Reboots At Windows Logo And Goes To Startup Repair With New SSD?
Feb 8, 2013
I installed a new SSD disk the other day, enabled AHCI and changed boot order so that the SSD was first and then booted with my Windows 7 DVD where I deleted the previous Windows installation that was on my regular HDD so that it became an unformatted drive. Then I installed Windows onto the SSD.
Now, sometimes when I boot my computer it reboots on the Windows logo only to go to recommend Startup Repair, but it works when I choose to boot normally this second time. Don't tell me I have to reinstall Windows just because I didn't unplug my two other (unformatted) drives when installing on the SSD?
View 9 Replies
ADVERTISEMENT
Feb 10, 2012
My system was working really gr8 till last week.. and one fine day, i had done some updates for my win7, then it asked me to reboot and as i did.. i got the boot screen and i selected win7 and i got win7 logo blinking.. and then it again rebooted.. and this time it went to startup repair.. after i run startup repair, luckily i had some restore points.. and after i restored my system.. everytime till now , it goes to startup repair everytime i boot my system ..win7 still asks to get updated and everytime i do it or without updating also it goes to startup repair and again i restore.. it is like a loop
View 2 Replies
View Related
Aug 29, 2012
My PC reboots its self after windows logo I have got it to work before by doing a system restore but I would have to do it twice to get it to work. I have a mini dump which I will upload.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:2057
Additional information about the problem:
BCCode:124
BCP1:0000000000000000
BCP2:FFFFFA8007D327F8
BCP3:0000000000000000
BCP4:0000000000000000
OS Version:6_1_7601
Service Pack:1_0
Product:256_1
Files that describe the problem:
C:WindowsMinidump - 82812-24913-01.dmp
C:UsersAdminAppDataLocalTempWER-38563-0.sysdata.xml
Read our privacy statement online: [URL]
If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
View 2 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Apr 24, 2011
Have a windoes 7 laptom that got the win 7 home security virus...during manual extraction, exe extensions no longer work, now constant reboot loops even going into safe mode...
View 5 Replies
View Related
May 16, 2011
I've just moved from WinXP Pro to Win7 Ultimate with a clean* install and am getting strange rebooting behavior sometimes.
I've read the post "Random reboots in Windows 7 x64 - PSU issue?" but other OSs on my computer don't have a problem and I don't know enough about win7 boot mechanics. I've also run memtest enough to know it's not my memory.
Striker II NSE w/ Q9450
8 GB 1333 ram (4x2GB)
*My system is dual-booting with linux and linux runs very well with no crashes or rebooting. One thing though is that I can't install the Win7 service pack x64 because it's complaining about being unable to access the System Partition. Probably because I overwrote the MBR with linux for dual booting purposes, and yet half the time windows starts just fine.
It seems to happen only during startup or shortly thereafter. If I can make it 60 seconds past login then it seems to be okay.
View 1 Replies
View Related
Dec 27, 2012
Well, when I first start the computer the next day it restarts itself a few minutes after loading windows, then I go into safe mode and restart back to normal mode and the computer runs fine afterwards. It happens almost every time(on rare occasions it works fine) when I first start up the computer. It use to lock up instead of rebooting but that was solved when I uninstalled AVG anti-virus scan, so I have no idea whats happening.
View 1 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Dec 8, 2011
I have a Windows 7 installation that I seem to be in an 'endless loop' on. First off, if I just let the system reboot, it comes to the windows 7 splash screen and then reboots again. This will happen endlessly if I let it.If I hit F8 during boot up, I do get the Windows 7 menu. I have tried using the 'repair' options, but they don't succeed in solving the problem. I have tried going into Safe Mode and that also reboots after getting to the 'CLASSPNP.sys' driver (at least that's what it displays on the screen).
So I thought I would just 're-install' Win 7. I boot from my Win 7 DVD, and my options are 'upgrade' or 'clean install'. If I do 'upgrade', the DVD tells me that I need to start Windows first and then run Upgrade. Of course, I CANNOT do that since Windows 7 won't start! I'm afraid to do CLEAN INSTALL as I don't want to lose all the files
View 1 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Mar 2, 2011
I was wondering if there is any way to change the windows 7 start up logo. Right now when I boot up windows 7 it shows the vista like start up. Is there any way to change it to the new windows 7 startup logo?
I upgraded to windows 7 ultimate 32 bit
Dual boot windows xp home edition and windows 7 ultimate
I have a dell dimension 2400 with onboard graphics (Intel 82845G)
60.5 mb graphics memory
View 4 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Jun 20, 2012
I have a 64 bit home premium and am trying to shave a few seconds off the startup time. I want to disable the animated logo at startup so I started msconfig>boot tab> checked the "no gui boot" box but the animation is still there!
View 7 Replies
View Related
Nov 12, 2011
I've had my computer for about 2 months now. Running windows 7 premium and recently when I boot up my computer, after it displays the bios menu, it skips the windows logo screen and goes straight to the welcome screen. I haven't noticed any issues other then this however I did notice strange noises when I booted up and first noticed the logo was missing. I've checked the menus and different options to turn off the logo but there all set to display it. I ran the system file checker and that came back clean as well.
Could it be a gpu issue or a motherboard issue? I did install skyrim recently and it reinstalled directx11 and made a new microsoft c++ file. I am thinking that could be it too. other then that im pretty much out of ideas. there was a few other programs I installed too. evga precision, fraps, nvidia system tools, nvidia system monitor. I restored my system to a point before installing these programs so it cant be those but it hought id add em to the list anyway just to be safe. I didn't however restore to before getting the new C++ file
View 2 Replies
View Related
Aug 9, 2012
My desktop is freezing every time at the startup logo when switched on..it was working perfectly for the past one month.. when i restart the system it asks whether to start normally or start with the system repair.. but even after giving any of the above option the system still gets stuck..
Processor : AMD Phenom x6 1055t
mother board : Asus Asus M4A88T
HDD : 1 TB seagate Barracuda
RAM : 4 Gb kingston + 2 x 4Gb adata = total 12 GB
Graphics card : ATI radeon HD 6970
PSU : Cooler master 650w
View 6 Replies
View Related
Jan 1, 2013
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
View 8 Replies
View Related
Mar 26, 2012
I have Windows 7 on Intel D945GPM MB, 3 GB RAM. System always reboots itself several times duing startup (3-4 times, including 1-2 BSOD). Took 4-5 minutes. After 3-4 times, Windows 7 loads normally, then I can use it the whole day without any problem what-so-ever.
After I shut it down or go into hibernate, then I have to repeat this multiple reboots again each time.
I read extensively about it. If it is driver or hardware issue, I don't understand why it ends up stable after 3-4 times. I don't have any problem with any problem with devices after Windows loads up eventually. The reboots only happens during startup.
Safe mode or Windows repair does not make a difference. I tried them all. It is so strange. I just have to wait for system to reboots itself 3-4 times.
View 1 Replies
View Related
Jun 9, 2012
So my computer starts out logging on, sometimes it'll take a long time on the splash screen, sometimes it'll freeze on the splash screen, but now more recently, it's just gotten to the splash screen, not turned off, and restarted itself back to the start screen. It comes up with the problem of Windows not shutting down properly and asks for system repair or normal startup, but system repair doesn't help at all because it gets to the background screen and system repair doesn't pop up.
View 4 Replies
View Related
Jun 17, 2012
My computer specs:[CODE]I installed windows 7 ultimate 64bit on the hard drive with a different computer. But when I connect it to this, it freezes and stalls at the windows 7 loading/logo screen, and restarts.It is frusrating because i cannot use the computer
View 5 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Dec 16, 2010
I have Dell latitude e4200 and i want to remove company's logo which appears when i turn on the laptop. i am not talking about the windows logo.but this one comes before that at the very starting of the computer.
View 6 Replies
View Related
Mar 1, 2012
My Gigabyte startup logo is now taking over 20 sec to complete, where as when the pc was new it flashed so fast it was unreadable. Is this reason to be concerned? Is it wearing out...lol, or need flashing or ....?
View 9 Replies
View Related
Aug 17, 2010
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
View 9 Replies
View Related
May 18, 2011
Whilst looking for a keygen for Microsoft Office 2010, I must have got a bad file.. yay. When I clicked on the app, my computer immediately went to the Startup Repair window and has been relentless. I've tried opening in SafeMode thru F8 for a system restore, no good. And attempted to start windows normally through F12.
Finally, the Startup mode is over and I'm attempting to turn it back on ... and we're right back into Startup Repair.
View 1 Replies
View Related
Jul 30, 2012
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies
View Related
Aug 13, 2011
Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
View 3 Replies
View Related
