Couldn't Boot From HDD / Still Detected In BIOS However
Feb 28, 2012
a friend of mine asked me to look at his laptop the other day.It had stopped booting to windows.No OS detected, couldn't boot from HDD, still detected in the BIOS however. It's on a laptop which has 2 IDE connections so I switched the drive to the other and changed the boot order, same problem. The disk was essentially full and he was after a new one so I suggested now could be the time. Anyway the new HDD arrived today, got hold of a copy a Windows 7 and installed it, laptop now boots fine into the new copy of windows, everything is running OK but he needs data off the old HD. I thought the new OS would be able to access it but it isnt recognised in my computer. It is still recognised as the secondary drive in the BIOS and in windows drive management but cannot access it.Drive management can see it and says the device is working properly but it wont initialize, wont turn offline and any access attempt comes up as an I/O error.It has win7 and all his data on so formatting to just save the hard drive for storage isnt an option (just yet).
View 1 Replies
ADVERTISEMENT
Nov 7, 2010
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies
View Related
Apr 30, 2012
My hard drive, a WD Scorpio 200GB, is not being detected in bios. AHCI mode is enabled. When I go into the Advanced BIOS Features, all the master and slave configs are none; however, my SSD is recognized as I am on my computer right now using it. I tried every SATA Port, EVEN THE SATA PORT MY SSD IS INSTALLED ON, and it doesn't work; I tried 2 different cables and still no recognition; I tried 4 different hard drives and still no recognition, so it is not a problem with my motherboard, hard drives, or cables. What should I do? I have been trying to figure this out for 4 hours.
View 7 Replies
View Related
Sep 19, 2012
My PC recently would not boot up. Even in repair it would freeze, reinstalling windows did not help and eventually anything I loaded whether repair, setup of windows or straight boot into the OS would result in a BSOD error. I replaced HD and was able to boot in finally and reinstall windows.Everything was fine then I got one new BSOD which was 0x000000124 and my PC rebooted. I googled this and it showed general hardware failure but I can not identify the issue.I ran Hard drive test even though I just replaced it, no problems, ran memtest over night and got 8 passes with no errors.
View 1 Replies
View Related
Mar 30, 2012
When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
View 1 Replies
View Related
Aug 27, 2011
I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
View 29 Replies
View Related
Mar 2, 2012
Just after I upgraded my BIOS, I enjoyed a constant black screen after the BIOS Screen, which said something like CTRL + ALT + DELETE to reboot. It was no longer detecting something. So I removed the second HD and I was able to boot windows.
During the next boot I did the trick to connect the hard drive to the mobo during the Windows loading screen. And the HD became recognized, I was able to use it normally. In the next boot I left the hard rive connected and it wasn't detected by BIOS or Windows. I tried several cable combinations to see if there's a faulty one but no avail.
The weird part is that this drive does not emit any particular sound and most of faulty drives make noises. Another strange thing is that with the power supply connected the hard drive gets hot, really hot, like it's doing something...
Maybe I should downgrade the BIOS if I can. What do you think?
MOBO: Asrock 4g1m VS3.
PSU: 600W generic.
Western Digital Caviar Green 1 TB SATA (Like 5 months old)
View 5 Replies
View Related
Aug 8, 2011
I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I opened the setup log file(setuperr.log), it shows the error "Couldn't find boot disk on the BIOS based computer". Have anyone got this error before
View 9 Replies
View Related
Apr 13, 2012
Lots of BSOD, lock ups, hard drive not being detected by bios, is it failing? Let me start by saying my PC is custom built, most parts are only a year old. The oldest parts are the harddrive (about 5 years) and the soundcard (about 7 years). I have never had major problems until now (a year after building it).
It all started with a blue screen.
KERNEL_DATA_INPAGE_ERROR
Reboot windows and it seems to start up fine, gets to the desktop and locks up.
Reboot windows and I get another blue screen.
BAD_SYSTEM_CONFIG_INFO
I try to start windows from the last good configuration. Error. Registry file failure. Cannot load hive file. I try booting from the windows cd and running a chkdsk. Hard drive starts making a buzzing sound. It gets to step 3 of 5 and stops. Failed to transfer logged messages. Status 50. Now the bios rarely even "sees" the drive. When I can get it to boot and see it, any attempt at diagnostics and repairs produces errors, locks up, or fails.
Is this a bad hard drive? I would hate to spend the money on a new one only to find it is a bad mobo or virus. How can I diagnose this? If it is a bad drive I would like to save what juice is left in it and try to recover a few files before it dies. Most of the important data has been backed up but I would like to try and get a few game save files if I can. But its not a disaster if the drive data is not recoverable.
View 3 Replies
View Related
Aug 25, 2012
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies
View Related
Sep 9, 2011
I've had my computer for over a year now and suddenly today i was watching a video when it lagged and then all of a sudden the screen went black. I turned it off and upon turning on again, I got the error "bios detected a problem with the cooling fan 902, press enter to shutdown" I have the lastest bios as far as I know and iv tried blowing into the slots with compressed air but nothing works.
View 2 Replies
View Related
Oct 26, 2009
I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
View 2 Replies
View Related
Oct 11, 2012
I recently rebuilt my pc and when starting up, the CMOS Splash Screen is shown and when I try to load the OS in "start windows normally" it flashes a single frame of a BSOD and restarts or if I select Safe mode to use system restore,then the OS will try to load and Windows will search for the problem but not find it.I have already sent and received the Mobo, CPU, RAM, PSU and GPU for warranty testing (previously, it would not even POST) and apparently they had Windows 7 running fine once they updated the BIOS.Therefore,since everything else works fine, is my SSD dead or deadish? It is detected and I have selected it as the first preference to boot.
System Specs:
CPU: i7 2600k
Mobo: Gigabyte Z68 UD3XP
RAM: Corsair Vengeance 4x4Gb 1600 CL9
PSU: Corsair HX750
GPU: Asus DCII gtx 560 ti TOP
DVD: Lite on 22x
Case: HAF 922M
SSD: Intel 520s 128GB
HDD: WD Caviar Black 1TB
I will attempt to create a USB boot but would like to get the SSD going as it has my work programs. Also, has anyone had problems with the 520s? I chose that one because apparently it was more reliable.
View 8 Replies
View Related
Mar 9, 2011
whenever my computer restarts it gives me a message that says 'no boot sector on internal hard drive' then after a second a message pops up that says something a long the lines of 'press r1 to try reboot', etc ..everytime I hit f1 the computer will load up windows 7 fine though. But for some reason every single time I restart if gives me that 'no boot sector on internal hard drive' message
View 2 Replies
View Related
Feb 4, 2012
I recently bought a vaio VPCX113KG off ebay. After a month of use the pc wont boot. it comes up as "operating system not found" but the laptop doesn't have an optical drive and I can find downloadable recovery media. What should I do? I think the hard disk is being detected in the bios.
View 2 Replies
View Related
Jan 10, 2013
I originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64
Motherboard: Gigabyte GA-Z77X-UD3H
Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
View 1 Replies
View Related
Jul 10, 2011
how to set bios to from CD. I have dell computer
View 3 Replies
View Related
Jan 7, 2012
PC does not boot to the bios.. motherboard is z68x-UD3H-B3F10
View 9 Replies
View Related
Jan 8, 2012
I have tried to boot PC to the Bios by taping Delete, in the past it booted to BIOS but now won't.It poots to Windows only, keyboard is fine all keys works.I am not able to get in BIOS, I have updated Bios but nothing help me with this issue.
View 1 Replies
View Related
Dec 5, 2012
I bought a legit copy of windows 7 64-bit for my new computer... but i didn't have enough money to buy an optical drive. Is there anyway i could use my laptops optical drive to transfer to files to a USB? And can i boot from the USB from my Bios?
View 4 Replies
View Related
Feb 21, 2011
When I go into the Bios Boot screen there is no CD, HD etc option. Blank? Any suggestions please?
View 4 Replies
View Related
Nov 26, 2011
Seems to be Deadand now other other HP desktop (with the identical motherboard) is now failing as well. This one is a pc6000, and all I ever get is the screen that displayes the BIOS, processor, CPU speed and the 4 memory banks. So far, so good.Then it says Initializing USB controllers.DoneThen several blank lines before it says Press <F10> to enter SetupThen nothing... although sometimes after the 'Done' line it says 1st Drive: None2nd Drive: None3rd Drive: None4th Drive: None00 USB mass storage devices found and configuredbefire going to a new screen where it sayseboot and Select proper Boot device or Insert Boot media in selected Boot device and press a keyPressing any key just redisplays the msg.What could possible be going on with these 2 nearly identical HP desktops with the same mobo?
View 9 Replies
View Related
Feb 13, 2013
I've recently purchased a used A665-3DV6 Toshiba Satellite Laptop. It had the BIOS password problem. So I've jumped the CMOS and cleared the password. I've initiated the "out of box state" and it went through the whole process. When it was finished I shut down the computer. Then the next morning I booted the computer up and it stated "HDD Boot Failed". I tried running Factory reset again but there is only a blinking cursor on the top left hand corner of the screen.
View 3 Replies
View Related
May 9, 2009
I have this weird issue since i installed Comodo Firewall 3.9
I start the computer, the bios logo loads up, it takes 1.5 mins (like 10 sec before) till it continues to the windows boot manager, from there on everything works fine.
So far ive updated my bios, loaded the defaults without any success.
I also disabled my bios "quick boot" feature, and it seems that it lags for 1.5mins at the point where it checks that everything is ok, it says something like: CPU: amd athlon 64...xxxx, thats where it takes 1.5mins, then continues to test memory etc but that took too long for me, and i ran a memtest 2 days ago without any problems.
I wondered if it could be in any way possible that the firewall i installed is causing the problem, as far as i know its not officially Windows 7 compatible.
Some specs that might be useful:
ASUS Crosshair (Newest bios)
AMD Athlon 64 X2 5200+
ASUS ATI EAH4850
2GB of DDR2 memory
Ask if you need any other information.
View 5 Replies
View Related
Jun 15, 2012
I have a laptop that I have set-up with 3 OS's; windows 7 (to use), windows 8 (to learn), and Linux (to do everything else). The other day I noticed a few issues and decided I needed to remove windows 8 and Ubuntu in order to prevent a system crash (kinda ironic once you read the whole thing). When I installed Ubuntu and windows 8, I created a 45gb partition for them. Not a big deal. The problem is when I removed ubuntu/windows 8 and their partition, I forgot to set something with the windows 7 partition so it was the main boot partition. Now its trying to boot from a partition on the hard disk that doesn't exist. I know for a fact that the windows partition is completely functional and intact. It's a rookie mistake and I make no excuses. At this point I'm 90% sure I need to reinstall windows 7, which I can easily do as I have restore disks and multiple back-ups. I was just curious if there is a way to change this either through BIOS or using a USB/SATA cable to externally boot and access Windows 7 system files.
View 2 Replies
View Related
Jun 2, 2012
OS Windows 7 ProOut of the blue, I started noticing that all the desktop icons were going blank, mouse freezing and now when I reboot, it locks up at the AUTO DETECTING USB MASS STORAGE DEVICES
Device #01 :
Device #02 :
I have checked all the USB things are connected properly, all cables etc. are in but no luck!I can vaguely recall seeing something somewhere during my travels over the PC something about a "media disconnected" and I am sure it was saying something like bigpond.qld.com.au ........... Not 100% sure though.
View 1 Replies
View Related
Jul 5, 2012
I have a Lenovo ThinkPad X60 laptop with Win7 32-bit Ultimate and an SSD (I know, I know, just go with it. I'm building a desktop soon). I could list the specs, but that's useless for this problem (I'd think).
At times (not always), when either resuming from hibernate or booting up from a shut down, the computer generally freezes at the point right after the BIOS screen. So it's just a black screen. This is before the window that says "starting up" (literally a window... the Windows logo). Whenever it freezes, it NEVER goes to the boot screen of Windows. I'm assuming this is an error with the hard drive, since the OS is on the SSD and the boot screen is from the mobo. However, this only started happening after a rather heavy fall to the ground that cracked many parts of the plastic shell on the computer. It still works occasionally when I can get it to boot up (nothing different when it boots up... same settings and everything. Spontaneous).
I have tried:
1) Cold reboot
2) Removing battery
3) Going off only battery
4) Unplugging EVERYTHING from the computer
I have not tried chkdsk yet. Is it necessary? Also, would there be a log somewhere of what happened? It never booted into Windows.
View 4 Replies
View Related
Apr 4, 2011
We just build a new system to play around with the Intel Rapid Matrix RAID
Asus P8P67 MB + 8GB RAM+ I5 2500K + 2xWD BLUE HD SATA 6 IN SATA 0 and SATA 1 ( SETUP AS RAID Mirror)We install the Window Ultimate 64 Bit in the RAID Drive .... No problem after all the drive install We also allocate 50GB for doing a image backup (Drive F) We restart the system and goto BIOS to set the HD from RAID to AHCI ( This is the situation happen when the BIOS reset)
Supprise me the system can boot form the Drive ...... (In Device Manager .... I see two WD 1TB HD instead of one 1TB RAID Drive) But when I use Disk Manager it takes really long time to run... I can't wait for that long and shut down) On My computer I only see one HD with 4 Partitation ...
I restart the system and Goto the BIOS to reset back to RAID...and it give error..
I but the W7 Ultimate Boot disk to repair but no success.. Try to load the Backup Image .... cannot find it...
From the old time .... if the BIOS reset it will set to IDE Mode ... Then I am'not able to login to window it will come up blue screen and I just reset to RAID it will fine.... But nowadays... the New MB set Default AS AHCI...then I encounter this issue.... Lucky ... we just testing the new system now..
If I have a cooperate customer want to setup a RAID drive and suddenly Power Cut Down.... BIOS reset..
View 1 Replies
View Related
Feb 9, 2011
I'm trying to do a startup repair of Windows 7 x64 on an SSD but can't boot from the CD-ROM while in AHCI mode. I have set CD-ROM at the top of the boot order in BIOS but this is just ignored and the computer boots from the SSD with the knackered version of W7x64. I read somewhere that when in AHCI mode, the BIOS boot order may include "CD-ROM" but it's not the real device anymore. I tried looking for the CD-ROM by its manufacturer name in the list under Hard Drives but it's not there either.So just how do I go about booting from the CD-ROM in AHCI mode? No problems booting if I set the BIOS back to IDE mode, install Windows 7 and then do the registry hack to install the AHCI drivers, but I'd like to be able to boot from the CD-ROM in AHCI mode.
P.S. I have a Gigabyte GA-MA78GM-US2H motherboard and am using the latest BIOS version (F9D)
View 2 Replies
View Related
Feb 13, 2013
When I built this computer back in the dark ages of 2007, I set it up to dual-boot Vista and XP. Every time I powered on, I'd get a prompt to boot into Vista or "older version of Windows," meaning XP. I'd pick one and go on my merry way. In 2011, I formatted the Vista drive, installed Windows 7, and deleted the XP install since I had XP mode in 7 if I needed compatibility. No more dual-boot prompt. I had no issues until last night, when I went shopping for a new hard drive. My motherboard, a Gigabyte GA-P35-DS3L, was running an old BIOS that has problems with drives of 1 TB or more. So in order to be sure I could use the drive I'm buying, I updated the BIOS to the latest revision, using Gigabyte's @BIOS utility to do it in-OS rather than through the boot menu.
When I rebooted, the system POSTed fine. But instead of booting Windows, it gave me the old choice between Vista or the "older version of Windows" - despite neither of those operating systems being present. If I tell the boot manager to do anything, it spits out an error since it can't find any OS files it recognizes. The BIOS itself seems to be fine - I'm writing this on the affected computer, running Ubuntu with a Live CD. I can see all the hard drives, open files, etc. I just don't know how to get the boot manager pointed at Windows 7 again.
View 7 Replies
View Related
Nov 16, 2011
Windows 7 ultimate 32 bit suddenly switched off, reboot does not show on screen which reads "HDMI CHECK SIGNAL CABLE". Using ATI HD4350 fanless with heatsink connected via HDMI lead. tried another monitor using white dvi cable monitor stays blank then shows power saving mode. So that eliminates the monitor & hdmi lead. Could a duff graphics card show this error? No on board graphics. Unable to get into bios no bleeps, Windows 7 dvd no good either, all fans come on and motherboard MSI X58 on board indicator light goes from amber to green when pc turn on so m/b must be ok.
View 7 Replies
View Related
