comes up as an I/O error.It has win7 and all his data on so formatting to just save the hard drive for storage isnt an option (just yet).

View 1 Replies View Related

Mirrored Configuration - Hard Disk Failure Error / Replaced With SSD?

Sep 10, 2012

My existing dual boot winxp/Windows 7 mirrored configuration appears to have issues. I ordered a SSD hd today from newegg. Question: new install, or just re-image the SSD? If I do new install, do I have to have a authorization from Microsoft? I purchased this Windows 7 Professional 2 years ago...

View 1 Replies View Related

Got An Error Saying It Couldn't Copy The Upnphost.dll File

Oct 6, 2011

i have wondows XP and i went to update to SP3 and i got an error saying it couldn't copy the upnphost.dll file.

View 2 Replies View Related

Error After System Restoring - Windows Couldn't Complete Installation

Dec 25, 2011

Recently I went to restore my netbook-Acer Aspire One Happy 2. Well I clicked save user data to C: drive, for me a first time user of a netbook...didn't know that if I clicked that and was using a different windows 7 edition from the OEM. That a different windows 7 edition data couldn't be saved. Now, whenever I boot up my netbook, windows will try to install on my computer but gives error:

Error message: Windows couldn't complete installation. To install windows, restart the installation.

System Specifications:
Pre-load: Windows 7 starter
Os using before system restore: Windows 7 Professional
CPU:Intel atom N570 @ 1.66ghz
Graphics card: Intel Gma 3150

View 3 Replies View Related

BSOD Randomly 0x000000124

Mar 8, 2012

Its been happening more and more lately. I just build this pc like 2 weeks ago and i been having the crash since. it always happens after the pc wakes up and randomly, during surfing the web,etc...

View 4 Replies View Related

SSD Needs To Be Replaced

Oct 15, 2011

I finally got my Windows 7 boot/startup/shutdown/readingmail/scanning etc. working as I like and now am getting signs that the solid state drive I'm using for my C disk is recording errors and needs to be RMA'd. I have nothing but Windows files on C: and have a Raid 1 pair of drives as my file library (pictures/docs etc) and a NAS unit as the archive.I am wondering what's the least painful way to swap the C: drive without having to reinstall everything. I have a product called Drive Clone Pro installed that loads at boot time to give an option to restore a partition but I've never used it in that function so am a bit nervous and would appreciate any other options.

View 1 Replies View Related

File Replaced But Not Showing Changes?

Oct 18, 2012

I have edited shell32.dll.mui in en-us in system32 and in syswow64. But I can see any changes. yea I have taken ownership of those files, rebooted and also disabled software protection service and tried but i doesn't show any edited info.

View 1 Replies View Related

System File Replaced But Still Corrupt?

Jul 25, 2012

I had Windows Vista and I upgraded using the 'clean install' to Windows 7. I had been experiencing BSODs (blue screen of death) and I thought a re-install, or an upgrade would solve those issues. However, I continue getting those BSODs now with Windows 7 as well.I can't quite recall the stop errors and names, but they were mostly IRQL_NOT_LESS_OR_EQUAL. I also had 'memory management' sometimes.Recently I powered on my computer and realized everything was running slowly, and I've noticed the BSODs have stopped. I ran everything, anti- malware, virus, spyware programs and they found nothing. I ran memory diagnostics and it came up with nothing. There's nothing really on this computer to be slowing it down since I haven't fully replaced all my files and it's a new OS.The only thing that found anything out of place was after running SFC /scannow, the CBS.log file says this in several places:

[code]...

What I could understand from that is it's saying that a file, called msdrm.dll.mui, is corrupt. Apparently it's in the 'en-US' folder (assuming). It also says on the last line, 'file is missing'.Now, I've replaced from the actual Windows 7 installation CD, the file msdrm.dll.mui in the en-US folder, and in another folder that had the same file. After restarting, the computer still runs sluggishly.My question is, why would the system file still be corrupt even after replacing it from the installation CD? The CD is fine, no scratches or anything like that, and it's virtually new.Also, could my system be missing something that the file msdrm.dll.mui needs to function properly? (I ask this because it says 'file missing') What can I do about this system file to fix it?Note: I looked up the system file msdrm.dll.mui and I read that it's needed for system performance (and performance right now is my issue so I'm guessing this is what's making my computer run slugglishly).

View 3 Replies View Related

Recover A File When Replaced Its Folder?

Aug 13, 2012

you know when you have 2 folders with the same name and the computer asks you if you want to replace it, keep both and such ? well, I did that to a very important folder that was on my external hard drive, now I don't know what to do� is there any way to recover the folder to its version before I replaced it?ps: information - I replaced using a mac OSX Lion, but I can use any softwares for windows since the folder is on my hard drive not on my laptop - also, they were photos, which I edited with photoshop, so maybe there's something I can do in photoshop, maybe? - it wasn't deleted, it was replaced!

View 1 Replies View Related

Icons For Certain Programs Are Getting Replaced With Others In Taskbar?

Jul 29, 2011

Dunno why this is happening but for some reason the programs Quicktime and Adobe Reader are taking on the icon of some other random program in my task bar. I tried uninstalling and reinstalling both but it didn't seem to work.

View 4 Replies View Related

Computer Won't Load Windows 7 Even Though Replaced HDD, RAM,CPU, MB?

Jan 25, 2012

I recently updated my PC and just bougth some different gear, for some reason it just refuses to boot. What happens is when I get to the windows logo loading screen my pc just freezes and reboots. This kept happening so I bought a new HDD and still the same, checked the harddisk to be sure on another pc. Also I recently bought 8 GB DDR3 ram, a P63 B3 Revision Motherboard, I2500K intel core CPU, crossfire with 2x GeForce 9800 GT.

View 8 Replies View Related

How To Undo Replaced Excel File

May 16, 2012

How to undo replaced excel file

View 4 Replies View Related

Laptop Icons Got Replaced With Wordpad?

Sep 6, 2012

After my daughter was using note pad, all icons on my laptop got replaced with wordpad icon and when you click on any of them they just show text describing program that it used to represent. Is there a way to turn it back to normal icons?

View 2 Replies View Related

RAS DLL Couldn't Be Loaded

Jul 26, 2010

I'm running Win 7 Pro 64 bit, FF is primary browser. I have a Verizon FIOS network. I've been getting the following message when I boot up:"The RAS DLL couldn't be loaded. If you don't have a modem installed this is a normal situation. If you use a modem, check that the RASAPI32.DLL is properly installed. Due to this reason, the options related with the modem will not work.This alert can be disabled in the General Options tab." I don't have a modem. Could someone tell me what General Options tab this is referring to so I can disable this alert?

View 4 Replies View Related

Program Icons Replaced By Generic Icon?

Dec 5, 2011

Windows 7, Home Premium edition

I was experimenting with DPI Scaling and changed from 125% to 150%. Didn't like that so returned to 125% and when I returned to the desktop, all of the program icons had a generic icon that appears to be overlaid. Haven't been able to find anything to return the icons to normal.

Looks like this: Would like to go back to the program icons.

View 5 Replies View Related

Rig Crashed Due To A Failed PSU / Replaced With New Corsair AX1200

Oct 22, 2012

Rig crashed due to a failed PSU --> Replaced with new Corsair AX1200 and now the Win 7 Ultimate 64bit is not recognizing the 12 gb Corsair Dominators (shows only 4 gb). I've searched the forums for this issues and the common responses was - to go to BOOT Advanced Options and uncheck the maximum memory. The Dominators are fine because they are detected by CPU ID. The MOBO is only showing 4 gb as well. I tried the 12 gb memory modules in a friends computer and it works fine!

View 3 Replies View Related

Epson 840-Replaced Cartridges And Now It Won't Print Any Color

May 21, 2012

I have an Epson Workforce 840 printer. I replaced the black ink and the cyan with refillable cartridges and reset the cartridges. Everything printed fine. Then a month later, the magenta and yellow were running low so I replaced those cartridges and reset those with the rest of the replacement set I installed earlier that included the black and cyan. I checked the print levels and all of the cartridges are showing as full, both on the printer's display as well as from my computer (I am printing from my Mac Powerbook and my kids' Windows 7 laptops). I then did a nozzle check and a print head check, and now only the black prints out. I try and print a lined/ruled paper from the printer's onboard control panel that should print in cyan and it comes out blank.

View 1 Replies View Related

Norton Internet Security Has Been Replaced With Windows 7

Feb 10, 2013

on 8th Feb 2013, I noticed my norton security pane was missing from its usual place . It was instead replaced with window defender. When I checked norton , it was turned off but turning it on failed. I have never experienced something like this before. I have tried system restore but this has also failed .

View 1 Replies View Related

Windows 7 Couldn't Start Up?

Nov 9, 2012

i recently encountered a problem in my system it says "system couldn't start up properly "and it gives me 2 options "start windows normally and recovery "if i choose recovery it check and said system couldn't auto recover and its asking "do you want to tell Microsoft about it" if i said no the system turns off. again when i turn on and if i click "starts windows normally " it starts as usual

View 2 Replies View Related

Replaced Rj45 Lan Input With A New Lan Card But Runs Very Slowly

Feb 22, 2012

My motherboard is an Asus M3A78-EM and I have been using the system with the built in lan rated at 10/100/1000 mbps. The socket seems to be going bad so I tried replacing it with another internal card. They only had two to choose from at Office Depot were rated at 10/100/ mbps. and the other which was called D-Link DGE 530T which had the same specs as the motherboard so I got it. I've tried more than one cable and it works but is much slower did I buy the wrong thing to be running straight from a Wild Blue modem or, are there some settings that can be changed to speed it up I just run the one computer. D-Link DGE-530T Gigabit Desktop Adapter 10/ 100/ 1000Mbps PCI 1 x RJ45

View 3 Replies View Related

The Publisher Of This Program Couldn't Be Verified

Aug 13, 2011

I'm using Internet Explorer 9 and I've been trying to download a file I need. However, it keeps giving me the message "The publisher of this program couldn't be verified", with options to "Open" the file (which doesn't work because it's an incomplete file; I guess it blocked the download), "Learn more..." which is useless and "Cancel". There's no option to download the file, even though I know I can trust it and it's a file I want.

View 1 Replies View Related

Process Couldn't Be Ignored Any Longer Along With These Specifications

May 26, 2012

I started up my laptop and every now and then I this message saying 'following process doesn't work anymore: ttxgyhtq.exe'. Then, just now, I got this other message saying this process couldn't be ignored any longer along with these specifications: proces-id=0xd00 (3328), thread-id=0x1d90 (7568). Giving me the options to terminate this process or to cancel. This is seriously bugging me as my anti virus couldn't find anything either.

View 2 Replies View Related

Couldn't Finish The Sentence W/o Busting?

Jun 26, 2012

So, is this the typical UBI Shoddy, unoptimized, buggy Game or have they finally turned the corner? Bwahahahahaha... sorry, couldn't finish the sentence w/o busting a gut laughing eriously though, aside from the Third Person View (that I hate with a passion because it makes moving so cumbersome), has anybody played the campaign yet?

View 9 Replies View Related

Couldn't Search Programs And Files

May 19, 2011

I click Start and type but I coundn't search.

View 5 Replies View Related

Windows Couldn't Complete Installation

Jun 9, 2012

i have a problem..my labtop isnt starting up. its constantly telling me that windows couldnt complete the installation. to install windows on this computer, restart the installation.

View 2 Replies View Related

Couldn't Get Past Logon Screen

Jul 12, 2012

I own an Asus F3E series, about 4,5 years old.Yesterday, as I was browsing the web, windows 7 crashed and I restarted the system only to find out that I couldn't get past the logon screen.After several tries which lasted several hours I decided to try system restore using the hidden partition. After I managed to Install vista (at first the installation kept failing on the first restart), I tried logging on.Sometimes it would get past the logon screen BUT after that I only saw a blue screen (not to be confused with bsod). After waiting for some minutes the system restarts.Safe mode won't work. It will crash on loading and will randomly restart or a bsod will come up. So, I can't access my pc in any way.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved