I got new HP Slimline desktop and i change the OS to Win 7 Ultimate 32bit.But since i installed new Win the OS seems to boot normally (you can hear logon session sound), but the image of win boot remains freeze in the display.Even, you can shutdown the system pressing once the power button, hear the sound, wait few seconds and pc turn off.
View 2 RepliesI am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies View RelatedI have just bought a laptop with OEM Windows 7 in it. There are some minor annoyances in it. When I switch on the laptop, a logo of the institute from which the laptop's seller got the laptop (the engineering institute presents a laptop to every student), appears then booting process continues as it should.
I wish to remove this logo. Also, CD/DVD Drive isn't visible in Computer.
As the title says, I want to change the boot logo in windows 7. How I do that ?
View 6 Replies View RelatedI have a machine running windows 7 64bit and previously i had a 500gb hdd in the machine, i purchased a tv monitor of a friend who had upgraded his, but once i connected this through dvi i have the issue stated no signal past the windows logo upon boot. my friend came around to my house one night and solved this issue, he did something within the task manager and something else and by magic it worked, i think he said something about conflict of drivers i'm not too sure we are going back a few years. So i KNOW that my monitor works because it has been working for 3 years at least.Now my hdd failed so i recently upgraded for a nice new ssd super quick as we all know, i did a fresh install of windows and now i am having this same issue with my monitor not displaying and unfortunately for me this time i have not got a friend so close by to come and fix this again.so what i do know is that there is a fix somewhere within windows and that i do not have any faulty hardware or monitor, but i am stuck.
View 3 Replies View RelatedI am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first partition as NFTS for Windows. After that, I proceeded to installing Windows. The first time I tried it, I was successful although I did need to reformat that NFTS partition I had made because it said that the partition table type (GUID) was not compatible. Windows 7 installed fine after that. However, when I try to install Ubuntu, it sees the whole disk as blank. I tried resolving this issue with GParted but that too saw the drive as if it were blank even though Windows 7 was installed. After that, I booted up the GParted Live CD once again and changed the partition table to MS-DOS. My Windows 7 boots up and goes through all the tasks before the first boot up. When it restarts for the first time, it fails to boot; it simply stays on the glowing Windows logo. I've tried formatting the entire disk through the Windows 7 disk and partitioning from there several times and I still get the same results.
View 3 Replies View RelatedI can't access system recovery or most of the advance boot options. I have tried using repair cds and install cds but the computer refuses to boot from cd drive my laptop is an hp model g61. I don't really know what other specs you need I have noticed it always stops when loading a certain driver atipcie.sys. The full error I get is: "Stop: c0000135 the program can't start because %hs is missing from your computer try reinstalling the program to fix the problem". I'm not even sure what that program is.
View 7 Replies View Relatedtrying to solve a problem on a dell inspiron n5010 running windows 7 when you switch it on it goes to the black boot up screen and you are given these options Launch startup repair(recomended) start windows normally
if i select start windows normally it goes to the windows start up logo but eventually freezes then crash to a blue screen than goes off immediatley before i can read the info on screen if i select the launch start up repair it goes to a blue screen with some small pics of leaves on and stays there and does nothing
Startup Repair Infinite Loop Recovery i have read this but i dont even get the grey option boxes just that blue screen background
I installed a raid combo card with sata and ide and also hooked up two ide drives
now boot never finishes even if i boot with a backup drive or from a win pe dvd i have set bios back to defaults and still will not boot
have done a few internet searches on this one, but the things to try that i have come across have not worked in reinstating the nice animated windows logo on start up of windows 7. I appear to have lost it after doing a windows system restore and am now left with the very dull green progress bar which is low res and boring!!
As i say i have tried the bcdedit and bcdboot commands that are listed on many sites as resolving this issue.
Laptop couldnt bootup, windows 7 logo would spin halfway before entering system recovery.
System repair, memory diagnostic all did not help. Tried to enter safe mode, but it keeps reverting back to system recovery screen after I hold f8/f5.
Problem Signature 01: startup repair offline.
Problem signature 02: 6.1.7600.16385
Problem signature 3: 6.1.7600.16385
Problem signature 4: 21200685
Problem signatire 5 : Autofailover
Problem signature 6: 3
Problem signature 7: bad driver
i'm building an htpc with xbmc on my windows 7 so i'm trying to customize the boot process. I changed successfully the boot logo (win 7 one) and the boot logon screen. The problem is that my tv supports only 1280x720 res and not the 1024x768 that needs the new windows 7 boot logo, so it automatically starts with the old windows vista boot logo.Can i customize that too in win 7? If i can how can i do it? It's the same of windows vista?
View 3 Replies View RelatedLast night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
Specs: MSI 790FX-GD70 | AMD Phenom II X4 945 | 4x2GB G.Skill Ripjaws DDR3-1333 | 1x80GB Intel SSD (OS) | 2x1TB Samsung Spinpoint F3 7200RPM HDD (other) | 1x2TB WD Elements external HDD (backup) | XFX RadeonHD 6870 1GB GDDR5
I have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.
View 5 Replies View RelatedI plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
View 7 Replies View RelatedI have a new toshiba laptop that the O/S failed to load after shutting down. It hangs at the bootup level when showing the windows logo.
View 1 Replies View RelatedAlright I am running Windows 7 ultimate x64 on my newly built computer. My computer can successfully boot past the bios and get to the logo screen. Then I get to the Windows logo which is a hit or miss. Sometimes it will boot successfully and I will have no problems whatsoever and I can enjoy my computer without worrying about anything. Then sometimes it will get hung on the logo and it will just stop responding. I don't know if this is an issue with my HDD or maybe my power supply. I think that this may be a problem with my power supply because I notice that my keyboard LED turns of when it hangs like that. The only question then is "why is this not a consistent problem that I can isolate?"
Here are my specs:
Case: Coolermaster HAF 922
CPU: Core i7 3930k (3.2 ghz stock; will OC to 4)
Motherboard: x79 Asrock Extreme 4 (x5 sata 6.0 Gb, x2 usb 3.0 ports, PCI-e 3.0 support, and quad-channel memory)
RAM: 8 gigs (2x4 gig's) of 1600 DDR3
GPU: x1 Radeon 6870
PSU: 600 Watts
HDD: 500 gig's 7200 RPM (Seagate baracuda)
Cooling: closed loop liquid cooling, Tuniq TX-2 High Performance Thermal Compound, and the standard fans on the case
Optical drive: LG 12x Blu-Ray reader and DVD combo drive
Monitor: 22" LED 1920x1080 -- ASUS VS228H-P (21.5 viewable)
I need help and suggestions on what to do with this black screen crisis. Mine is a little different that others. so sorry if this is a repeated thread. ive looked everywhere, and no one has the issue when they have dual boot.I have dual boot on my laptop with windows 7 ultimate 32 bit and windows 7 home premium 64 bit. the home premium came pre installed on the laptop and the ultimate version i installed later dual boot (i needed some capabilities that home premium doesn't have).I cannot see anything on my screen after windows logo while booting up my laptop bcz of the black screen after the windows logo. When i boot into WINDOWS 7 HOME PREMIUM. i hear windows logon screen notification noise but see nothing! oddly enough even my built in webcam logs me in with VeriFace software with my face, passwordless! ALSO my laptop boots fine with windows 7 ultimate and i can see everything, and it works great! i need the other version to WORK cause my life is in that other version of windows. i cannot factory restore!!!
What i have tried: the keyboard is also unresponsive, bcz i held down a bunch of keys to see if it makes the beep noise. I closed the laptop lid to see if it goes into hibernation and waited 3 mins to see if it still does, so that when i open it i can see everything (it has worked before). nothing. i rebooted a bunch of times even with a second screen attached, tried to guess switch into projector mode with my function key and switch screen/projector button. i have also done a power cycle. i think the registry is screwed, or maybe the graphics card drivers are ruined. have not done a registry repair through the other windows version (doing that next). i have defragged both partitions for both of the windows 7 versions through the one that works.What may have caused it: the last time i used home premium, i rebooted so that i can use the ultimate version (for the extra capabilities). i was not watching and it booted up in home premium, and the built in cam is so fast that i merely looked at the laptop and it logged me in. i was being unpatient, bcz you have to wait for the lenovo programs to load before you can restart. so i forced shut down (very bad idea) by holding the power button and booted up in ultimate finally while watching.
i have a desktop computer i used it to install Windows 7 ultimate x86 and i have a laptop i used it to install Windows 7 ultimate x64 the desktop and laptop both support x64 systems, i cloned both computers with Norton ghost and when i restore the cloned image to it's own computer it works with no problem but when i try to restore the image from my laptop to my desktop computer or the image from my desktop to my laptop windows boot but freeze at the animated windows 7 logo screen? i tried to generalize the system with sysprep but i failed cause my computer want start after i used sysprep?
View 9 Replies View RelatedI have this weird issue since i installed Comodo Firewall 3.9
I start the computer, the bios logo loads up, it takes 1.5 mins (like 10 sec before) till it continues to the windows boot manager, from there on everything works fine.
So far ive updated my bios, loaded the defaults without any success.
I also disabled my bios "quick boot" feature, and it seems that it lags for 1.5mins at the point where it checks that everything is ok, it says something like: CPU: amd athlon 64...xxxx, thats where it takes 1.5mins, then continues to test memory etc but that took too long for me, and i ran a memtest 2 days ago without any problems.
I wondered if it could be in any way possible that the firewall i installed is causing the problem, as far as i know its not officially Windows 7 compatible.
Some specs that might be useful:
ASUS Crosshair (Newest bios)
AMD Athlon 64 X2 5200+
ASUS ATI EAH4850
2GB of DDR2 memory
Ask if you need any other information.
I had this problem 3 days ago...i ran the startup recovery and it worked fine.. the next day i tried turning on my laptop and the same blank screen after the logo...so i thought ill run the startup recovery but now it says cant fix it automatically..
View 4 Replies View RelatedI find the boot screen for Windows 7 to be very ugly. How can I go about changing it to this image?
View 9 Replies View RelatedMy computer worked great yesterday. I closed the lid as usual to end use and save screens. Turned computer on today and only HP logo shows. Left bottom corner says press escape for start up menu.
View 1 Replies View RelatedI wanted to dual boot Win 7 64 with my vista 32 but after the install completes and the computer reboots it hangs on the Win 7 boot logo and then just stays there until i turn off the power button. It's kinda like the problem when you have a USB plugged in and the boot logo hangs except there's nothing plugged into the comp. Reinstalled again the the same result. When I look at the win 7 drive from vista it looks like all the files are all there but it just keeps hanging on that logo =(. What should I do?
Also when i try and boot into safemode it hangs on "Classpnp.sys"
I've looked elsewhere and seen that people solved this problem by updating bios but I have the latest version of mine =(
I've tried EVERY boot option in F8 to no avail.
how to repair windows7 with DVD]
View 1 Replies View RelatedIt's my parents computer out in the living room, a Compaq Presario SR1135CL.
I installed an EVGA GeForce FX5600 Ultra to enable Aero and so that the computer will run at the monitors native resolution of 1366x768. The generics work fine, but then it only supports up to 1024x768 and no Aero.
Once I install the drivers and reboot the computer it goes to a blank screen after running through the boot screen. I ran updates and then tried it again with the same problem.
After a reboot it recommends startup repair, and startup repair reports that the problem cannot be repaired automatically.
I've installed in safe mode and in compatibility mode, almost any possible form of installing the drivers. I've tried doing it via Device Manager and pointing it to the directory that the installer package is extracted to, all with the same result.
It is important that I get this resolved because the computer is used mainly for work purposes and the low resolution of 1024x768 doesn't meet the requirements of the desktop real estate needed.
I'd like to preface this post by mentioning that I have searched these and other forums about this issue and have found people that have had similar problems, but I don't think they are explaining things properly/as clearly as they could be. I'm hoping that I could give a little more incite into what's happening.
My laptop has Windows 7 Ultimate x64. The power options are set to "High Performance" which means that the system never goes to "Sleep" whether it is plugged in or not. However, the display is set to "Turn Off" at 5 minutes on battery or 10 minutes while plugged in.
Here is the issue: After my system's display has "Turned Off" due to inactivity, I will hit a key or move my mouse to bring the display back. Sometimes (not all the time), the laptop display will remain inactive. However, I do have two external displays hooked up. When this problem occurs, I can see my cursor on the two external displays.
Now, in most posts, people say they fix the problem by restarting their computer. I've found a different fix that doesn't require a restart. I'm able to log into the system while the screen is still off (ctrl+alt+del, type in password, press enter). Once logged in, I can see my desktop on the two external screens, but not on my laptop's native display. I then hit ctrl+alt+del, and my laptop's native display returns from it's off state. I press esc and everything is back to normal.
I've seen this now on a couple of systems in the office. We all have generally the same setup:
Dell Precision M4500 Laptop
NVIDIA Quadro Notebook 880M on latest drivers
High Performance Power Option Enabled
Two External Monitors (one plugged directly into the VGA port on the laptop, another using a USB to DVI Adapter) - Monitors differ from laptop to laptop
Windows 7 Ultimate x64
Same patches, same software.
So I'm not sure what's causing this. I'm still attempting to recreate the problem. I have a feeling that it only happens when I lock my system and THEN the display turns off rather than the display turning off and the system locking itself. Not sure what difference that makes, but I'll keep testing it.
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies View RelatedOS Windows 7 ProOut of the blue, I started noticing that all the desktop icons were going blank, mouse freezing and now when I reboot, it locks up at the AUTO DETECTING USB MASS STORAGE DEVICES
Device #01 :
Device #02 :
I have checked all the USB things are connected properly, all cables etc. are in but no luck!I can vaguely recall seeing something somewhere during my travels over the PC something about a "media disconnected" and I am sure it was saying something like bigpond.qld.com.au ........... Not 100% sure though.
Earlier I was trying to fix a DCP latency issue and latencymon suggested I update my BIOS. I got the BIOS from Asrock directly. During the update I was given a BSoD and memory dump. The dump froze at 15 and I eventually turned off the computer. Upon rebooting I was unable to get a display.
So far I have reset the cmos, switched between gpu and integrated graphics, removed the gpu and other adaptors, let the computer stay off for 30min; all of which has not worked. When resting the cmos I used both the jumper switch, quick clear, and battery removal.
Dr. Debug shows no errors when starting the computer and it appears to continue cycling boots, despite the lack of error.
O.S - Windows 7 home premium x64
CPU - i5 3750k 4.2gz
Motherboard - Asrock Z77 Extreme 4
Gpu - MSI 550ti
SSD - Corsair Neutron Gtx 128gb
Ram - 2x 4gb 1600 9-9-9-24 patriots.
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.