Windows 7 Boot Mgr On Corsair SSD?
Jan 17, 2012
having boot mgr errors 4-6 times a day computer reboots out of the blue have to go into bios re-identify the bootable os drive. have a corsair force 3 120gb SSD. have daily talks with corsair tech support. AHCI is enabled in the bios & MSAHCI is changed from 1 to 0 still get BOOTMGR is missing. i have done windows startup repair no change still get bootmgr. have updated the Firmware on the Corsair SSD. have done everything i can find to do. still get BOOTMGR is missing. asus p6x58d, intel I7-970 3.2ghz windows 7 ultimate SP1.
View 2 Replies
ADVERTISEMENT
Sep 23, 2012
I am trying to install Windows 7 Ultimate x64 on my new Kingston 128GB SSDNow V200 (SV200S37A/128G) and Asus M2N32-Sli Deluxe motherboard.The CPU is an AMD Athlon 64 X2 6400+ and I also have connected a Palit 9500GT graphics card via the primary PCI-E slot, PSU is Enermax 485W.I have the whole setup with a traditional hard drive working just fine in Windows XP Professional 32-Bit with SP3, what I am trying to do is switch over to using the new SSD with a fresh install of Win 7 Ult X64.The problem I am having is freezing/hanging when either on "Expanding WIndows Files" at 80% or usually on "Installing Features", either the cursor won't move or the dots next to "Installing Features" stop moving completely.. and I can just leave it for hours and nothing happens.
I have tried so far including combinations of each of these; Installing from DVD drive Installing from USB drive Installing from USB drive with slipstreamed SP1 Using PS/2 keyboard and mouse Installing with only one stick (2GB) of RAM, or two sticks (4GB) of RAM or four sticks (8GB) of RAM, or different pairs (4GB) of RAM Updated motherboard BIOS to latest beta version Swapped graphics card for another PCI-E card Swapped graphics card for a PCI card Installed on another PC.. worked fine on that PC (previous generation motherboard) then swapped to this machine but when Windows 7 has loaded it reboots the PC.. repair doesn't do anything just runs and runs finding nothing Installed Windows XP Professional 32-Bit with SP3 and all fine.. why won't Windows 7 install? Checked firmware of the SSD which is completely up to date Tried all 6/6 SATA ports Tried 4 different SATA cables Tried the SATA RAID port but no luck as driver won't install on Windows 7 installation due to it being "unsigned" I am very confused because surely if the SSD was incompatible with my motherboard then Windows XP Professional 32-Bit with SP3 wouldn't have installed and been working apparently flawlessly?
View 5 Replies
View Related
Aug 12, 2012
I did about 3 format since I bought my ssd. And its getting slower and slower for everytime I format it, I have format it about 2 times not more. and its about 100-200 write speed on it, before it was about 200-300. but its not fast as I expected here comes my bios settings if i have anything wrong there [URL].
View 9 Replies
View Related
Nov 29, 2012
I was looking at Corsair 4GB DDR3 1600mhz Vengeance Memory Module CL9.. It looks great my mother board is a gigabyte 880gm-ud2h I'm currently only running 1333 dims and I was wondering would it be able to run a 2gb corsair value 1333mhz moduel and a vengence 1600mhz?
View 2 Replies
View Related
Jul 25, 2012
I am currently running core i5 2500k @ 4.5GHz at 1.34v and while running intel burn test I reach up to 80C and the idle is around 45-50. My ambient temp is around 23c-25c
As for the H60 it is running how it should at full pump speed so i duno if its just me or the temps are little too high. I tested with a cheap 15 pound heat sink and fan I was getting the same temp so what real advantage is this achieving
View 6 Replies
View Related
Nov 16, 2011
how do I remove Corsair CMX1024-3200C2PT?
View 1 Replies
View Related
Oct 22, 2012
Rig crashed due to a failed PSU --> Replaced with new Corsair AX1200 and now the Win 7 Ultimate 64bit is not recognizing the 12 gb Corsair Dominators (shows only 4 gb). I've searched the forums for this issues and the common responses was - to go to BOOT Advanced Options and uncheck the maximum memory. The Dominators are fine because they are detected by CPU ID. The MOBO is only showing 4 gb as well. I tried the 12 gb memory modules in a friends computer and it works fine!
View 3 Replies
View Related
Aug 31, 2011
I just got a Corsair 800D case and I am looking for a nice lighting kit for it.
View 4 Replies
View Related
Sep 16, 2011
Quote: Hold on to your seats gaming enthusiasts, Corsair just unleashed an onslaught of Vengeance series peripherals aimed at helping you dominate that Call of Duty marathon... and we got our hands on all of 'em. There's a lot to cover, so we'll get right to it. The K60 gamer keyboard boasts Cherry MX Red interchangeable keys for rapid fire, 20-key rollover, windows key lock and crazy fast reporting rate at 1000 reports per second. Its companion, the M60 mouse, implements an Avago 5670 DPI sensor, adjustable center of gravity, custom lift detection and high-mass scroll wheel. In addition to all that, this bad boy features a dedicated sniper button which allows you to hone in on your target that much faster. Read on for the full rundown on the goods. Read More at : Corsair Vengeance gaming keyboards, mice, and headsets hands-on
View 2 Replies
View Related
Jan 31, 2012
I have a problem with the sound on my board "popping / clicking sound" like when you power on your speakers but it's constantly does that and even when on standby...I will start from the very first day when I built my PC.Well I built my PC from following parts :
Motherboard: ASUS MA578L-M/USB3 PSU: ALPINE 700W
RAM: Corsair XMS3 2x2GB 1600MHz 1.65V
GPU: Gainward nVidia GTX 550Ti 1GB / 192bit Golden Sample (also knows as "GS")
CPU: AMD Phenom II X4 955 Black Edition 3.2GHz / 8MB Cache
HEAT-SINK: Coolermaster Vortex Plus CPU Cooler
DVD driver: Pioneer DVR-S19LBK which is LightScribe as well
HDD: Samsung Spinpoint F1 don't know which model exactly but spec. > 1TB / 7200RPM /3Gbps.
From the very beginning I had Windows XP 32bit (and of course all of my 4gigs didn't worked, and also I've been suffering sound delay eg. you've been shot and you see that but you'll hear it in about 2 seconds, so NOT GOOD) then I went on Windows 7 Ultimate 64bits (note that I haven't got a speakers JUST > HEADPHONES) so it solved the problem with RAM's (I can use all of them properly now) and I am happy with that, but it was annoying to be sitting all the time on the headphones, so I bought "Logitech X-530 5.1 speakers BRAND NEW ones. And the story began from that moment. I started to be hearing weird sounds and the sound takes a half of a second like "popping/clicking or beeping" or I don't know how it would be called like"..So I tried to bring whole motherboard back to the shop where I bought them, left it to them..After a couple of days I'm back and got told like "the thermal paste was on cpu's socket and cpu's pins "SOMEHOW" ?!?!?....got told again that I could choose that "Motherboard would be sent to ASUS supplier to clean the socket", but CPU I needed to clean my self but the guy was not too sure about my cpu's life and will it work properly or I don't know.. So it is sent now "the MOTHERBOARD" but I've been told to wait for it for another 28 days to get it back, but I couldn't wait for that much and I bought another one, exactly the same one I got sent but just BRAND NEW ONE. So brought home, CLEANED CPU TO THE CONDITION AS IT WAS NEW, added a bit of thermal paste on the surface of cpu, inserted everything onto they belonged positions "ABSOLUTELY EVERYTHING AS IT SHOULD BE" = GOT THE SAME POPPING SOUND.....Well then I tried my friend's exactly the same cpu as I have "AMD Phenom II X4 955 Black Edition etc." = SAME POPPING SOUND..So I'm getting to the conclusion that I need to check "THE RAM MODULES" Cause: NEW MOTHERBOARD SAME CPU *friend's one is doing the same popping sounds as my one (I've even tried my cpu on friend's computer and it goes well just 110% well as it should be")
View 2 Replies
View Related
Nov 9, 2012
well at first the screen would freeze, only thing i could do is restart the machine via the switch. Ive updated all the drivers i can, even updated the bios version. But everything i seem to do is making it worse now im having alot of non responsive programme's. Games are freezing up and staying froze for 30+ seconds then work for about 5 minutes and freeze again, sometimes fully stopping
View 1 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
Mar 26, 2011
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
View 4 Replies
View Related
Jul 22, 2012
My Windows 7 has stopped booting after a restart, the system would just endlessly play the boot animation and not boot properly... system restore won't work, startup repair won't work, chdsk and sfc won't work. I have yet to try and see whether a Registry fix works. Windows loads the WRE VERY slowly.
View 1 Replies
View Related
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Oct 14, 2009
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies
View Related
Aug 8, 2012
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies
View Related
Aug 23, 2012
I have a Boot Camped Mac Mini with Windows 7. I recently needed to allocate more disk space to it as i only had a gig left, i booted into MacOS and used Disk Utility to make the Mac partition smaller, i rebooted into windows and downloaded software called 'Partition Wizard' from www.partitionwizard.com. I dragged the Windows partition all the way so that it used up all the Unallocated Space, it required a reboot to finsih and when it did it displayed an error such as thistatus:0xc0000255Info: The Windows Boot Configuration Data file is missing required informationI have the Installation Disk and i have tried repairing more than 3 times and it seemed to do nothing, so i tried using the CMD and bootrec.exe and now when i start the repair wizard it says there is no windows partition yet i can still try repairing things (Yet still does not repair anything). I downloaded EasyBCD but im on my Mac partition right now and its an exe, i have no clue how to run that within windows to try and repair the Bootloader. I do however have access to the BOOTCAMP partition through the mac side, and i can access all the files. Is there some way i can repair the bootloader through this?
View 6 Replies
View Related
Dec 29, 2011
WIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode.
View 2 Replies
View Related
Apr 6, 2012
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies
View Related
May 1, 2012
whenever I turn on the laptop, it seems to boot into Windows 7, in that the "Starting Windows" text appears and the little animation of colors forming the logo shows, but as some point it fails. This message appears on screen:autocheck not found - skipping AUTOCHECK After a few seconds a BSOD shows up, but too fast for me to make out what it says. It used to, but after some hasty fix attempts no longer does, cycle around to a menu that informed me of this error:Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. Here's the longer history:As some point in the past I decided to try out dual-booting Windows 7 and Linux on the laptop. I got it to a state where this worked fine. I had partitions roughly as follows:[Ubuntu][Windows 7]([Data and files][Boot]) The parentheses denote a logical partition. The Boot partition was very small and only held what was necessary to launch GRUB. This week, I realized that I hardly ever used the Linux partition and decided to get rid of it to reclaim storage space. This is where the trouble begins. I rebooted into a thumb drive that could run GParted and modified the hard drive layout in the following steps: Delete the Ubuntu partition Delete the Boot partition Grow the Data/Files partition to take up the space left by Boot Shrink the Windows 7 partition to make it faster to move Move the Windows 7 partition to the front of the volume Expand it to take up the remaining space. What I ended up with was: [Windows 7]([Data and files]) My naive and fatal mistake was to trust that the Windows Repair CD could fix any boot issues, and also that there would be no catastrophic hardware failures. Both of these assumptions turned out to be false.
First, the laptop's CD/DVD drive has either broken or is too unreliable to use. I have noticed it becoming more and more unstable over time, but now (when I need it most!) it simply does not seem to want to spin up and function at all. This forced me to create a Windows Repair USB drive. However, I can't load any installation media. This is because the laptop did not come with an install DVD. It had a recovery sector, which I cannibalized for the Linux partition. I did copy the stock recovery stuff to a series of DVDs, but, well...This is all to say that any solution that requires a DVD drive is straight out until I can replace it, which I'd like to consider a last resort.My expectations for the Windows Repair CD/USB have been dashed. Attempting to automatically fix boot issues either fails for some specific reason (I can probably reproduce it and provide the details, if necessary), with a dialog to send a report, or fails because it cannot detect any problems. I have tried a variety of things based on my own research to fix this through the command prompt: Running chkdsk /x /r on all drives. Does not find any errors. Running various bootrec commands: /fixmbr, /fixboot, /rebuildbcd, /scanos. All complete successfully, but the last 2 report finding 0 Windows installations. Using bcdboot and bootsect to recreate the bootloader. Again, no errors result, but it does not fix the issue. I guess it should have been obvious that none of the boot record fixes would matter, since the laptop does boot into Windows 7, briefly.
View 3 Replies
View Related
Dec 27, 2012
Today when I was surfing on my laptop (G74S Series) I wanted to restart the laptop because the internet crashed and it usually helps to restart. But I restarted it holding down the power button thing.So, I restarted it and while I was waiting, staring in to the screen, the blinking "_" thing when you start up was doing that for a while and nothing was happening, and a couple of seconds later the computer tells me that it can't boot the laptop/pc because no drive was found. I saw an error code but I didn't catch it, but it was something like "0x0000".So then on later, it sent me in to "Image Restore" But I have no image to restore with, so I cancel it, and then it sends me into the menu where. I can choose to "Restore Computer" or "Scan for startup errors" or something like that (I don't really have a such accurate memory.)And on the top it also says "os unknown on (unknown) local disk".Everytime I start the computer it sends me to that menu where I can choose to restore my computer etc..And I can't really do much about it since I don't have the windows 7 disc/dvd thing either.And this all came all so sudden I don't really know what to do.I don't have any backu or anything, and windows can only detect my /D: drive and not /C:, and I have my OS on /C/
View 2 Replies
View Related
Dec 3, 2010
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies
View Related
Mar 11, 2009
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies
View Related
Aug 1, 2012
I have an Asrock Extreme6 Z77 motherboard, and of course it comes with their signature Instant Boot.I have a Crucial m4 so booting wasn't an issue but I enabled it anyway to test it out. It didn't really do anything so I disabled and uninstalled it. However, now when I reboot there is no Windows loading screen, it just goes black after the Mobo splash screen and then shows the Windows login.This isn't a huge deal but I can't seem to figure out why this is happening. When the screen goes black, my USB keyboard and mouse go off too (the back-lights go off). I don't know if this has anything to do with anything but I thought I would mention it.Also, in msconfig the option for No Boot GUI is not checked.
View 3 Replies
View Related
Jan 13, 2013
ihave windows 8 my lpatop is acer aspire E1-531, I am trying to install windows 7 but boot manager wont show me dvd boot !! it show me only network boot what can i do to be able to boot from dvd
View 2 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
Dec 1, 2012
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies
View Related
Oct 25, 2011
I recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
View 2 Replies
View Related
Nov 24, 2011
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies
View Related
Aug 6, 2012
I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies
View Related
