Lenovo Ideapad Y560 'black Screen In Boot Up After Windows 7 Logo'

Sep 24, 2012

I need help and suggestions on what to do with this black screen crisis. Mine is a little different that others. so sorry if this is a repeated thread. ive looked everywhere, and no one has the issue when they have dual boot.I have dual boot on my laptop with windows 7 ultimate 32 bit and windows 7 home premium 64 bit. the home premium came pre installed on the laptop and the ultimate version i installed later dual boot (i needed some capabilities that home premium doesn't have).I cannot see anything on my screen after windows logo while booting up my laptop bcz of the black screen after the windows logo. When i boot into WINDOWS 7 HOME PREMIUM. i hear windows logon screen notification noise but see nothing! oddly enough even my built in webcam logs me in with VeriFace software with my face, passwordless! ALSO my laptop boots fine with windows 7 ultimate and i can see everything, and it works great! i need the other version to WORK cause my life is in that other version of windows. i cannot factory restore!!!

What i have tried: the keyboard is also unresponsive, bcz i held down a bunch of keys to see if it makes the beep noise. I closed the laptop lid to see if it goes into hibernation and waited 3 mins to see if it still does, so that when i open it i can see everything (it has worked before). nothing. i rebooted a bunch of times even with a second screen attached, tried to guess switch into projector mode with my function key and switch screen/projector button. i have also done a power cycle. i think the registry is screwed, or maybe the graphics card drivers are ruined. have not done a registry repair through the other windows version (doing that next). i have defragged both partitions for both of the windows 7 versions through the one that works.What may have caused it: the last time i used home premium, i rebooted so that i can use the ultimate version (for the extra capabilities). i was not watching and it booted up in home premium, and the built in cam is so fast that i merely looked at the laptop and it logged me in. i was being unpatient, bcz you have to wait for the lenovo programs to load before you can restart. so i forced shut down (very bad idea) by holding the power button and booted up in ultimate finally while watching.

View 1 Replies


ADVERTISEMENT

Lenovo S10 Ideapad Have A Boot Screen In Vista

Oct 30, 2009

I have a question about my Lenovo S10 and Windows 7 Ultimate.I have already installed windows 7 in my Lenovo S10.Driver is okay too but only the bootscreen is vista-style.

I have tried to use some 3rd software to change my bootscreen and found nothing..

I had install the Build 7264/7600 RTM and thay were the same.

View 4 Replies View Related

How To Watch TV In Lenovo Y560 Laptop

Mar 17, 2012

I have lenovo y560 laptop which has an inbuilt tv tuner. I am trying to watch tv using vlc player and media player classic but I am unable to watch tv. How to watch tv, by using which player I can watch tv.

View 1 Replies View Related

Windows 7 Freezes On Lenovo Y430 Ideapad

Oct 30, 2009

I installed Windows 7 Professional 64-bit on my Lenovo ideapad Y430 (which came with Vista Home Premium 32-bit). It worked fine for a few hours. However, it now freezes up within 1 minute after I sign on after rebooting. The cursor stops moving, Task Manager won't come up, no disk activity, etc. Booting in Safe Mode works fine, so I'm thinking it's an issue related to a driver or service that doesn't load in Safe Mode. Event Viewer doesn't reveal much of use; only the fact that I needed to power off without shutdown. Vista still runs fine on another partition. How I can get Windows 7 running again (e.g., by identifying and removing/updating the offending driver/server, if that's what's causing the problem)?

View 4 Replies View Related

Lenovo IdeaPad Z585 Not Booting Windows 7?

Dec 31, 2012

I recently left my laptop charging in sleep mode for about 10 hours, and then opened it to see a bluescreen. I shut it off and tried to start it up, and got a black screen after a short loading bar. It then gave me the option to repair, but after seeing "Loading Files," I got another black screen, sometimes with a mouse pointer, but nothing else. The same happens after trying to load Windows normally.Eventually I figured out that if I leave the screen on the black repair screen for a while, it will progress to the blue-ish background screen shown at the login, but the square that you click on to select my account doesn't appear, and my pointer is in a weird resolution. I can't progress beyond this screen.Last night, I was getting some weird freezes when I plugged in the charge cord, where the display would lock up for a few seconds after plugging the laptop in. Also, a few days ago, my computer started running really slowly and overheating, and eventually crashed with a shutdown. It crashed when I tried to start it again, but the second time, I ran it in repair mode and I was able to start up without issue.I've tried a number of things, but there appears to be no problems with the memory.

View 5 Replies View Related

Black Screen After Windows Logo

Nov 19, 2011

I'am running windows 7 professional. When i boot the PC, i have no trouble up to the point of the windows logo. When this disappears my screen (SyncMaster 913n) keep displaying the text "optimal screen resolution is 1280x1024 60 hertz" and then i dont see anything else than that. Even if i change the screen resolution to 800x600 i get the message. My GFX is 8800 Geforce GT with the drivers 285.62 (64Bit) same issue. Everything was working fine earlier today, then after a reboot i got this issue. The computer is a clean re-install so can their be missing some drivers besides the GT 8800 that can make the problem?

View 4 Replies View Related

Black Screen With Windows Logo?

Jan 24, 2012

today i was working on the PC when the power got down for a second, i started the pc and the power blinked again, so i just waited 30 mins or so and i turned on the pc again, but this time it only got to the color balls that form the windows logo, showed the "please wait" message with a black background to finally led me to a black screen with the windows 7 ultimate logo on the bottom center, a button with some accesibility options to the left and the red button to turn off and reset the machine,i cant do anything more, Ctrl+Alt+Supr doesn't work or the windows key+R. starting in safe mode doesn't change anything neither.

my specs are:

Intel core 2 duo 2.4 ghz
2 gb RAM
250 GB HDD
geForce 9500 gt

PS: i didn't install or configure anything before the second time the power got down, and after the first one the pc started fine.

View 1 Replies View Related

Black Screen After Windows 7 Logo?

Jan 14, 2010

Basically my laptop was working fine last night. I turn it on this morning and after the windows logo appears the screen goes black. However i can see and move the mouse cursor still.I tried pressing f8 at the beginning of the start up, and tred to repair my problem using the windows 7 repair features, but it didn't work, annoyingly i forgot to set a restore point as well so i can't try that.When i go into safe mode the exact same thing happens, but with the mouse being slightly more pixelated and blocky.I've got a Windows 7 Premium 32 bit disk which i purchased from Windows, but when i load that up it tells me that to install it i need to log into windows, which i obviously can't.I'm using a HP G70-120EM, i've had it for just over 12 months (Annoyingly exactly a week after the warranty is void) and like i mentioned, i've been using Windows 7 premium 32 bit for the past 2 months

View 9 Replies View Related

Black Screen After Windows Logo

Feb 7, 2013

My laptop is hp-dv6-3122tx with ATI 5650 and intel hd switchable graphics.Recently my laptop started giving me a black screen after the windows logo. I was having some issues with my GPUs too.Sometimes my ATI card was not coming up in the device manager and i was only using intel HD. i have noticed that when that happens i can't see my laptop charging icon changes to plugged in mode even though i plug in the charger , but the laptop was of course charging perfectly . But recently i found my ATI card back in device manager and it was working pretty well. But after exactly a week I started getting some white lines appearing in the display too. With that knowledge i assumed that the black screen issue is a counter-product of the GPU issue. I used safemode to uninstall all the GPU drivers. Then i can log into windows and work normally and windows detects the GPUs and install the plug and play drivers. After they install it i can restart the pc and work normally. But once a shut this down and later when i try to switch it on i get the black screen issue from ground zero. that makes me believe that this is mere a software issue. But those white lines i mentioned about is due to hardware fault i guess. I don't know what to do right now. I don't want ATI graphics, intel HD is ok. i just want to switch this thing on and do my work coz i can't afford another laptop right now.

View 4 Replies View Related

Black Screen After Windows Logo

Nov 3, 2009

So last night I turned off my PC as usual. Rebooted it this morning and every time the Windows 7 Logo disappears, all I see is a black screen, no mouse pointer, cant bring up task manager, the pc seems unresponsive. I am currently running the PC in safe mode.

There are other threads on the forums and on google, I have tried everything so far. As a list for you, this is what I have tried:

Windows Restore

Windows Repair

Reinstalling Windows 7 (will not allow me to do so from safe mode)

Booting Windows in low resolution mode.

Booting windows from the Win 7 CD I made, this causes me to get past the windows logo, then all I see is a mouse pointer and a windows background.

Using winkey + P does nothing.

I have 2 GeForce 9800 GX2s - I use 2 displays normally, occasionally using a third. The machine was running fine last night and no new software has been installed for the past 3 days. I assume the issue is multi-display related, however the pc is totally non responsive after the windows logo which suggests something else =/.

I am totally at a loss and need this PC for my work (I work from home in Austria for several companies in other countries), I have been at this since about 5am and 5 hours later there has been no change.

View 7 Replies View Related

Windows Logo Screen Goes Black

Dec 9, 2009

when i start up my laptop (Windows 7 ultimate) after i see the windows logo the screen goes black for about 20 seconds and i have scanned for everything using malwarebytes, superantispyware , security essentials and also on start up i only have my antivirus running as all else is unticked, any ideas to the problem as i have seen people ask about it also in Yahho answers but nobody has been able to fix.

View 4 Replies View Related

Black Screen After Windows Logo?

Dec 19, 2011

I bought a new Samsung RC520 laptop. I logged in fine and started to install virus software, applications, windows updates etc. In between all this I had to reboot for the installations to be completed with no problems.

I then installed more window updates (office 2010) followed by a reboot. From this point on wards when I power the laptop on it will get as far as the Windows logo screen and then goes into a black screen. If I leave it for 5 minutes the mouse arrow appears but still black screen.

I tried booting into

Safemode, last know configuration, Enable low-resolution video (640×480)" startup but still get the black screen. Ran the repair from the Windows 7 disc. Can't do a system restore as the laptop is so new it hasn't created one yet, doh! Tried plugging it into an external monitor and still black screen on laptop.

View 4 Replies View Related

Forgot Power On Password Lenovo Ideapad S10?

Oct 31, 2012

forgot power on password in lenovo ideapad s10-3c . So help me pls. how can i crack the power on password.

View 1 Replies View Related

Black Screen After Windows Vista Logo?

Dec 30, 2012

I'm having an issue with one of my windows Vista systems. It's a HP computer (blah, I know)... and is several years old. It's issue of late occurs on start-up. After attempting to "Start windows normally", the system will display the load screen then immediately go to a black screen. It doesn't restart... it just stays black. I've tried to go into Safe Mode as well as do a system restore and go to the last known good config. Nothing works. The problem is there is over 200 gb worth of work, school and personal files on this system I need to export to my external hd. After that I don't care what happens to this freakin computer.

View 1 Replies View Related

Black Screen Of Doom After Windows 7 Logo

Jun 20, 2011

I'd hang on the windows 7 logo as it flies up (it freezes on the colored balls) and then it goes to a blue screen, hinting at hardware-related problems. After a restart or two, I am usually able to make it to the desktop like normal. I just took this easy route, assuming that ignoring it would make it go away.Well, this morning, it happened again, but then when it made it passed the windows7 logo, I got to a black screen with just my mouse. This is a common enough problem- plenty of complaints and advice out there. When I try running safe mode, it hangs on AVG-named drivers. So i went and deleted them all through a thumbdrive linux boot (Can't I just reinstall AVG or another program once my comp is working?) but now it hangs on a new driver so I stopped deleting them. CLASSPNP.sys, which is another hugely common problem. Safe mode is out.Put my digital copy of Windows 7 on another thumb drive and booted to that to try and use recovery mode. No recovery images, memory check didn't yell at me, chkdsk seemed to run fine (unless running it in the X or "boot" drive is wrong and I have to figure out how to navigate to the C or D drive in cmd ...but even then, what do I do with the result of chkdsk, especially when it will probably show no problems?) so I THINK recovery tools are out, unless I failed to use them correctly.So now I'm faced with re-installing windows, in which case I have no idea what my activation key is, being that it was a digital copy and I don't have the student access to where I originally downloaded it.

TL;DR:

1) Can I find my win7 activation key with a key-finding/decrypting program while using my linux boot?

2) I've read that my GPU (nvidia 460) or even PSU (Corsair 650) could be to blame- are there ways to troubleshoot/verify that if I don't have other parts to replace them with?

View 3 Replies View Related

Black Screen With Cursor After Windows 7 Logo

Jul 4, 2011

I have xfire 5770 with driver 11.5b hotfix and win7 ultimate. This is fresh built so no hardware fault.
620w corsair and 4 gb kingston blu, i7 2600k

View 1 Replies View Related

Lenovo Ideapad Z470 SD Card Reader Not Working?

May 8, 2012

I've got a new Lenovo Z470 with Windows 7 32 bit.When I put an SD Card in the slot from my camera nothing happens.The card doesn't show up in My Computer.I've looked on the Lenovo website for drivers but can't find anything specific to this problem.

View 3 Replies View Related

Dedicated Graphics Card In A Lenovo Ideapad Z580

Oct 24, 2012

how i can get my Geforce GT630m to work in my lenovo ideapad Z580 i have tried every conceivable option and have had no success. I have tried the Nvidia control panel, bios and the windows control panel.

View 2 Replies View Related

Black Screen With Mouse Pointer After Windows 7 Logo?

Sep 6, 2012

I am running Windows 7 Home Premium.All of a sudden, it has stopped starting up without me installing anything new.I gets past the bios, shows the Windows logo and then before the login page appears, the screen goes black and only has the mouse pointer (which I can move around curiously!).I have tried doing Startup repair, loading in Safe Mode, loading with lower screen resolution, loading with Last Known Good Configuaration, done a memory scan: they all lead to the same result.I don't think it is an issue with the Hard Drive because I can still hear it spinning, also, I am able to pull files off it when I plug it in to my USB (using an adapter). Also, Windows loads to some point and it would get stuck at the bios if it was.Don't think it is the graphics card or I wouldn't be able to see anything that I see up until that point including the mouse pointer.I have tried using Google but many places have left this unresolved or the problem is not exactly like mine.

View 2 Replies View Related

Restoring Lenovo Ideapad Z560 - Disk Read Error

Nov 22, 2012

I don't have a one key rescue button but have one key rescue desktop shortcut. When I launch it the laptop restart but gives error 'disk read error, press cntrl+alt+del to restart'. Also while using laptop my laptop gives a beep sound. And it hangs and the hard disc rotation light stops. I want to restore my laptop but I can't.

View 1 Replies View Related

Restoring Lenovo IdeaPad Z560 - Disk Read Error

Nov 23, 2012

I had problem starting my Lenovo ideapad z560. After many tries it started so I immediately launched one key app. laptop rebooted but showed a error saying 'Disc Read Error. Press ctrl+alt+del to restart'. Now I am using laptop in safe mode. One key app restores my laptop to earlier time. I don't have a windows cd. The OS is hidden in hard disc. Also my windows restore is not working and I don't want to lose my genuine windows.

View 1 Replies View Related

BSOD - Black Screen After Windows Logo For A Long Time?

Jul 9, 2012

Recently my pc starded giving me a Black screen with interactive mouse pointer after the windows logo. I think the official term

View 1 Replies View Related

Black Screen After Logo?

Dec 10, 2012

Windows 7 64-bitIntel DZ77GA-70K Extreme SeriesIntel i7-3770k2x2GB OCZ 1600 GoldRamRadeon 5870My mobo (EVGA X58) called quits so I purchased the new one listed above.After installing everything I kept getting a "Media test failure" error and fromreading other threads I figured it was the hard drive. Also got BSOD after thewin logo on start up when I remove network boot in the bios.I purchased a new 500GB Caviar Blue to replace my 1Tb Caviar Black Western.First boot I got to the windows install, it froze for about 2hrs with a loading icon.I reset the computer and now after loading windows files and the start logo itjust suddenly goes to a black screen. Before login.

View 3 Replies View Related

Black Screen With Cursor After Loading Windows 7 On Lenovo Thinkpad?

Sep 12, 2012

wondering if anyone could help me solve this problem. When starting computer everything works fine, the windows logo loads, I get the welcome word on the screen and just when the screen should turn into desktop all I get i black screen with a cursor. I can access the Task Manager through CTRL+Alt+Del.restart or shut down the computer. I tried setting it to an earlier date, but no difference. I tried the system repair - found no problems. So do not know what to do with it. It does load in safe mode.This has happened yesterday after I have attached hdmi cable to it, which I have done many times previously without any problems, do not know if this could have any connection to the problem.

View 1 Replies View Related

No Logo Or Start Up Screen, Just Black

Dec 2, 2012

Recently i updated my M17x R2 laptop,windows 7, ati 4870x2 graphics, 2 x 320GB hard drives,and all of a sudden little blue screen came up, all i had time to read was something about video drivers update,then computer shut down,now when i start up all i get is black screen,nothing else not even logo screen,i am certain this is not hardware problem as everything has been running perfectly,its something to do with the updates,unfotunately cd/dvd drive is broken so my only option is to do something through USB,only problem with that is i cant get into bios F2 or boot menu F12 to change boot order because screen black,so i need something on USB that will overide the bios/boot,also tried pressing F8 and nothing,but when i do start up everything sounds fine,fans,cpu,its just screen

View 3 Replies View Related

GTX580 Black Screen/Reboot In Games, Windows Logo, Even At Bios Load

Jun 9, 2012

I purchased a system with dual GTX580's about a year and a half ago. I have had issues with system crashes (lockups, no blue screen, and no alt-tabbing out of them) almost from the beginning. Since I am impressed with some of the technical responses I have seen on threads in this forum, thought I'd reach out for help before I pull what hair I have left out.....

I tried literally every different bios update available, every single driver release Nvidia has released, too many clean windows installs to count, MSI Afterburner/EVGA Precision (video voltage increases, clock decreases (removing EVGA superclocking), replaced the SLI bridge, different ram, different powersupply cables, different fan speeds, and so many other things over the past 1.5 years it's rediculous.

In preparation for trashing the cards, I pulled them out and put my old cards back in. These are also EVGA brand, 8800's, also can run them in SLI with the same bridge, and not a single problem. This is while running the same driver release (clean install though) as the 580's.

So I put one 580 back in, both slots 1 & 3, and to my surprise it worked just fine in either PCI slot. Tried the other 580, also works fine when alone. Put them both in, put the bridge on, and it crashes right after Bios loads, before it even makes it to the windows logo/login screen.

Seems to have gotten worse over time (was just during intense gaming, next it's when in windows but not gaiming, sometimes at the Windows loading Logo, and sometimes even at bios load.)

Overheating? Temps are fine..even when stress testing with Kombuster/Furmark/Prime95/MEMTest/etc. temps get warm, up to 85 on CPU cores, and 75 on video card, but all tests are fine.

View 9 Replies View Related

Black Screen Back After Toshiba Logo

Mar 14, 2012

i installed OS windw 7 and there was only one pertion. after the toshiba logo it brings a black screen, cursor blinking its a toshiba satellite c660

View 1 Replies View Related

45-60secs Black Screen After Window Logo Before Desktop Load?

Oct 4, 2012

I have an MSI Laptop which I bought about a year ago was running fine and at the beginning of September started having the issue of a black screen, for about 45-60 seconds, between the windows logo and the desktop loading.

The laptop has:

Intel Core i7 460M Processor 2.53Ghz
Genuine Windows® 7 Home Premium 64-bit
4G DDR3 memory
Nvidia GeForce GT 540M
15.6" 1366x768 HD
Intel® HD Graphic VGA

[code].....

The above 3 files exist in the directories asked for so not sure why it can't load them.Although the laptop works fine when it's loaded, the additional time on this blackscreen is just winding me up as it didn't do it before.

View 3 Replies View Related

Computer Is Frozen, Black Screen With Movable Mouse After Splash Logo?

Jun 8, 2012

Computer is frozen, black screen with movable mouse after splash logo. Same happens in safe mode. The log in screen never shows up. The computer sounds like its loading at that point, but nothing ever comes up. I can get into ubuntu. This happened after updating my graphics card nvidia. I have dual monitors. Windows 7 64 bit Home Premium, HP Pavilion p6107c Desktop.

View 1 Replies View Related

Whenever Boot Up Computer It Shows Advent Logo-screen / Where Can Access Boot Menu

May 7, 2012

I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.

View 4 Replies View Related

Windows 7 Logo Flashes On Screen But Takes 15 Minutes To Boot?

Aug 8, 2011

I have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved