Windows Animated Logo Not Appearing On Boot Up
Mar 25, 2011
have done a few internet searches on this one, but the things to try that i have come across have not worked in reinstating the nice animated windows logo on start up of windows 7. I appear to have lost it after doing a windows system restore and am now left with the very dull green progress bar which is low res and boring!!
As i say i have tried the bcdedit and bcdboot commands that are listed on many sites as resolving this issue.
View 9 Replies
ADVERTISEMENT
Dec 13, 2012
Last night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
Specs: MSI 790FX-GD70 | AMD Phenom II X4 945 | 4x2GB G.Skill Ripjaws DDR3-1333 | 1x80GB Intel SSD (OS) | 2x1TB Samsung Spinpoint F3 7200RPM HDD (other) | 1x2TB WD Elements external HDD (backup) | XFX RadeonHD 6870 1GB GDDR5
View 7 Replies
View Related
Jun 28, 2012
i have a desktop computer i used it to install Windows 7 ultimate x86 and i have a laptop i used it to install Windows 7 ultimate x64 the desktop and laptop both support x64 systems, i cloned both computers with Norton ghost and when i restore the cloned image to it's own computer it works with no problem but when i try to restore the image from my laptop to my desktop computer or the image from my desktop to my laptop windows boot but freeze at the animated windows 7 logo screen? i tried to generalize the system with sysprep but i failed cause my computer want start after i used sysprep?
View 9 Replies
View Related
Jun 20, 2012
I have a 64 bit home premium and am trying to shave a few seconds off the startup time. I want to disable the animated logo at startup so I started msconfig>boot tab> checked the "no gui boot" box but the animation is still there!
View 7 Replies
View Related
Dec 8, 2011
I am on Windows 7 Pro Platform without Aero support.
When I boot my desktop I do not get the animated Windows Logo as the first screen and instead get a rolling bar like I did in XP.
get animated Windows Logo as the first screen while booting?
View 7 Replies
View Related
Dec 30, 2010
I'm trying to get the animated boot screen to work on my home theatre PC, after scouring what feels like the whole of the internet, I can't find a solution to get it to work, and I'm stuck with the Vista scroll bar. I am using an Asus M4A785D-M Motherboard, however I have disabled the onboard graphics and am using an external card (Radeon 4350). This is plugged into my home theatre receiver which in turn is plugged in to my Sony LCD TV (1080p).
I have tried the following commands:
bcdedit /set {current} locale en-UK and bcdboot %WinDir% /l en-US
In the command prompt. I have also tried a repair installation over the original which has not worked. I've also fiddle with a number of different BIOS settings without any luck. The resolution on the screen seems to be downgraded when the animated boot screen appears (i.e. it was 720p and then goes down to 480p), which seems odd.
View 6 Replies
View Related
Aug 21, 2010
I just installed windows 7 pro (clean install from Microsoft's student upgrade program) but it boots with the old vista boot screen! I want the windows 7 boot screen! All the other posts I found on this usually had to do with BCDedit which I have tried but they didn't work. I already checked msconfig and "no GUI boot" is not checked.
View 4 Replies
View Related
Sep 21, 2009
Is there a way to add your own animated boot screen to Windows 7 startup? I know it was possible to change the picture on older versions, but this was only a static image.
View 1 Replies
View Related
Feb 4, 2009
After I installed Windows 7 64 to dual boot with Win732, and fixed the boot menu to show both options (thanks to those of you that helped with that), I somehow lost the animated boot screen splash. I now have the "Vista" green bar.
Is there a setting somewhere that controls this?
View 5 Replies
View Related
Dec 26, 2011
i am using windows 7 ultimate 32 bit, and when i install windows xp to install some software that is not compatible with windows 7, after i finish installing xp., the boot screen not showing options either ro boot windows 7 or xp, it just goes booting windows xp
View 2 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
Jan 9, 2012
I have just bought a laptop with OEM Windows 7 in it. There are some minor annoyances in it. When I switch on the laptop, a logo of the institute from which the laptop's seller got the laptop (the engineering institute presents a laptop to every student), appears then booting process continues as it should.
I wish to remove this logo. Also, CD/DVD Drive isn't visible in Computer.
View 5 Replies
View Related
Mar 9, 2010
As the title says, I want to change the boot logo in windows 7. How I do that ?
View 6 Replies
View Related
Jan 16, 2013
I have a machine running windows 7 64bit and previously i had a 500gb hdd in the machine, i purchased a tv monitor of a friend who had upgraded his, but once i connected this through dvi i have the issue stated no signal past the windows logo upon boot. my friend came around to my house one night and solved this issue, he did something within the task manager and something else and by magic it worked, i think he said something about conflict of drivers i'm not too sure we are going back a few years. So i KNOW that my monitor works because it has been working for 3 years at least.Now my hdd failed so i recently upgraded for a nice new ssd super quick as we all know, i did a fresh install of windows and now i am having this same issue with my monitor not displaying and unfortunately for me this time i have not got a friend so close by to come and fix this again.so what i do know is that there is a fix somewhere within windows and that i do not have any faulty hardware or monitor, but i am stuck.
View 3 Replies
View Related
Sep 6, 2010
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first partition as NFTS for Windows. After that, I proceeded to installing Windows. The first time I tried it, I was successful although I did need to reformat that NFTS partition I had made because it said that the partition table type (GUID) was not compatible. Windows 7 installed fine after that. However, when I try to install Ubuntu, it sees the whole disk as blank. I tried resolving this issue with GParted but that too saw the drive as if it were blank even though Windows 7 was installed. After that, I booted up the GParted Live CD once again and changed the partition table to MS-DOS. My Windows 7 boots up and goes through all the tasks before the first boot up. When it restarts for the first time, it fails to boot; it simply stays on the glowing Windows logo. I've tried formatting the entire disk through the Windows 7 disk and partitioning from there several times and I still get the same results.
View 3 Replies
View Related
May 4, 2012
I can't access system recovery or most of the advance boot options. I have tried using repair cds and install cds but the computer refuses to boot from cd drive my laptop is an hp model g61. I don't really know what other specs you need I have noticed it always stops when loading a certain driver atipcie.sys. The full error I get is: "Stop: c0000135 the program can't start because %hs is missing from your computer try reinstalling the program to fix the problem". I'm not even sure what that program is.
View 7 Replies
View Related
Oct 8, 2012
trying to solve a problem on a dell inspiron n5010 running windows 7 when you switch it on it goes to the black boot up screen and you are given these options Launch startup repair(recomended) start windows normally
if i select start windows normally it goes to the windows start up logo but eventually freezes then crash to a blue screen than goes off immediatley before i can read the info on screen if i select the launch start up repair it goes to a blue screen with some small pics of leaves on and stays there and does nothing
Startup Repair Infinite Loop Recovery i have read this but i dont even get the grey option boxes just that blue screen background
View 7 Replies
View Related
Oct 23, 2011
I installed a raid combo card with sata and ide and also hooked up two ide drives
now boot never finishes even if i boot with a backup drive or from a win pe dvd i have set bios back to defaults and still will not boot
View 2 Replies
View Related
Apr 27, 2012
Laptop couldnt bootup, windows 7 logo would spin halfway before entering system recovery.
System repair, memory diagnostic all did not help. Tried to enter safe mode, but it keeps reverting back to system recovery screen after I hold f8/f5.
Problem Signature 01: startup repair offline.
Problem signature 02: 6.1.7600.16385
Problem signature 3: 6.1.7600.16385
Problem signature 4: 21200685
Problem signatire 5 : Autofailover
Problem signature 6: 3
Problem signature 7: bad driver
View 5 Replies
View Related
Aug 26, 2012
i'm building an htpc with xbmc on my windows 7 so i'm trying to customize the boot process. I changed successfully the boot logo (win 7 one) and the boot logon screen. The problem is that my tv supports only 1280x720 res and not the 1024x768 that needs the new windows 7 boot logo, so it automatically starts with the old windows vista boot logo.Can i customize that too in win 7? If i can how can i do it? It's the same of windows vista?
View 3 Replies
View Related
Dec 24, 2012
I got new HP Slimline desktop and i change the OS to Win 7 Ultimate 32bit.But since i installed new Win the OS seems to boot normally (you can hear logon session sound), but the image of win boot remains freeze in the display.Even, you can shutdown the system pressing once the power button, hear the sound, wait few seconds and pc turn off.
View 2 Replies
View Related
Aug 8, 2011
I have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.
View 5 Replies
View Related
Sep 24, 2012
I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
View 7 Replies
View Related
Oct 7, 2011
I have a new toshiba laptop that the O/S failed to load after shutting down. It hangs at the bootup level when showing the windows logo.
View 1 Replies
View Related
Feb 23, 2012
Alright I am running Windows 7 ultimate x64 on my newly built computer. My computer can successfully boot past the bios and get to the logo screen. Then I get to the Windows logo which is a hit or miss. Sometimes it will boot successfully and I will have no problems whatsoever and I can enjoy my computer without worrying about anything. Then sometimes it will get hung on the logo and it will just stop responding. I don't know if this is an issue with my HDD or maybe my power supply. I think that this may be a problem with my power supply because I notice that my keyboard LED turns of when it hangs like that. The only question then is "why is this not a consistent problem that I can isolate?"
Here are my specs:
Case: Coolermaster HAF 922
CPU: Core i7 3930k (3.2 ghz stock; will OC to 4)
Motherboard: x79 Asrock Extreme 4 (x5 sata 6.0 Gb, x2 usb 3.0 ports, PCI-e 3.0 support, and quad-channel memory)
RAM: 8 gigs (2x4 gig's) of 1600 DDR3
GPU: x1 Radeon 6870
PSU: 600 Watts
HDD: 500 gig's 7200 RPM (Seagate baracuda)
Cooling: closed loop liquid cooling, Tuniq TX-2 High Performance Thermal Compound, and the standard fans on the case
Optical drive: LG 12x Blu-Ray reader and DVD combo drive
Monitor: 22" LED 1920x1080 -- ASUS VS228H-P (21.5 viewable)
View 8 Replies
View Related
Sep 24, 2012
I need help and suggestions on what to do with this black screen crisis. Mine is a little different that others. so sorry if this is a repeated thread. ive looked everywhere, and no one has the issue when they have dual boot.I have dual boot on my laptop with windows 7 ultimate 32 bit and windows 7 home premium 64 bit. the home premium came pre installed on the laptop and the ultimate version i installed later dual boot (i needed some capabilities that home premium doesn't have).I cannot see anything on my screen after windows logo while booting up my laptop bcz of the black screen after the windows logo. When i boot into WINDOWS 7 HOME PREMIUM. i hear windows logon screen notification noise but see nothing! oddly enough even my built in webcam logs me in with VeriFace software with my face, passwordless! ALSO my laptop boots fine with windows 7 ultimate and i can see everything, and it works great! i need the other version to WORK cause my life is in that other version of windows. i cannot factory restore!!!
What i have tried: the keyboard is also unresponsive, bcz i held down a bunch of keys to see if it makes the beep noise. I closed the laptop lid to see if it goes into hibernation and waited 3 mins to see if it still does, so that when i open it i can see everything (it has worked before). nothing. i rebooted a bunch of times even with a second screen attached, tried to guess switch into projector mode with my function key and switch screen/projector button. i have also done a power cycle. i think the registry is screwed, or maybe the graphics card drivers are ruined. have not done a registry repair through the other windows version (doing that next). i have defragged both partitions for both of the windows 7 versions through the one that works.What may have caused it: the last time i used home premium, i rebooted so that i can use the ultimate version (for the extra capabilities). i was not watching and it booted up in home premium, and the built in cam is so fast that i merely looked at the laptop and it logged me in. i was being unpatient, bcz you have to wait for the lenovo programs to load before you can restart. so i forced shut down (very bad idea) by holding the power button and booted up in ultimate finally while watching.
View 1 Replies
View Related
May 9, 2009
I have this weird issue since i installed Comodo Firewall 3.9
I start the computer, the bios logo loads up, it takes 1.5 mins (like 10 sec before) till it continues to the windows boot manager, from there on everything works fine.
So far ive updated my bios, loaded the defaults without any success.
I also disabled my bios "quick boot" feature, and it seems that it lags for 1.5mins at the point where it checks that everything is ok, it says something like: CPU: amd athlon 64...xxxx, thats where it takes 1.5mins, then continues to test memory etc but that took too long for me, and i ran a memtest 2 days ago without any problems.
I wondered if it could be in any way possible that the firewall i installed is causing the problem, as far as i know its not officially Windows 7 compatible.
Some specs that might be useful:
ASUS Crosshair (Newest bios)
AMD Athlon 64 X2 5200+
ASUS ATI EAH4850
2GB of DDR2 memory
Ask if you need any other information.
View 5 Replies
View Related
Dec 19, 2011
I had this problem 3 days ago...i ran the startup recovery and it worked fine.. the next day i tried turning on my laptop and the same blank screen after the logo...so i thought ill run the startup recovery but now it says cant fix it automatically..
View 4 Replies
View Related
Jun 2, 2009
I find the boot screen for Windows 7 to be very ugly. How can I go about changing it to this image?
View 9 Replies
View Related
Nov 22, 2012
My computer worked great yesterday. I closed the lid as usual to end use and save screens. Turned computer on today and only HP logo shows. Left bottom corner says press escape for start up menu.
View 1 Replies
View Related
Sep 19, 2009
I wanted to dual boot Win 7 64 with my vista 32 but after the install completes and the computer reboots it hangs on the Win 7 boot logo and then just stays there until i turn off the power button. It's kinda like the problem when you have a USB plugged in and the boot logo hangs except there's nothing plugged into the comp. Reinstalled again the the same result. When I look at the win 7 drive from vista it looks like all the files are all there but it just keeps hanging on that logo =(. What should I do?
Also when i try and boot into safemode it hangs on "Classpnp.sys"
I've looked elsewhere and seen that people solved this problem by updating bios but I have the latest version of mine =(
I've tried EVERY boot option in F8 to no avail.
View 1 Replies
View Related
