Rig Crashed Due To A Failed PSU / Replaced With New Corsair AX1200
Oct 22, 2012
Rig crashed due to a failed PSU --> Replaced with new Corsair AX1200 and now the Win 7 Ultimate 64bit is not recognizing the 12 gb Corsair Dominators (shows only 4 gb). I've searched the forums for this issues and the common responses was - to go to BOOT Advanced Options and uncheck the maximum memory. The Dominators are fine because they are detected by CPU ID. The MOBO is only showing 4 gb as well. I tried the 12 gb memory modules in a friends computer and it works fine!
View 3 Replies
ADVERTISEMENT
Jul 17, 2012
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies
View Related
Jan 17, 2012
having boot mgr errors 4-6 times a day computer reboots out of the blue have to go into bios re-identify the bootable os drive. have a corsair force 3 120gb SSD. have daily talks with corsair tech support. AHCI is enabled in the bios & MSAHCI is changed from 1 to 0 still get BOOTMGR is missing. i have done windows startup repair no change still get bootmgr. have updated the Firmware on the Corsair SSD. have done everything i can find to do. still get BOOTMGR is missing. asus p6x58d, intel I7-970 3.2ghz windows 7 ultimate SP1.
View 2 Replies
View Related
Aug 12, 2012
I did about 3 format since I bought my ssd. And its getting slower and slower for everytime I format it, I have format it about 2 times not more. and its about 100-200 write speed on it, before it was about 200-300. but its not fast as I expected here comes my bios settings if i have anything wrong there [URL].
View 9 Replies
View Related
Nov 29, 2012
I was looking at Corsair 4GB DDR3 1600mhz Vengeance Memory Module CL9.. It looks great my mother board is a gigabyte 880gm-ud2h I'm currently only running 1333 dims and I was wondering would it be able to run a 2gb corsair value 1333mhz moduel and a vengence 1600mhz?
View 2 Replies
View Related
Jul 25, 2012
I am currently running core i5 2500k @ 4.5GHz at 1.34v and while running intel burn test I reach up to 80C and the idle is around 45-50. My ambient temp is around 23c-25c
As for the H60 it is running how it should at full pump speed so i duno if its just me or the temps are little too high. I tested with a cheap 15 pound heat sink and fan I was getting the same temp so what real advantage is this achieving
View 6 Replies
View Related
Nov 16, 2011
how do I remove Corsair CMX1024-3200C2PT?
View 1 Replies
View Related
Aug 31, 2011
I just got a Corsair 800D case and I am looking for a nice lighting kit for it.
View 4 Replies
View Related
Sep 16, 2011
Quote: Hold on to your seats gaming enthusiasts, Corsair just unleashed an onslaught of Vengeance series peripherals aimed at helping you dominate that Call of Duty marathon... and we got our hands on all of 'em. There's a lot to cover, so we'll get right to it. The K60 gamer keyboard boasts Cherry MX Red interchangeable keys for rapid fire, 20-key rollover, windows key lock and crazy fast reporting rate at 1000 reports per second. Its companion, the M60 mouse, implements an Avago 5670 DPI sensor, adjustable center of gravity, custom lift detection and high-mass scroll wheel. In addition to all that, this bad boy features a dedicated sniper button which allows you to hone in on your target that much faster. Read on for the full rundown on the goods. Read More at : Corsair Vengeance gaming keyboards, mice, and headsets hands-on
View 2 Replies
View Related
Sep 23, 2012
I am trying to install Windows 7 Ultimate x64 on my new Kingston 128GB SSDNow V200 (SV200S37A/128G) and Asus M2N32-Sli Deluxe motherboard.The CPU is an AMD Athlon 64 X2 6400+ and I also have connected a Palit 9500GT graphics card via the primary PCI-E slot, PSU is Enermax 485W.I have the whole setup with a traditional hard drive working just fine in Windows XP Professional 32-Bit with SP3, what I am trying to do is switch over to using the new SSD with a fresh install of Win 7 Ult X64.The problem I am having is freezing/hanging when either on "Expanding WIndows Files" at 80% or usually on "Installing Features", either the cursor won't move or the dots next to "Installing Features" stop moving completely.. and I can just leave it for hours and nothing happens.
I have tried so far including combinations of each of these; Installing from DVD drive Installing from USB drive Installing from USB drive with slipstreamed SP1 Using PS/2 keyboard and mouse Installing with only one stick (2GB) of RAM, or two sticks (4GB) of RAM or four sticks (8GB) of RAM, or different pairs (4GB) of RAM Updated motherboard BIOS to latest beta version Swapped graphics card for another PCI-E card Swapped graphics card for a PCI card Installed on another PC.. worked fine on that PC (previous generation motherboard) then swapped to this machine but when Windows 7 has loaded it reboots the PC.. repair doesn't do anything just runs and runs finding nothing Installed Windows XP Professional 32-Bit with SP3 and all fine.. why won't Windows 7 install? Checked firmware of the SSD which is completely up to date Tried all 6/6 SATA ports Tried 4 different SATA cables Tried the SATA RAID port but no luck as driver won't install on Windows 7 installation due to it being "unsigned" I am very confused because surely if the SSD was incompatible with my motherboard then Windows XP Professional 32-Bit with SP3 wouldn't have installed and been working apparently flawlessly?
View 5 Replies
View Related
Jan 31, 2012
I have a problem with the sound on my board "popping / clicking sound" like when you power on your speakers but it's constantly does that and even when on standby...I will start from the very first day when I built my PC.Well I built my PC from following parts :
Motherboard: ASUS MA578L-M/USB3 PSU: ALPINE 700W
RAM: Corsair XMS3 2x2GB 1600MHz 1.65V
GPU: Gainward nVidia GTX 550Ti 1GB / 192bit Golden Sample (also knows as "GS")
CPU: AMD Phenom II X4 955 Black Edition 3.2GHz / 8MB Cache
HEAT-SINK: Coolermaster Vortex Plus CPU Cooler
DVD driver: Pioneer DVR-S19LBK which is LightScribe as well
HDD: Samsung Spinpoint F1 don't know which model exactly but spec. > 1TB / 7200RPM /3Gbps.
From the very beginning I had Windows XP 32bit (and of course all of my 4gigs didn't worked, and also I've been suffering sound delay eg. you've been shot and you see that but you'll hear it in about 2 seconds, so NOT GOOD) then I went on Windows 7 Ultimate 64bits (note that I haven't got a speakers JUST > HEADPHONES) so it solved the problem with RAM's (I can use all of them properly now) and I am happy with that, but it was annoying to be sitting all the time on the headphones, so I bought "Logitech X-530 5.1 speakers BRAND NEW ones. And the story began from that moment. I started to be hearing weird sounds and the sound takes a half of a second like "popping/clicking or beeping" or I don't know how it would be called like"..So I tried to bring whole motherboard back to the shop where I bought them, left it to them..After a couple of days I'm back and got told like "the thermal paste was on cpu's socket and cpu's pins "SOMEHOW" ?!?!?....got told again that I could choose that "Motherboard would be sent to ASUS supplier to clean the socket", but CPU I needed to clean my self but the guy was not too sure about my cpu's life and will it work properly or I don't know.. So it is sent now "the MOTHERBOARD" but I've been told to wait for it for another 28 days to get it back, but I couldn't wait for that much and I bought another one, exactly the same one I got sent but just BRAND NEW ONE. So brought home, CLEANED CPU TO THE CONDITION AS IT WAS NEW, added a bit of thermal paste on the surface of cpu, inserted everything onto they belonged positions "ABSOLUTELY EVERYTHING AS IT SHOULD BE" = GOT THE SAME POPPING SOUND.....Well then I tried my friend's exactly the same cpu as I have "AMD Phenom II X4 955 Black Edition etc." = SAME POPPING SOUND..So I'm getting to the conclusion that I need to check "THE RAM MODULES" Cause: NEW MOTHERBOARD SAME CPU *friend's one is doing the same popping sounds as my one (I've even tried my cpu on friend's computer and it goes well just 110% well as it should be")
View 2 Replies
View Related
Nov 9, 2012
well at first the screen would freeze, only thing i could do is restart the machine via the switch. Ive updated all the drivers i can, even updated the bios version. But everything i seem to do is making it worse now im having alot of non responsive programme's. Games are freezing up and staying froze for 30+ seconds then work for about 5 minutes and freeze again, sometimes fully stopping
View 1 Replies
View Related
Oct 15, 2011
I finally got my Windows 7 boot/startup/shutdown/readingmail/scanning etc. working as I like and now am getting signs that the solid state drive I'm using for my C disk is recording errors and needs to be RMA'd. I have nothing but Windows files on C: and have a Raid 1 pair of drives as my file library (pictures/docs etc) and a NAS unit as the archive.I am wondering what's the least painful way to swap the C: drive without having to reinstall everything. I have a product called Drive Clone Pro installed that loads at boot time to give an option to restore a partition but I've never used it in that function so am a bit nervous and would appreciate any other options.
View 1 Replies
View Related
Oct 18, 2012
I have edited shell32.dll.mui in en-us in system32 and in syswow64. But I can see any changes. yea I have taken ownership of those files, rebooted and also disabled software protection service and tried but i doesn't show any edited info.
View 1 Replies
View Related
Oct 16, 2012
Motherboard died in a custom arcade machine, Replaced motherboard but of course it will not boot. Anyway i can get the serial key for windows "out" of the hard drive? This is a custom machine with no sticker. Also, if by doing a fresh install, will I lose any data on hard drive?
View 4 Replies
View Related
Jul 25, 2012
I had Windows Vista and I upgraded using the 'clean install' to Windows 7. I had been experiencing BSODs (blue screen of death) and I thought a re-install, or an upgrade would solve those issues. However, I continue getting those BSODs now with Windows 7 as well.I can't quite recall the stop errors and names, but they were mostly IRQL_NOT_LESS_OR_EQUAL. I also had 'memory management' sometimes.Recently I powered on my computer and realized everything was running slowly, and I've noticed the BSODs have stopped. I ran everything, anti- malware, virus, spyware programs and they found nothing. I ran memory diagnostics and it came up with nothing. There's nothing really on this computer to be slowing it down since I haven't fully replaced all my files and it's a new OS.The only thing that found anything out of place was after running SFC /scannow, the CBS.log file says this in several places:
[code]...
What I could understand from that is it's saying that a file, called msdrm.dll.mui, is corrupt. Apparently it's in the 'en-US' folder (assuming). It also says on the last line, 'file is missing'.Now, I've replaced from the actual Windows 7 installation CD, the file msdrm.dll.mui in the en-US folder, and in another folder that had the same file. After restarting, the computer still runs sluggishly.My question is, why would the system file still be corrupt even after replacing it from the installation CD? The CD is fine, no scratches or anything like that, and it's virtually new.Also, could my system be missing something that the file msdrm.dll.mui needs to function properly? (I ask this because it says 'file missing') What can I do about this system file to fix it?Note: I looked up the system file msdrm.dll.mui and I read that it's needed for system performance (and performance right now is my issue so I'm guessing this is what's making my computer run slugglishly).
View 3 Replies
View Related
Aug 13, 2012
you know when you have 2 folders with the same name and the computer asks you if you want to replace it, keep both and such ? well, I did that to a very important folder that was on my external hard drive, now I don't know what to do� is there any way to recover the folder to its version before I replaced it?ps: information - I replaced using a mac OSX Lion, but I can use any softwares for windows since the folder is on my hard drive not on my laptop - also, they were photos, which I edited with photoshop, so maybe there's something I can do in photoshop, maybe? - it wasn't deleted, it was replaced!
View 1 Replies
View Related
Jul 29, 2011
Dunno why this is happening but for some reason the programs Quicktime and Adobe Reader are taking on the icon of some other random program in my task bar. I tried uninstalling and reinstalling both but it didn't seem to work.
View 4 Replies
View Related
Jan 25, 2012
I recently updated my PC and just bougth some different gear, for some reason it just refuses to boot. What happens is when I get to the windows logo loading screen my pc just freezes and reboots. This kept happening so I bought a new HDD and still the same, checked the harddisk to be sure on another pc. Also I recently bought 8 GB DDR3 ram, a P63 B3 Revision Motherboard, I2500K intel core CPU, crossfire with 2x GeForce 9800 GT.
View 8 Replies
View Related
May 16, 2012
How to undo replaced excel file
View 4 Replies
View Related
Sep 6, 2012
After my daughter was using note pad, all icons on my laptop got replaced with wordpad icon and when you click on any of them they just show text describing program that it used to represent. Is there a way to turn it back to normal icons?
View 2 Replies
View Related
Dec 5, 2011
Windows 7, Home Premium edition
I was experimenting with DPI Scaling and changed from 125% to 150%. Didn't like that so returned to 125% and when I returned to the desktop, all of the program icons had a generic icon that appears to be overlaid. Haven't been able to find anything to return the icons to normal.
Looks like this: Would like to go back to the program icons.
View 5 Replies
View Related
May 29, 2012
Recently I have had a load of hardware issues which have caused me to replace my PSU and GPU. After doing so to more powerful units, I went to boot up again and got the error: "BOOTMGR is missing"
I have had this before when I remove my secondary HDD and just try and boot from my primary SSD, but after re-connecting the secondary HDD it would work again (telling me this BOOTMGR is on the HDD, even though the Windows files are on the SSD).
I don't know what to make of this as if I boot from the SSD alone nothing happens and it restarts, and if I connect the HDD and it boots then it goes into the System Recovery and after repairing/restoring still won't work. I think the BIOS settings are correct, with the SATA drives set to AHCI (as I'm 99% sure they were before).
My PC specs are:
Intel i7 980X
Intel DX58SO Motherboard
128GB OCZ Vertex 3 SSD
2TB WD HDD (secondary)
Radeon 7850 2GB GFX
8GB DDR3 RAM
Windows 7 Ultimate
View 1 Replies
View Related
Sep 19, 2012
My PC recently would not boot up. Even in repair it would freeze, reinstalling windows did not help and eventually anything I loaded whether repair, setup of windows or straight boot into the OS would result in a BSOD error. I replaced HD and was able to boot in finally and reinstall windows.Everything was fine then I got one new BSOD which was 0x000000124 and my PC rebooted. I googled this and it showed general hardware failure but I can not identify the issue.I ran Hard drive test even though I just replaced it, no problems, ran memtest over night and got 8 passes with no errors.
View 1 Replies
View Related
May 21, 2012
I have an Epson Workforce 840 printer. I replaced the black ink and the cyan with refillable cartridges and reset the cartridges. Everything printed fine. Then a month later, the magenta and yellow were running low so I replaced those cartridges and reset those with the rest of the replacement set I installed earlier that included the black and cyan. I checked the print levels and all of the cartridges are showing as full, both on the printer's display as well as from my computer (I am printing from my Mac Powerbook and my kids' Windows 7 laptops). I then did a nozzle check and a print head check, and now only the black prints out. I try and print a lined/ruled paper from the printer's onboard control panel that should print in cyan and it comes out blank.
View 1 Replies
View Related
Feb 10, 2013
on 8th Feb 2013, I noticed my norton security pane was missing from its usual place . It was instead replaced with window defender. When I checked norton , it was turned off but turning it on failed. I have never experienced something like this before. I have tried system restore but this has also failed .
View 1 Replies
View Related
Feb 22, 2012
My motherboard is an Asus M3A78-EM and I have been using the system with the built in lan rated at 10/100/1000 mbps. The socket seems to be going bad so I tried replacing it with another internal card. They only had two to choose from at Office Depot were rated at 10/100/ mbps. and the other which was called D-Link DGE 530T which had the same specs as the motherboard so I got it. I've tried more than one cable and it works but is much slower did I buy the wrong thing to be running straight from a Wild Blue modem or, are there some settings that can be changed to speed it up I just run the one computer. D-Link DGE-530T Gigabit Desktop Adapter 10/ 100/ 1000Mbps PCI 1 x RJ45
View 3 Replies
View Related
Oct 1, 2010
I just downloaded MS Office 2010. Now, all the office icons - Excel, PowerPoint etc ..... and all the icons in Start menu and my desktop such as Norton 360, iTunes, Quicktime Player, Calculator etc. show up as the Microsoft Word icon.
In other words all the original icons are missing and the only icon I see - for all software programs is Microsoft Word.
I had a virus on my laptop a few weeks ago and I deleted a folder... or something ... but I'm not sure what it was. what I deleted and how I can get it back?
View 9 Replies
View Related
Dec 31, 2012
I took out my wireless card to clean off the extra dust, when I replaced it back into my mother board I found that I no longer receive signal from my Graphic's card to my monitor. I also noticed that during my computers normal booting up process there was no "beep" like the computer normally gives as to loads windows 7.
So when I turn on my pc my monitor says there is no signal. My monitor is hooked up to my graphics card instead of the mother board. (I have yet to find the cord that plugs into the mother board, I've misplaced it.) When I boot the system up the fan runs and it makes every noise it should except the beep just before loading the OS.
View 6 Replies
View Related
Feb 14, 2012
Basically, my HP DV6-3065EA running Windows 7 Home Premium (x64) laptop died. I went into a computer shop and asked how much a simple diagnostic test would be to find out how much a repair would be. He quoted me 90. Phew, jog on! That wasn't going to happen!Anyway, I decided to replace the power jack. No hard job, just a simple unplug and plug back in job. (looks abit like this Hp power jack image by chikyeung on Photobucket). I replaced it; everything is running fine. I tried to put a USB pen drive into a usb socket. Didn't work. Tried another, didn't work. I have tried several devices and they all work on other computers but don't seem to be working on mine. I have been trawling the internet for answers, and as of yet, nothing -.-! I wouldn't call myself a novice, trust me, I've tried everything, uninstalling and reinstalling all of the USB drivers, checking bits of the registry.etc. Nothing. So today, i thought, right, WIPE THE COMPUTER! I backed up everything, went back to scratch.
View 2 Replies
View Related
Sep 10, 2012
My existing dual boot winxp/Windows 7 mirrored configuration appears to have issues. I ordered a SSD hd today from newegg. Question: new install, or just re-image the SSD? If I do new install, do I have to have a authorization from Microsoft? I purchased this Windows 7 Professional 2 years ago...
View 1 Replies
View Related
