I have this weird issue since i installed Comodo Firewall 3.9
I start the computer, the bios logo loads up, it takes 1.5 mins (like 10 sec before) till it continues to the windows boot manager, from there on everything works fine.
So far ive updated my bios, loaded the defaults without any success.
I also disabled my bios "quick boot" feature, and it seems that it lags for 1.5mins at the point where it checks that everything is ok, it says something like: CPU: amd athlon 64...xxxx, thats where it takes 1.5mins, then continues to test memory etc but that took too long for me, and i ran a memtest 2 days ago without any problems.
I wondered if it could be in any way possible that the firewall i installed is causing the problem, as far as i know its not officially Windows 7 compatible.
I purchased a system with dual GTX580's about a year and a half ago. I have had issues with system crashes (lockups, no blue screen, and no alt-tabbing out of them) almost from the beginning. Since I am impressed with some of the technical responses I have seen on threads in this forum, thought I'd reach out for help before I pull what hair I have left out.....
I tried literally every different bios update available, every single driver release Nvidia has released, too many clean windows installs to count, MSI Afterburner/EVGA Precision (video voltage increases, clock decreases (removing EVGA superclocking), replaced the SLI bridge, different ram, different powersupply cables, different fan speeds, and so many other things over the past 1.5 years it's rediculous.
In preparation for trashing the cards, I pulled them out and put my old cards back in. These are also EVGA brand, 8800's, also can run them in SLI with the same bridge, and not a single problem. This is while running the same driver release (clean install though) as the 580's.
So I put one 580 back in, both slots 1 & 3, and to my surprise it worked just fine in either PCI slot. Tried the other 580, also works fine when alone. Put them both in, put the bridge on, and it crashes right after Bios loads, before it even makes it to the windows logo/login screen.
Seems to have gotten worse over time (was just during intense gaming, next it's when in windows but not gaiming, sometimes at the Windows loading Logo, and sometimes even at bios load.)
Overheating? Temps are fine..even when stress testing with Kombuster/Furmark/Prime95/MEMTest/etc. temps get warm, up to 85 on CPU cores, and 75 on video card, but all tests are fine.
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
I have a HP Touchsmart 300-1060a (Home Premium Windows 7 64 BIT) which I bought few years back. Now for the last 6 months or so I started getting issues with my machine was not displaying anything at all after turning it on. So I had to hard reset my power from the machine and then was able to see it started displaying again.At first I suspected graphic card (NVIDIA GEFORCE) but then I did my diagnostic test and nothing was found.One day, I started re-imaging my machine as a fresh and then after this it never came back ONLINE. I read all HP forums & even HP Online support was unable to help me to find the cause.Because when I turn on my machine I can see the power light was on and could hear big fan noise but mo HDD activity at all.So at this stage, I suspected either motherboard or BIOS but wasn't 100% sure what could be the real cause because I was sure it was not due to graphic card.So first I re-setted by my BIOS to see if it helps but it didn't came up at all. So then I took my machine to a Computer repair shop (a friend of mine) and we detected it could be due to the regulator which supplies power to the CPU and motherboard.So we replaced that part and now my HP Touchsmart is running fin since then.But I have lost my HP Startup logo with options such as below: [code]
I had this problem 3 days ago...i ran the startup recovery and it worked fine.. the next day i tried turning on my laptop and the same blank screen after the logo...so i thought ill run the startup recovery but now it says cant fix it automatically..
I have just bought a laptop with OEM Windows 7 in it. There are some minor annoyances in it. When I switch on the laptop, a logo of the institute from which the laptop's seller got the laptop (the engineering institute presents a laptop to every student), appears then booting process continues as it should.
I wish to remove this logo. Also, CD/DVD Drive isn't visible in Computer.
I have a machine running windows 7 64bit and previously i had a 500gb hdd in the machine, i purchased a tv monitor of a friend who had upgraded his, but once i connected this through dvi i have the issue stated no signal past the windows logo upon boot. my friend came around to my house one night and solved this issue, he did something within the task manager and something else and by magic it worked, i think he said something about conflict of drivers i'm not too sure we are going back a few years. So i KNOW that my monitor works because it has been working for 3 years at least.Now my hdd failed so i recently upgraded for a nice new ssd super quick as we all know, i did a fresh install of windows and now i am having this same issue with my monitor not displaying and unfortunately for me this time i have not got a friend so close by to come and fix this again.so what i do know is that there is a fix somewhere within windows and that i do not have any faulty hardware or monitor, but i am stuck.
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first partition as NFTS for Windows. After that, I proceeded to installing Windows. The first time I tried it, I was successful although I did need to reformat that NFTS partition I had made because it said that the partition table type (GUID) was not compatible. Windows 7 installed fine after that. However, when I try to install Ubuntu, it sees the whole disk as blank. I tried resolving this issue with GParted but that too saw the drive as if it were blank even though Windows 7 was installed. After that, I booted up the GParted Live CD once again and changed the partition table to MS-DOS. My Windows 7 boots up and goes through all the tasks before the first boot up. When it restarts for the first time, it fails to boot; it simply stays on the glowing Windows logo. I've tried formatting the entire disk through the Windows 7 disk and partitioning from there several times and I still get the same results.
My computer worked great yesterday. I closed the lid as usual to end use and save screens. Turned computer on today and only HP logo shows. Left bottom corner says press escape for start up menu.
I can't access system recovery or most of the advance boot options. I have tried using repair cds and install cds but the computer refuses to boot from cd drive my laptop is an hp model g61. I don't really know what other specs you need I have noticed it always stops when loading a certain driver atipcie.sys. The full error I get is: "Stop: c0000135 the program can't start because %hs is missing from your computer try reinstalling the program to fix the problem". I'm not even sure what that program is.
trying to solve a problem on a dell inspiron n5010 running windows 7 when you switch it on it goes to the black boot up screen and you are given these options Launch startup repair(recomended) start windows normally
if i select start windows normally it goes to the windows start up logo but eventually freezes then crash to a blue screen than goes off immediatley before i can read the info on screen if i select the launch start up repair it goes to a blue screen with some small pics of leaves on and stays there and does nothing
Startup Repair Infinite Loop Recovery i have read this but i dont even get the grey option boxes just that blue screen background
I installed a raid combo card with sata and ide and also hooked up two ide drives now boot never finishes even if i boot with a backup drive or from a win pe dvd i have set bios back to defaults and still will not boot
I wanted to dual boot Win 7 64 with my vista 32 but after the install completes and the computer reboots it hangs on the Win 7 boot logo and then just stays there until i turn off the power button. It's kinda like the problem when you have a USB plugged in and the boot logo hangs except there's nothing plugged into the comp. Reinstalled again the the same result. When I look at the win 7 drive from vista it looks like all the files are all there but it just keeps hanging on that logo =(. What should I do?
Also when i try and boot into safemode it hangs on "Classpnp.sys"
I've looked elsewhere and seen that people solved this problem by updating bios but I have the latest version of mine =(
have done a few internet searches on this one, but the things to try that i have come across have not worked in reinstating the nice animated windows logo on start up of windows 7. I appear to have lost it after doing a windows system restore and am now left with the very dull green progress bar which is low res and boring!!
As i say i have tried the bcdedit and bcdboot commands that are listed on many sites as resolving this issue.
Laptop couldnt bootup, windows 7 logo would spin halfway before entering system recovery.
System repair, memory diagnostic all did not help. Tried to enter safe mode, but it keeps reverting back to system recovery screen after I hold f8/f5.
Problem Signature 01: startup repair offline. Problem signature 02: 6.1.7600.16385 Problem signature 3: 6.1.7600.16385 Problem signature 4: 21200685 Problem signatire 5 : Autofailover Problem signature 6: 3 Problem signature 7: bad driver
i'm building an htpc with xbmc on my windows 7 so i'm trying to customize the boot process. I changed successfully the boot logo (win 7 one) and the boot logon screen. The problem is that my tv supports only 1280x720 res and not the 1024x768 that needs the new windows 7 boot logo, so it automatically starts with the old windows vista boot logo.Can i customize that too in win 7? If i can how can i do it? It's the same of windows vista?
Last night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
I have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.
I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
Alright I am running Windows 7 ultimate x64 on my newly built computer. My computer can successfully boot past the bios and get to the logo screen. Then I get to the Windows logo which is a hit or miss. Sometimes it will boot successfully and I will have no problems whatsoever and I can enjoy my computer without worrying about anything. Then sometimes it will get hung on the logo and it will just stop responding. I don't know if this is an issue with my HDD or maybe my power supply. I think that this may be a problem with my power supply because I notice that my keyboard LED turns of when it hangs like that. The only question then is "why is this not a consistent problem that I can isolate?"
Here are my specs: Case: Coolermaster HAF 922 CPU: Core i7 3930k (3.2 ghz stock; will OC to 4) Motherboard: x79 Asrock Extreme 4 (x5 sata 6.0 Gb, x2 usb 3.0 ports, PCI-e 3.0 support, and quad-channel memory) RAM: 8 gigs (2x4 gig's) of 1600 DDR3 GPU: x1 Radeon 6870 PSU: 600 Watts HDD: 500 gig's 7200 RPM (Seagate baracuda) Cooling: closed loop liquid cooling, Tuniq TX-2 High Performance Thermal Compound, and the standard fans on the case Optical drive: LG 12x Blu-Ray reader and DVD combo drive Monitor: 22" LED 1920x1080 -- ASUS VS228H-P (21.5 viewable)
I need help and suggestions on what to do with this black screen crisis. Mine is a little different that others. so sorry if this is a repeated thread. ive looked everywhere, and no one has the issue when they have dual boot.I have dual boot on my laptop with windows 7 ultimate 32 bit and windows 7 home premium 64 bit. the home premium came pre installed on the laptop and the ultimate version i installed later dual boot (i needed some capabilities that home premium doesn't have).I cannot see anything on my screen after windows logo while booting up my laptop bcz of the black screen after the windows logo. When i boot into WINDOWS 7 HOME PREMIUM. i hear windows logon screen notification noise but see nothing! oddly enough even my built in webcam logs me in with VeriFace software with my face, passwordless! ALSO my laptop boots fine with windows 7 ultimate and i can see everything, and it works great! i need the other version to WORK cause my life is in that other version of windows. i cannot factory restore!!!
What i have tried: the keyboard is also unresponsive, bcz i held down a bunch of keys to see if it makes the beep noise. I closed the laptop lid to see if it goes into hibernation and waited 3 mins to see if it still does, so that when i open it i can see everything (it has worked before). nothing. i rebooted a bunch of times even with a second screen attached, tried to guess switch into projector mode with my function key and switch screen/projector button. i have also done a power cycle. i think the registry is screwed, or maybe the graphics card drivers are ruined. have not done a registry repair through the other windows version (doing that next). i have defragged both partitions for both of the windows 7 versions through the one that works.What may have caused it: the last time i used home premium, i rebooted so that i can use the ultimate version (for the extra capabilities). i was not watching and it booted up in home premium, and the built in cam is so fast that i merely looked at the laptop and it logged me in. i was being unpatient, bcz you have to wait for the lenovo programs to load before you can restart. so i forced shut down (very bad idea) by holding the power button and booted up in ultimate finally while watching.
I got new HP Slimline desktop and i change the OS to Win 7 Ultimate 32bit.But since i installed new Win the OS seems to boot normally (you can hear logon session sound), but the image of win boot remains freeze in the display.Even, you can shutdown the system pressing once the power button, hear the sound, wait few seconds and pc turn off.
I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
I have tried to boot PC to the Bios by taping Delete, in the past it booted to BIOS but now won't.It poots to Windows only, keyboard is fine all keys works.I am not able to get in BIOS, I have updated Bios but nothing help me with this issue.
I bought a legit copy of windows 7 64-bit for my new computer... but i didn't have enough money to buy an optical drive. Is there anyway i could use my laptops optical drive to transfer to files to a USB? And can i boot from the USB from my Bios?
