I have a 64 bit home premium and am trying to shave a few seconds off the startup time. I want to disable the animated logo at startup so I started msconfig>boot tab> checked the "no gui boot" box but the animation is still there!
have done a few internet searches on this one, but the things to try that i have come across have not worked in reinstating the nice animated windows logo on start up of windows 7. I appear to have lost it after doing a windows system restore and am now left with the very dull green progress bar which is low res and boring!!
As i say i have tried the bcdedit and bcdboot commands that are listed on many sites as resolving this issue.
Last night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
i have a desktop computer i used it to install Windows 7 ultimate x86 and i have a laptop i used it to install Windows 7 ultimate x64 the desktop and laptop both support x64 systems, i cloned both computers with Norton ghost and when i restore the cloned image to it's own computer it works with no problem but when i try to restore the image from my laptop to my desktop computer or the image from my desktop to my laptop windows boot but freeze at the animated windows 7 logo screen? i tried to generalize the system with sysprep but i failed cause my computer want start after i used sysprep?
I was wondering if there is any way to change the windows 7 start up logo. Right now when I boot up windows 7 it shows the vista like start up. Is there any way to change it to the new windows 7 startup logo?
I upgraded to windows 7 ultimate 32 bit Dual boot windows xp home edition and windows 7 ultimate I have a dell dimension 2400 with onboard graphics (Intel 82845G) 60.5 mb graphics memory
I've had my computer for about 2 months now. Running windows 7 premium and recently when I boot up my computer, after it displays the bios menu, it skips the windows logo screen and goes straight to the welcome screen. I haven't noticed any issues other then this however I did notice strange noises when I booted up and first noticed the logo was missing. I've checked the menus and different options to turn off the logo but there all set to display it. I ran the system file checker and that came back clean as well.
Could it be a gpu issue or a motherboard issue? I did install skyrim recently and it reinstalled directx11 and made a new microsoft c++ file. I am thinking that could be it too. other then that im pretty much out of ideas. there was a few other programs I installed too. evga precision, fraps, nvidia system tools, nvidia system monitor. I restored my system to a point before installing these programs so it cant be those but it hought id add em to the list anyway just to be safe. I didn't however restore to before getting the new C++ file
I installed a new SSD disk the other day, enabled AHCI and changed boot order so that the SSD was first and then booted with my Windows 7 DVD where I deleted the previous Windows installation that was on my regular HDD so that it became an unformatted drive. Then I installed Windows onto the SSD.
Now, sometimes when I boot my computer it reboots on the Windows logo only to go to recommend Startup Repair, but it works when I choose to boot normally this second time. Don't tell me I have to reinstall Windows just because I didn't unplug my two other (unformatted) drives when installing on the SSD?
My desktop is freezing every time at the startup logo when switched on..it was working perfectly for the past one month.. when i restart the system it asks whether to start normally or start with the system repair.. but even after giving any of the above option the system still gets stuck..
Processor : AMD Phenom x6 1055t mother board : Asus Asus M4A88T HDD : 1 TB seagate Barracuda RAM : 4 Gb kingston + 2 x 4Gb adata = total 12 GB Graphics card : ATI radeon HD 6970 PSU : Cooler master 650w
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
My computer specs:[CODE]I installed windows 7 ultimate 64bit on the hard drive with a different computer. But when I connect it to this, it freezes and stalls at the windows 7 loading/logo screen, and restarts.It is frusrating because i cannot use the computer
I have Dell latitude e4200 and i want to remove company's logo which appears when i turn on the laptop. i am not talking about the windows logo.but this one comes before that at the very starting of the computer.
My Gigabyte startup logo is now taking over 20 sec to complete, where as when the pc was new it flashed so fast it was unreadable. Is this reason to be concerned? Is it wearing out...lol, or need flashing or ....?
Now, everytime that I start up my computer, this pop-up of "HP solutions" is on the desktop showing my ink levels. I have Windows 7 64bit. Is there a way to disable that notice?
I currently have only 1 user on my system which is myself & it does not have a password, until recently it booted to desktop without any problems & then out of the blue, which I think after a bunch of windows updates I am now presented with the user select screen which I have to click to load into the desktop. How can I disable this as I have looked at the user controls & everything else I could remember to check & every time I reboot or boot up it goes to the user login screen which I only need to click because I don't use a password.
My PC, EVERY time I cold boot, I get a blue screen on or before the Starting Windows screen. I have taken a wild guess that this is my video card or my mainboard because I remember seeing an "nv" in one of the errors a long time ago and I have dual 9600 vid cards and an NForce mainboard. This has happened since the PC was brand new, running Vista 64, but I never cared because after letting the box literally warm up, I can boot and reboot fine and everything. I am totally OK with this problem even though I have tried to fix it unsuccessfully without putting too much effort into it because I don't want to work on this all day ever as long as I can boot. It's cool. That has very little to do with my question though, but I am just presenting it as the cause, but I require any suggestions on fixing it the bluescreen. Its part of my life now, and I would probably feel weird without it at this point.
The actual problem is that i usually turn the PC on, walk away, come back in a few min to a bluescreen and then reboot, walk away again adn and Vista would come right up and be ready when I got back. Windows 7, after a failed boot, will kindly and with the best intentions assume that i want to fix that problem and will select Windows Startup Repair as the default boot option. I need to physically wait for this prompt and pick Start Normally. If I don't my PC is yelling at me for trying to cancel Windows Startup Repair because I know it can't find the solution to my problem, nor do I require it to fix that problem. I often forget to wait for this prompt and it slows down my normal workflow and cuts into my routine.
How can I select Start Normally as the default option after a failed boot? If I need to run Startup Repair, i will most likely make myself available to select it from the prompt. I don't see anything in Startup options and haven't had to manually configure a boot option via text file since Windows 98 so I'm not even 100% sure where to begin where to look.
I have a program called mscorsvw.exe that always runs at startup and it runs about 4 ngen.exe files along with it. This really lags my startup time to about another 5-10 seconds. Anyway to disable it or why this is happening?
Basically i have an early 2006 iMac (Core Duo T2400) That I have wiped Macintosh from and installed Windows 7. However, I forgot to disable the startup chime before doing so. This is done in the Mac OS easily, but that doesn't work in Windows. I tried booting the installation disk and muting from there, but that doesn't work.
I just bought a New Asus x54c notebook, There are some problems i m encountering 1st: my synaptics pointing device driver is automatically disabled at startup .I have to manually start it from Devices and Printers<Mouse Settings. After that it completely works fine. When i bought the laptop it was working fine ,maybe CCleaner did something , i double checked the startup items, its enabled. I checked at MSCONFIG too ..enabled. Cant find anyhting wat to do.
I'm trying to get the animated boot screen to work on my home theatre PC, after scouring what feels like the whole of the internet, I can't find a solution to get it to work, and I'm stuck with the Vista scroll bar. I am using an Asus M4A785D-M Motherboard, however I have disabled the onboard graphics and am using an external card (Radeon 4350). This is plugged into my home theatre receiver which in turn is plugged in to my Sony LCD TV (1080p).
I have tried the following commands: bcdedit /set {current} locale en-UK and bcdboot %WinDir% /l en-US
In the command prompt. I have also tried a repair installation over the original which has not worked. I've also fiddle with a number of different BIOS settings without any luck. The resolution on the screen seems to be downgraded when the animated boot screen appears (i.e. it was 720p and then goes down to 480p), which seems odd.
Just how many people out there miss the animated network icons on the taskbar present in older Windows systems upto and including Vista?
I mean the icons are very nice and all but surely it wouldn't have took much to add some animation. It is kind of nice to see that you have activity going on without opening a browser to convince you. Also it was easy to see if there was activity going on that shouldn't be. There has been many a time I have used it as a first step to discovering dodgy background tasks.
I just installed windows 7 pro (clean install from Microsoft's student upgrade program) but it boots with the old vista boot screen! I want the windows 7 boot screen! All the other posts I found on this usually had to do with BCDedit which I have tried but they didn't work. I already checked msconfig and "no GUI boot" is not checked.
Is there a way to add your own animated boot screen to Windows 7 startup? I know it was possible to change the picture on older versions, but this was only a static image.
I can't seem to figure out how to set an animated gif as my desktop wallpaper in windows 7 so that it will work properly. Normally it just treats it as a still image, though it used to work on windows XP. Any programs out there that will make it work or any way to change this without the use of programs?
Does anyone know if there are any animated icons for the connection like we had in Vista and the older systems? At the moment I'm talking about the wired connections not the wireless. I did see a little bar graph for it.
After I installed Windows 7 64 to dual boot with Win732, and fixed the boot menu to show both options (thanks to those of you that helped with that), I somehow lost the animated boot screen splash. I now have the "Vista" green bar.