I have a program called mscorsvw.exe that always runs at startup and it runs about 4 ngen.exe files along with it. This really lags my startup time to about another 5-10 seconds. Anyway to disable it or why this is happening?
View 8 RepliesIs this program always supposed to be running?Ive read it's supposed to go away after awhile but it has yet to do so.
View 4 Replies View RelatedAfter looking through almost all of the forums regarding this "mscorsvw.exe has stopped working" error, I now require the help of Tom's geniusses. My PC was on yesterday not in use and I was busy working on a friend's computer. I needed a mouse so I just unplugged mine. A while later I plugged mine back in, and it wasn't long before I started getting this error. Also, together with this error, the windows cpu performance gadget also disappeared.
Now I have read that mscorsvw.exe is part of the .NET framework and that many people complained about it using cpu and memory resources. This is not the case with me. mscorsvw.exe isn't in my task manager at all.(Quite obvious seeing as it has stopped working) My problem is that this error pop's up non-stop. Even if I just minimize the message, a new one will come up.I have done a system restore to before yesterday and I have run some app from a microsoft forum which told me nothing is wrong.
Recently this few days after an MS update I think, I've been getting popups regarding a process mscorsvw.exe attempting to connect to the internet from my firewall s/w. It happens often when the pc is idle - I see the alert when I get back.
Some checking on my side said that mscorsvw.exe is a .NET process but I've never had any security alerts from this process at all before. The method given to disable it aren't relevant now.
I find it annoying and I don't like any background processes accessing the internet in general. Is there any way to shut it down or cut down the number of times it spins up on its own?
This tutorial will show you how to disable softwares that startup together with windows. This will make windows startup faster.
View 0 Replies View RelatedNow, everytime that I start up my computer, this pop-up of "HP solutions" is on the desktop showing my ink levels. I have Windows 7 64bit. Is there a way to disable that notice?
View 5 Replies View RelatedI have a 64 bit home premium and am trying to shave a few seconds off the startup time. I want to disable the animated logo at startup so I started msconfig>boot tab> checked the "no gui boot" box but the animation is still there!
View 7 Replies View RelatedBasically i have an early 2006 iMac (Core Duo T2400) That I have wiped Macintosh from and installed Windows 7. However, I forgot to disable the startup chime before doing so. This is done in the Mac OS easily, but that doesn't work in Windows. I tried booting the installation disk and muting from there, but that doesn't work.
View 7 Replies View RelatedI currently have only 1 user on my system which is myself & it does not have a password, until recently it booted to desktop without any problems & then out of the blue, which I think after a bunch of windows updates I am now presented with the user select screen which I have to click to load into the desktop. How can I disable this as I have looked at the user controls & everything else I could remember to check & every time I reboot or boot up it goes to the user login screen which I only need to click because I don't use a password.
View 9 Replies View RelatedMy PC, EVERY time I cold boot, I get a blue screen on or before the Starting Windows screen. I have taken a wild guess that this is my video card or my mainboard because I remember seeing an "nv" in one of the errors a long time ago and I have dual 9600 vid cards and an NForce mainboard. This has happened since the PC was brand new, running Vista 64, but I never cared because after letting the box literally warm up, I can boot and reboot fine and everything. I am totally OK with this problem even though I have tried to fix it unsuccessfully without putting too much effort into it because I don't want to work on this all day ever as long as I can boot. It's cool. That has very little to do with my question though, but I am just presenting it as the cause, but I require any suggestions on fixing it the bluescreen. Its part of my life now, and I would probably feel weird without it at this point.
The actual problem is that i usually turn the PC on, walk away, come back in a few min to a bluescreen and then reboot, walk away again adn and Vista would come right up and be ready when I got back. Windows 7, after a failed boot, will kindly and with the best intentions assume that i want to fix that problem and will select Windows Startup Repair as the default boot option. I need to physically wait for this prompt and pick Start Normally. If I don't my PC is yelling at me for trying to cancel Windows Startup Repair because I know it can't find the solution to my problem, nor do I require it to fix that problem. I often forget to wait for this prompt and it slows down my normal workflow and cuts into my routine.
How can I select Start Normally as the default option after a failed boot? If I need to run Startup Repair, i will most likely make myself available to select it from the prompt. I don't see anything in Startup options and haven't had to manually configure a boot option via text file since Windows 98 so I'm not even 100% sure where to begin where to look.
I just bought a New Asus x54c notebook, There are some problems i m encountering 1st: my synaptics pointing device driver is automatically disabled at startup .I have to manually start it from Devices and Printers<Mouse Settings. After that it completely works fine. When i bought the laptop it was working fine ,maybe CCleaner did something , i double checked the startup items, its enabled. I checked at MSCONFIG too ..enabled. Cant find anyhting wat to do.
View 8 Replies View RelatedEver since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View Relatedi used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedI have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
My hp dv3t has been giving a message about checking a disk for consistency every time I reboot(ed) for about a week now, but today it froze after the countdown reaches zero (for bypassing the procedure)�nothing I do can get it past this step. What do I do? I tried booting from Safe Mode, it listed a bunch of drivers but then froze.I'm using W7 64-bit Home Premium.
View 3 Replies View RelatedTrying to disable some of the bloatware that came with my HP G62, as well as disable unneeded auto-updates, and have been blocked from doing so.Ran msconfig, startup entries... Unchecked, hit "apply" and they just become checked again. (Ran as administrator on admin account)Tried "Tuneup Utilities." Same effect.Have been trying to disable Yahoo Messenger from starting and it just keeps on starting.I have unchecked the startup box in the pref dialog of the prog.Is my admin account not really admin? (No other accounts on the computer)
View 8 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 240 Processor, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 2815 Mb
[code]....
Antivirus: The Shield Deluxe Antivirus, Updated and Enabled DISPLAY MODEL: All I got with it was mouse and power cord On Startup, I get icons for the Administrator and Standard user. Clicking on the Administrator gives me a desktop with an on-screen keyboard; the computer keyboard disabled, and a panel saying,"FAILED, The application has failed to start." Going back and clicking on the Standard User icon gets me running for the most part. Here's the BIG problem. Every time I try to install any program, the User Account Control box drops down and asks for the Administrator Password, plus the question,"Do you want to allow the following programs to make changes to your computer?" You click "Yes", but, since no one is in the Administrator office, your installation comes to a halt. This blocks "Install" and "Uninstall". I get lots of messages I need Adobe Flash Player. I've trie over and again to install it, going to Windows 32 bit, but can't uninstall my previous tries. It will always download, and that's all. I've tried to install my digital camera's CD, but can't.
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies View RelatedI am running Windows 7 Ultimate 64-bit.
I have CPU-Z, Hardware Monitor Pro and Resource Monitor shortcuts in the startup folder.
If I go to MSCONFIG I can see that the items are there to be started during startup.
What am I doing wrong that will not allow these programs to start up?
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies View RelatedIE9 AND 8 has been causing problems on my PC with regards to Adobe Flash player.So I now use Chrome and have no problems with flash player, but when I try to view records in family tree maker software it try's to open widows with IE not Chrome, although Chrome is set as default.It then asks to install flash player again. So I wondered if it is possible to disable IE.
View 5 Replies View RelatedI have Windows Virtual PC running Windows XP in windowed (not full-screen) mode.
One of the custom applications that I run in the Virtual PC makes heavy use of F1 key, however every time I press it, in addition to that program's functionality "Windows Virtual PC" help comes up as well!
Is there any way to disable the help or make it so that F1 pressed inside virtual PC does not call it ?
is it possible to disable MP3 files from downloading ?
View 3 Replies View RelatedI want to know how to disable the TCP on my windows 7 ?
View 4 Replies View RelatedI have a turned off the bit locker service as shown below.But still I am getting Bitlocker message while opening any drive from my computer...
View 1 Replies View RelatedI have a Dell laptop model 1720. I have tried every suggestion made by numerous posts to google but I'm unable to disable my touch pad. Nothing seems to work. Dell had told me the only way to do this would be to return to factory settings. I originally purchased my computer with Vista and recently upgraded to Windows 7. With Vista, disabling the touchpad only required entering a check in a box. Now that I have Windows 7 the options are different. 'Touch Pad Pal' doesn't work at all.
View 7 Replies View RelatedShould I disable Superfetch if I have a solid state disk (SSD)?
View 6 Replies View RelatedI recently just upgraded my MBP with an OCZ Agility 3. Nice little SSD with some nice speeds. At the same time, I also upgraded my RAM to 2xDDR3 4GB chips. The thing's quite the beast for a little MBP.Anyway, I've been hearing that you have to disable indexing whenever your running Windows on an SSD. Is this true? Something about how the SSD's speeds are so fast that you can do without it. I have not a clue and that's why I'm moving the the SF community.
View 3 Replies View RelatedI'm on an Asus laptop Windows 7 64bit and the shortcuts on the "f" keys like brightness, volume, and other little things require me to press fn+f10 for example to mute.Is there a way so I dont have to press the "fn" key to use the "f" key shortcutLike on Macs?I am not the most tech savvy so if there is a simple tutorial or instructions tha
View 2 Replies View RelatedI know its probably the most asked Windows question there is, but has any one found a way to disable tooltips entirely? I've done the easily found registry edit ShowTipInfo for Explorer - doesnt change anything for me, ANYWHERE. I still get tooltips in IE.They're driving me nuts and are now appearing in the weirdest locations sometimes - namely the TOP of my screen. - for no apparent reason, I certainly didnt (knowingly) change anything.
View 6 Replies View Related