BIOS Update BSOD No Display On Boot
Oct 19, 2012
Earlier I was trying to fix a DCP latency issue and latencymon suggested I update my BIOS. I got the BIOS from Asrock directly. During the update I was given a BSoD and memory dump. The dump froze at 15 and I eventually turned off the computer. Upon rebooting I was unable to get a display.
So far I have reset the cmos, switched between gpu and integrated graphics, removed the gpu and other adaptors, let the computer stay off for 30min; all of which has not worked. When resting the cmos I used both the jumper switch, quick clear, and battery removal.
Dr. Debug shows no errors when starting the computer and it appears to continue cycling boots, despite the lack of error.
O.S - Windows 7 home premium x64
CPU - i5 3750k 4.2gz
Motherboard - Asrock Z77 Extreme 4
Gpu - MSI 550ti
SSD - Corsair Neutron Gtx 128gb
Ram - 2x 4gb 1600 9-9-9-24 patriots.
View 4 Replies
ADVERTISEMENT
Oct 28, 2012
I recently bought a computer and it had an OS issue, so after some tinkering I was able to install XP onto it, then install 7. Everything went relatively smoothly. I had downloaded the drivers and updates from HP's website for my model computer. I went through and started installing them one by one. I came across the BIOS one and it said it couldn't install it. There was also a Windows update that wanted to install, but at the same time I had already moved to the next driver, a USB controller, and that one had completed it's installation and wanted to restart. I had stopped the Windows update and then prompted it to restart the computer.
It shut down and when it came back up, it brought up a black screen with some text, that then flashed blue for a split second, then turned off. I went to turn it back on, but there is no display now. I currently have a DVI-HDMI that is plugged into my laptop, but it says it can't recognize anything (though it had been doing fine before all of that). I do not have a Windows 7 disc. I had downloaded it from the internet and mounted it using Daemon Tools lite and all went smoothly, so I don't think that was the issue. I have a feeling that something went wrong. I've tried hitting F8, 9, 10, and 12 hoping that it would enter some mode and the display would reappear, but nothing. Do I need to burn Windows 7 to a disc and try it that way?
View 1 Replies
View Related
Aug 25, 2012
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies
View Related
Feb 5, 2012
I need to reset the cmos chip, I was wondering if I can remove the ram and hope the settings will reset and so forth.Can I just remove ram and wait 20 minutes or do I have to remove the cmos battery? Computer has no response.
View 9 Replies
View Related
Jan 25, 2012
Ever since I updated my bios after being advised to by a Ubisoft employee, my system occasionally crashes to a BSOD. Sometimes it happens twice a day, sometimes not for a week. I'm not sure what's causing it, but I'm rather bumped, because I love my current system. Attached you find my BSOD file (the health report is in Dutch, but hopefully you can manage).
My system specs:Windows 7 Ultimate 64 bit; Full retail version installed this a half year ago.The original windows was Vista, 32 bit which in turn was updated to 7, 32 bit. After installing extra ram I switched to 64.
View 3 Replies
View Related
Aug 19, 2009
Windows 7 works fine, except some things. But I wanted to reinstall it after I updated my BIOS from 1.1 to 1.8.
After it loads my working install dvd, it gives me BSOD with stop code 124
Its the same problem he has: windows 7 crash on install bsod stop 0×00000124 - Windows 7 Forums
But i'm in another situation.
Maybe I could downgrade my BIOS, but I don't know how. Or maybe ill just have to change a BIOS setting.
View 2 Replies
View Related
Jun 2, 2012
OS Windows 7 ProOut of the blue, I started noticing that all the desktop icons were going blank, mouse freezing and now when I reboot, it locks up at the AUTO DETECTING USB MASS STORAGE DEVICES
Device #01 :
Device #02 :
I have checked all the USB things are connected properly, all cables etc. are in but no luck!I can vaguely recall seeing something somewhere during my travels over the PC something about a "media disconnected" and I am sure it was saying something like bigpond.qld.com.au ........... Not 100% sure though.
View 1 Replies
View Related
Oct 25, 2012
I updated the Bios from toshiba site after that my windows won't start and I can't even get to Bios setup (F2) or Boot sequence (F12). and windows get stuck as soon it starts. I can't even access to Factory Restore. I have no image. For information I am using Toshiba Qosmio X770-107
View 11 Replies
View Related
Apr 28, 2011
I updated my BIOS as I was having a problem mentioned in one of the updates. I was using the Easyflash2 by Asus and the update succeeded but when it re-booted I got the awful news..boot mgr missing. Would my best bet be to just re-image?
View 7 Replies
View Related
Feb 6, 2010
After flashing the bios, my computer could not find the OS. The options displayed recommended that I try to repair the OS, so I made that selection with no joy. I went into the bios setup and found that it was no longer setup for my raid 1 drives, so reconfigured. When I did this, I missed setting the SATA 4/5 to IDE and went through the process again of trying to repair the OS. Once again, that did not work.
I went back into the bios and discovered my oversight, fixed it, but the computer still does not recognize my raid drives. The raid bios setup utility still shows a valid array. At this point, my assumption is that it doesn't recognize the array drive because the driver isn't loading, so I've tried to reload the drivers. The motherboard manual only describes how to do this when installing a new operating system and I do not want to lose my programs. Do you have any suggestions?
View 1 Replies
View Related
Oct 28, 2012
I have a desktop using a Gigabyte GA-Z68X-UD3H-B3 (revision 1) motherboard. Using the Gigabyte @Bios utility, I updated the Bios to F12. After rebooting as @Bios suggested, I can no longer get Windows to boot. I've noted the following:
1) I have issue accesing the Bios setup. Sometimes I can access it, sometimes I cannot;
2) When I am able to access the Bios, I can confirm the disk Boot Priority, however it's is now showing the drives as SCSI (I only have SATA drives);
3) There is a new setup screen displayed after the Gigabyte logo screen shows. This screen now shows 'Serial ATA AHCI, Version iSrc 1.20E.
Copyright (c) 2003-2008. Intel Corporation.
**This version supports only Hard Disk and CDROM drives. **
Please wait. This will take a few seconds.
Then shows Controller/Bus/Function/Port/Device and lists all harddrives. At the end of the drive list it shows 'AHCI Bios installed'
4. After step 3, it shows the prompt 'Loading Operating System' - the boot hangs at this point.I DID backup the existing Bios before updating it. I have not gone in and copied that file to a floppy to try and flash the Bios using the backup (don't know if this is possible).
View 3 Replies
View Related
Dec 1, 2012
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies
View Related
Jun 2, 2012
I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I wasn't expecting for the battery to die during the update, so I didn't plug it in.) Second time, booted it up (it was plugged in this time), and went into BIOS update once again. All's good, was able to use the laptop for about five minutes, then it crashed once again. Now, when I boot it up, nothing comes up on the screen. No nothing. The power button is on, the wi-fi is on, the LED light is blinking non-stop, more than 6 times than what is referred to the HP website.
I tried doing the remove battery and adapter, press power button for 30 seconds, plug it in without the battery, but to no avail. I also did the whole win+B, but doesn't work either. I tried pressing f11, but nothing comes up on the screen. I don't remember where I put the recovery discs that came with the laptop. I thought I put it on the box together with recovery discs for our other computers at home, but I guess I didn't. The thing is, I don't know where to begin, since I don't have anything on the screen itself. Not even a start-up logo or something.
View 4 Replies
View Related
Nov 30, 2012
I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies
View Related
May 11, 2011
CPU: i7 2600k 3.5ghz
MOBO: Gigabyte g1.Sniper 2
RAM: Corsair CL8 vengence 8gb (4x2)
SSD: Corsair Force 3 60gb (Windows 7 pro 64 bit installed here)
VGA: Sapphire 2gb 6950 x 2 (in crossfire)
HDD: Western Digital 2TB SATA 3 black
PSU: Corsair HX-1050W
Hi!
I have been having some troubles with this computer since day of purchase. The first BSOD I had was posted and resolved here: BSOD during battlefield 3. Previously, my computer would BSOD during game activity, such as battlefield 3. Elmer identified the probable cause being Avira, and sure enough when I attempted to delete it the computer BSOD; I managed to delete it in safemode and have had no BSOD's during game sessions ever since. However, lately I have encountered random BSOD's during Windows update and System start up (Just before the windows logo screen) of the same error code; I have posted the DMP file and CPUz screenshots. I think it is also worth mentioning that in games I have noticed stuttering no matter what graphical settings I set it to.I am having difficulty tracking down the Hardware responsible for this BSOD; I have run memtest overnight and it passed without fault. Could the 60gb Force 3 SSD be responsible? Or the RAM?
View 5 Replies
View Related
Dec 4, 2011
I was updating video driver for radeon 4750 through Steam and all of sudden I got a bsod.. should've wrote it down but instead I just tried to restart. It freezes during windows logo screen and when I try to boot on safe mode it gets stuck loading atipcie.
View 5 Replies
View Related
Jan 19, 2011
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies
View Related
May 11, 2012
As I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
View 9 Replies
View Related
Sep 16, 2012
The first one is the BIOS boot up screen that usually leads me to Windows. A few months ago, this vanished. I don't know if it was due to a version of Windows 7 i installed or something but whenever I turned on the PC, the screen would appear blank for a few minutes then go straight to the Windows welcome screen. I thought it was weird, but I didn't see a problem since it went to Windows so I disregarded it, which looking back is kind of dumb but I didn't want to risk doing something to the computer in the process.So a few weeks ago I was trying to partition the hard drive so I can install the Windows 8 preview on it, rebooted the computer and...nothing. It wouldn't take me to Windows to there's clearly a problem with the hard drive. I could always get a new one, but there's still the problem of the vanishing BIOS screen.
View 13 Replies
View Related
Nov 14, 2011
About a month ago, one day when I turned my computer on, the BIOS display side had shrunk, leaving a 1 inch black border around the edge of the screen. This went away when I turned the computer on the following day, but has now come back. It doesn't seem to have any other adverse effects, but it bugs me. Can anyone explain why this might be and what I could do to make my BIOS full screen again?
View 3 Replies
View Related
Apr 8, 2011
Everytime I try to update my BIOS on my laptop I get this error: BIOS update failed!New Bios is not compatible with the current system BIOS. New BIOS part number doesn't match system BIOS part number. Error Code: -120See the for troubleshooting
View 5 Replies
View Related
Jul 16, 2011
So I updated my bios today from 1.7 to 1.A. When the system restarted it goes to Windows 7 with a black screen that says "C: windows system 32configsystemprofiledesktop Refers to a location that is unavailable". From here I have all of the basic buttons but I cannot access anything. I get an error even trying to run regedit. My system ran fine before the bios update. The system setup is as follows: 50GB SSD with Windows 7 installed only..4x 500GB HDD in Raid0 with all user profiles and default save locations set to it.
2x External drives (not to important here just run Ubuntu and a spare drive)When I set the system up I changed all of the registry settings so that windows automatically saved everything to the Raid0 drive. Everything is still on the drive as it has been unchanged but Windows fails to find the desktop settings now.When I looked in the system profile folder there was no "desktop" folder there. I manually created one and got some of my shortcuts on the desktop back but everything is still missing. At system launch I edited all registry settings to point to drive D: as the primary. Maybe something changed there?
View 5 Replies
View Related
Jul 8, 2010
i wanted to know i can update my win 7 and also my bios
View 7 Replies
View Related
Oct 1, 2012
I have an .ROM file I would like to "try before I buy" so to speak. Is there anyway to safely emulate a BIOS update?
View 9 Replies
View Related
Apr 14, 2011
I'm trying to find an update for the P5Q motherboard and I'm having a hard time trying.
View 1 Replies
View Related
Jun 17, 2011
I have a 435mt mobo in a custom rig. Anyway, my problem is that I need to update the bios. I download the executable to "flash" update my bios from Dell.com but it crashes.
View 7 Replies
View Related
Oct 8, 2012
How to update gigabyte bios
View 2 Replies
View Related
Dec 25, 2012
Toshiba sent out a bios update. upon download and install I started getting conflicts. I discovered that this manufacturer update installed 32 bit bios into a 64 bit. Where can I get a download to correct this bio fail?
View 1 Replies
View Related
Oct 29, 2012
I updated my bios on my windows 7 computer. now its telling me i have one day to actvate windows 7. I try to actvate it online but it doesnt work. and the phone busy.
I have a full copy of windows 7 so it should actvate. this is very depressing 1 more day and i wont have a dvr, gaming system and computer. i wont even be able watch cable without ceton card working.
View 2 Replies
View Related
Nov 17, 2009
How to find out my bios version and update it? Or to look to see if there are any updates available.
View 6 Replies
View Related
Dec 20, 2012
it was working before the BIOS Update My Board is Intel DG31PR Updated to the [URL] and i dont remember the old BIOS version?
View 2 Replies
View Related
