RAS DLL Couldn't Be Loaded
Jul 26, 2010
I'm running Win 7 Pro 64 bit, FF is primary browser. I have a Verizon FIOS network. I've been getting the following message when I boot up:"The RAS DLL couldn't be loaded. If you don't have a modem installed this is a normal situation. If you use a modem, check that the RASAPI32.DLL is properly installed. Due to this reason, the options related with the modem will not work.This alert can be disabled in the General Options tab." I don't have a modem. Could someone tell me what General Options tab this is referring to so I can disable this alert?
View 4 Replies
ADVERTISEMENT
Aug 13, 2012
All of a sudden my computer after 1 hour freezes and crashes completely.I get a black screen of death with error code 0xc000000e Recovery Screen After i hit enter i got another message saying Your PC needs to be repaired. The application or operating system couldnt be loaded because a required file is missing or contains errors. File: Windowssystem32winload.exe Error code: 0cx000000e After the error happens and I restart, the main hard drive will not show up and I have to restart again for it to show up.SO i just went ahead and formatted the PC and reinstalled windows 7 from scratch.After an hour or less the same thing happened again and also when I reboot the computer asks me to choose which windows 7 I want to log into. Why is this showing up if I formatted the disc completely (Deleted and created New disc while i was reinstalling windows 7)My main drive is a Crucial m4 SDD 2.5 128GB Sata I have 4 other drives with over 2tb each but i use this for files. Windows is installed on just the crucial HD?
View 9 Replies
View Related
Nov 9, 2012
i recently encountered a problem in my system it says "system couldn't start up properly "and it gives me 2 options "start windows normally and recovery "if i choose recovery it check and said system couldn't auto recover and its asking "do you want to tell Microsoft about it" if i said no the system turns off. again when i turn on and if i click "starts windows normally " it starts as usual
View 2 Replies
View Related
Feb 28, 2012
a friend of mine asked me to look at his laptop the other day.It had stopped booting to windows.No OS detected, couldn't boot from HDD, still detected in the BIOS however. It's on a laptop which has 2 IDE connections so I switched the drive to the other and changed the boot order, same problem. The disk was essentially full and he was after a new one so I suggested now could be the time. Anyway the new HDD arrived today, got hold of a copy a Windows 7 and installed it, laptop now boots fine into the new copy of windows, everything is running OK but he needs data off the old HD. I thought the new OS would be able to access it but it isnt recognised in my computer. It is still recognised as the secondary drive in the BIOS and in windows drive management but cannot access it.Drive management can see it and says the device is working properly but it wont initialize, wont turn offline and any access attempt comes up as an I/O error.It has win7 and all his data on so formatting to just save the hard drive for storage isnt an option (just yet).
View 1 Replies
View Related
Aug 13, 2011
I'm using Internet Explorer 9 and I've been trying to download a file I need. However, it keeps giving me the message "The publisher of this program couldn't be verified", with options to "Open" the file (which doesn't work because it's an incomplete file; I guess it blocked the download), "Learn more..." which is useless and "Cancel". There's no option to download the file, even though I know I can trust it and it's a file I want.
View 1 Replies
View Related
May 26, 2012
I started up my laptop and every now and then I this message saying 'following process doesn't work anymore: ttxgyhtq.exe'. Then, just now, I got this other message saying this process couldn't be ignored any longer along with these specifications: proces-id=0xd00 (3328), thread-id=0x1d90 (7568). Giving me the options to terminate this process or to cancel. This is seriously bugging me as my anti virus couldn't find anything either.
View 2 Replies
View Related
Jun 26, 2012
So, is this the typical UBI Shoddy, unoptimized, buggy Game or have they finally turned the corner? Bwahahahahaha... sorry, couldn't finish the sentence w/o busting a gut laughing eriously though, aside from the Third Person View (that I hate with a passion because it makes moving so cumbersome), has anybody played the campaign yet?
View 9 Replies
View Related
May 19, 2011
I click Start and type but I coundn't search.
View 5 Replies
View Related
Jun 9, 2012
i have a problem..my labtop isnt starting up. its constantly telling me that windows couldnt complete the installation. to install windows on this computer, restart the installation.
View 2 Replies
View Related
Jul 12, 2012
I own an Asus F3E series, about 4,5 years old.Yesterday, as I was browsing the web, windows 7 crashed and I restarted the system only to find out that I couldn't get past the logon screen.After several tries which lasted several hours I decided to try system restore using the hidden partition. After I managed to Install vista (at first the installation kept failing on the first restart), I tried logging on.Sometimes it would get past the logon screen BUT after that I only saw a blue screen (not to be confused with bsod). After waiting for some minutes the system restarts.Safe mode won't work. It will crash on loading and will randomly restart or a bsod will come up. So, I can't access my pc in any way.
View 4 Replies
View Related
Nov 30, 2009
I have few XP Pro PCs and a windows 7 Pro x64. The XP PCs can see and access the shared Windows 7 but the Windows 7 couldn't. Windows 7 can see the XPs but when i click on the XPPCs it said Windows Can't Access XP-pc. I click the Detail and it said Network Path Wasn't found. I tried to Diagnostics and it couldn't find the problem. It looks like firewall blocked to me but i disabled windows firewall and security center from windows services. XPPCs don't have any firewall. from Windows 7 i can ping those XPs. I enabled most of the services related to the network.
From the windows7 can't open the its shared folders either. it said the network path was not fould
Is there any one has the same problem?
View 4 Replies
View Related
May 24, 2009
As some around here, I have a problem and hope that you might help me.
I installed Windows virtual machine, Virtual XP with virtualization activated in BIOS and when I launch it, I get the message:
"Virtual XP couldn't be started. Activate Virtualization in BIOS and try again"
any ideas?
View 6 Replies
View Related
Jun 24, 2012
today my desktop couldn't connect to the internet even i tried to restart my router and cable modem for about 5 times. I'm sure i have internet because my sister's laptop still able connect to the internet. When i check my connection, it said " Local Area Connection doesn't have a valid IP configuration. My desktop is using window 7 and i think it just did some update before i shut it down last night.
View 5 Replies
View Related
Dec 24, 2012
my niece was telling me her dell was not working right so I decided to just do a clean factory restore as a scan with malware bytes revealed over 30 viruses/trojans! Someones gonna get a sit down to talk about her surfing habits but I digress. I figure at this point a clean restore is easier than trying to remove these viruses.
So I go to do the normal F8, repair my computer step and see that the repair my computer function doesn't work. Ok let me boot to windows 7 disk and select the repair option and use that for factory restore. Again nothing, usually Dell datasafe options will allow me to do this. I then notice that the recovery partition was not showing up.
I called her and asked and it seems my sisters so called boyfriends fancies himself a "computer expert" and last time they were having problems decided to just reinstall windows which I assume some how lost the connection to the recovery partition.
I installed EaseUS free partition manager and see that the Recovery partition is still there just not accessible. Is there a way I can make this partition bootable again so that i can assess it from the repair menu and possible repair this back to factory?
also if I go like im going to reinstall windows when it says in what partition you want to install windows I can also see the recovery partition.
View 1 Replies
View Related
May 13, 2012
i couldn't use SYSTEM RESTORE for a long time as an error pops up every time saying "System restore encountered an error (0x81000203)" . Because of this problem i couldn't create any restore points in Windows 7 and my system is desperately in need of a restoration.
View 4 Replies
View Related
Sep 19, 2012
My PC recently would not boot up. Even in repair it would freeze, reinstalling windows did not help and eventually anything I loaded whether repair, setup of windows or straight boot into the OS would result in a BSOD error. I replaced HD and was able to boot in finally and reinstall windows.Everything was fine then I got one new BSOD which was 0x000000124 and my PC rebooted. I googled this and it showed general hardware failure but I can not identify the issue.I ran Hard drive test even though I just replaced it, no problems, ran memtest over night and got 8 passes with no errors.
View 1 Replies
View Related
Aug 19, 2012
I have a laptop computer that indicates it is part of a homegroup. I would like to leave the homegroup but I get the error message "Windows couldn't remove your computer from the homegroup." The homegroup was started on my desktop and I changed the password. I expected the laptop to detect that the password had been changed but it didn't. So I tried to leave the homegroup to rejoin with the new password but I'm not allowed to leave.
View 3 Replies
View Related
Aug 23, 2012
We have 2 computers mine works fine, but my brothers is not able to connect to the internet with any program even though his wireless activity shows excellent.I have scanned with avast and malwarebytes, nothing is found.I have tried pinging google.com and it worksThe only thing that shows up when troubleshooting is "Remote device or resource wont allow access to connection"
View 7 Replies
View Related
Mar 13, 2012
I recently built a pc and all is well. Clean install of Windows 7 HP 64. For the first couple of days I was in and out of the system as the default admin (user you are asked to create during Windows 7 install). It wad during this time I installed macrium reflect free 5. I images the system after getting all the drivers in and then set up a scheduled backup for 7am each day. Worked fine.
Now I have created a normal user for me without admin privilege (for security reasons) which will be my day to day login. However this morning macrium failed to run the scheduled image. I was logged in as me, the low lvl user, not admin. The log file had an error about being unable to access adminxml file
I'm guessing this is because I installed macrium whilst an admin? Additionally I created the xml file whilst admin and then turned it into a schedlue whilst admin. However the xml and schedule are both set to run as admin with the admin password typed in.
Macrium is available to me as a normal user but when I launch it I'm asked for the admin password. Just trying to give as much info as poss.
View 8 Replies
View Related
Jul 18, 2012
I reformatted my comptuer about...2 months ago roughly, which i would think would reset the computers setting so i wouldn't be in a home group but reguardless i can't leave the homegroup that i'm in. i can't view homegorup password which makes me belive i'm not actually -IN- a homegroup but my computer THINKS it is. i've tried deleting the idstore.sst file and replaced it with the trouble shoot thingy but that didn't work.. If there is a way to completely reset the HG feature that would be great, or replace a file to kick em out of the home group or something.
View 3 Replies
View Related
Oct 6, 2011
i have wondows XP and i went to update to SP3 and i got an error saying it couldn't copy the upnphost.dll file.
View 2 Replies
View Related
Jan 5, 2010
I did some checks and my processor couldn't run XPmode. (Intel Core 2 Duo 2.13ghz) So I installed it in Virtualbox along with the guest additions. Works Great!
View 2 Replies
View Related
Jan 4, 2012
I couldn't delete a file named autorun.inf even i can't format it. so i can't install new xp os over older OS.
View 1 Replies
View Related
Apr 1, 2012
A few days ago I was trying to copy a file to a usb drive and the computer froze. I couldn't access Task Manager and had to reboot to free everything up. Later when I tried to click on a game icon to open the program the computer froze up again and I had to reboot again. This has now happened several times over a few days. I have tried to find a solution but at at my wits end. I even tried system restore, but found there was nothing to restore, although I had created restore points in the past. I even tried installing an image of the system and other files, but that didn't work. Although I know a little about computers I am a novice at these sorts of problems.
View 6 Replies
View Related
Apr 1, 2011
have an older dv camera (JVC GR-DVL820EA) and would like to run it on py dual core pc with windows 7 professional. I installed my video editing software and a new firewire card and when booted it up said it couldn't install driver. Later on it said that this version of windows doesn't support firewire.
View 1 Replies
View Related
Aug 15, 2011
i couldn't get the windows media player to open and to play. how do i get it to work? i also have a problem with the "Devices with Removable Storage' Icons Missing"
View 1 Replies
View Related
Dec 25, 2011
Recently I went to restore my netbook-Acer Aspire One Happy 2. Well I clicked save user data to C: drive, for me a first time user of a netbook...didn't know that if I clicked that and was using a different windows 7 edition from the OEM. That a different windows 7 edition data couldn't be saved. Now, whenever I boot up my netbook, windows will try to install on my computer but gives error:
Error message: Windows couldn't complete installation. To install windows, restart the installation.
System Specifications:
Pre-load: Windows 7 starter
Os using before system restore: Windows 7 Professional
CPU:Intel atom N570 @ 1.66ghz
Graphics card: Intel Gma 3150
View 3 Replies
View Related
Aug 8, 2011
I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I opened the setup log file(setuperr.log), it shows the error "Couldn't find boot disk on the BIOS based computer". Have anyone got this error before
View 9 Replies
View Related
Jan 12, 2013
i couldn't find dell n5050 laptop webcam driver
View 1 Replies
View Related
Jan 21, 2011
I have a Dell laptop with windows 7 OS 64-bit. The problem is that for the last 2 days i have found it impossible to install anything on it as an error keeps popping up saying MSCORWKS.DLL COULD NOT BE LOADED. I have a lot of important files on my system and i don't want to loose them. how to restoring my system to a previous date say like 2 weeks ago as the system restore only allows me to go back 2 days.
View 9 Replies
View Related
Feb 6, 2013
I had to restore my computer. After I did so and it went through the new setup, I supplied a new password. When I went to logon, it accepted my password but then at the next screen, iit read:The User Service service [sic] failed the logon. User profile cannot be loaded.
View 1 Replies
View Related
