have an older dv camera (JVC GR-DVL820EA) and would like to run it on py dual core pc with windows 7 professional. I installed my video editing software and a new firewire card and when booted it up said it couldn't install driver. Later on it said that this version of windows doesn't support firewire.
View 1 Replies
i can't find s-link SL-P131 firewire card driver on internet.
View 1 Replies View RelatedI was wondering if there is a firewire card for windows 7 and what the number is of it and where I can find one. Need it to download video from JVC camcotder.
View 1 Replies View RelatedI have a HP built box that I purchased less than a year ago. The hard drive died, along with the motherboard.I purchased a new hard drive and the full version of Windows 7 Home Premium 64bit and had the shop replace the MB, Install the new hard drive and O/S.The motherboard is an ASUS M4A785-M, with an on-board Realtek PCIe GBE Family Controller (according to Windows Device Manager).I have a couple of additional cards installed, one is an eSata controller for an external hard drive and the other is a SIIG DP FireWire 800 3-Port PCIe card.I initially installed the SIIG because the FireWire chip set is Texas Instruments, because I have a PreSonus Firestudio Mobile (sound card, recording hardware)and it only plays nicely with Texas Instruments. The SIIG card shows up in Device Manager under IEEE 1394 Bus host controllers as "Texas Instruments 1394 OHCI Compliant Host Controller", which I "assume" is correct?
My problem is the PreSonus hardware refuses show up in Device Manager or initialize (there is an indicator light on the front of the unit that will glow blue when it is connected or flash blue-red when it isn't). PreSonus has a driver set for the Firestudio Mobile, that is called Universal Control.I have attempted to install Universal Control several times, but each attempt has resulted in failure, with the Driver version showing 0.0.0 etc. I realize this is the problem, but I have no idea how to force the issue.If I could get the PreSonus drivers to install, I would be home free (I think).he PreSonus hardware should show up in Device Manager under Sound, video and game controllers, but it doesn't.I have also posted about the issue on the PreSonus forum, but haven't had any solutions posted.This computer and the hardware are what I use to run my Recording Studio and without the Firestudio, I am effectively out of business.I should also note, that I haven't even installed any other software beyond windows 7, other than a couple of utilities. Not even my DAW or the drivers for my peripheral midi devices.
I have a new computer running Windows 7. It is functioning well, apart from the firewire card not being recognized. Pages on the web offering advice on this kind of problems start their solutions with going to the device manager and expanding the "IEEE 1394 Bus host controllers" node in the device tree. Only I don't have such a node. How can I get the "IEEE 1394 Bus host controllers" node to appear in the device manager?
View 6 Replies View RelatedI am having trouble getting the Firewire to work on this card in 7 Ultimate. I tried using legacy drivers and none work. Does anyone have any input?
View 3 Replies View RelatedMy motherboard doesn't have firewire, and for the life of me i can't find a single expansion card that has an internal pinout that I can connect the cable for my front firewire port to. The closest I found was not low-profile compatible.and this is for the computer in my description, but on monday I'm switching out the case for a low profile hec 7K09 HTPC case.
View 6 Replies View Relatedi am looking for pci firewire ieee 1394a card drivers for windows7
View 2 Replies View RelatedI just realized that stereo output is inverted (L&R are swapped) on my Realtek front panel headphones connector and on my M-Audio Firewire card. Output is OK on Realtek rear main/front speakers connector.
View 1 Replies View RelatedI had windows 7 32bit home and ran into problems so I decided to install the 64bit version and it was working good then all of a sudden the computer turned off, it was like a bsod with no blue screen, the computer restarted and booted into the old 32bit version, I thought a windows install formats the hard drive, why is the old version on there? How do I get rid of it
View 2 Replies View Relatedi couldn't find dell n5050 laptop webcam driver
View 1 Replies View Relatedwhen it comes to this kind of stuffs, so if you would be kind enough to make your responses "Newbie friendly".My current driver is Nvidia Quadro NVS 135M and i would like to change it to Geforce 6600 or something higher. But i would go with 6600. So if someone could provide me a step-by-step process on
View 2 Replies View Relatedhow to instal graphic card in dell n5110
View 2 Replies View RelatedI have a sony PC and keep on getting blue screen and sugestion is to install a driver for memoy card reader
View 1 Replies View Relatedmy pc cannot identify memory cards.
View 1 Replies View RelatedI have Sony Laptop VGN-AR 870 Windows 7 x64. Using NVIDIA GeForce 8600M GT. I want to update to the newest version available for my graphics card, which is Version 280.26 but when I go through the setup it says "This graphics dirver could not find compatible graphics hardware". Well what the hell does that mean? I went to NVIDIA's website and downloaded this driver specifically for my 8600M gt card.
View 7 Replies View RelatedSo My new Windows 7 Home Premium 64 bit PC doesnt seem to want to sleep. I'm away to work for a day at a time and when I get home the PC is up and running.I found this article:Windows 7 will not sleep or not sleepingwhich indicates to update driver, particularly the video card driver. I go to the vendor site and download the newest driver. I go to Device Manager open Display Adapters and find my card, double click on that and I'm in the properties. The driver date is 9/2010 so there is definitely a newer driver. Click on update driver/search on computer and navigate to the folder where I downloaded the new driver. I click next and get "Windows has determined that the current driver software for the device is up to date" and thats it, no apparent way around.
View 2 Replies View RelatedUp until now I've never used the SD Card reader in my laptop, but now I want to use it however it's not showing up under My Computer. I have downloaded the 'MS Hotfix MemoryCard' listed under Software (which only appears for WinXP) here: Support for NP-R519
But when I try to install (Running as Administrator), the command prompt flashes for a second then nothing happens. I've tried restarting anyway in case it had installed but my SD card is still not recognised. I've also tried running in compatibility mode with WinXP SP2 and Vista SP2 - no luck.
This card reader apparently is SDHC compatible, but my card is only 2GB anyway so its 100% compatible. I've done a google search and it seems a lot of people have problems with this one particular device/driver.
Also I've looked under Device Manager but I'm not sure where it would be listed, though I'm confident its actually not listed at all.
So what should I try next? I'd rather get it working than have to buy an adapter.
on 7077==>7100 Upgrade system refused on a Laptop -- said MMC O2 XD /SD driver incompatable and showed a red 'X'. Built in MMC card reader.
I've got the driver file in an 'EXE' file -- can't be bothered to extract driver for 7100 SCAN and load driver.
Just "Uninstall" from your 7077 installation (don't click delete software box').
Now run setup.exe again. (Use Device Manager to "uninstall the driver"
No probs.
I have been trying to get my sound card (Creative X-FI SB0460) to work under windows 7 x64, i have followed both a standard method of installation and the "Have disk" installation both failed, the "have disk" method reports it found driver but encountered an error then, fails with a "code 10" error, "the device cannot start".It has identified my device as "creative x-fi audio processor(WDM)" rather than just "multimedia audio device", but not installed and drivers.
View 5 Replies View RelatedI've been searching the Internet for a few days now and I still cannot find the way to get my sound card to work. I have tried many different drivers and now that I'm set on keeping 7 I just need to figure this out.
I'm running Windows 7 Ultimate 64 on my HP DV8000. Here is my id info for my audio card so if somebody could help me find the right driver that would be great.
PCIVEN_1002&DEV_4370&SUBSYS_309B103C&REV_02
PCIVEN_1002&DEV_4370&SUBSYS_309B103C
PCIVEN_1002&DEV_4370&CC_040100
PCIVEN_1002&DEV_4370&CC_0401
I've tried following instructions from an older thread but I can't seem to get IE8 to download ActiveX controls so I can find the driver myself. All the old links to drivers in the older thread are gone now.
how to i install latest audio sound driver card
View 2 Replies View RelatedI've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System:
ASUS P8Z68-V Pro/GEN 3
Intel 2600K
XFX R7950 Black Edition
OCZ 850W
Crucial 128 GB SSD
Seagate Barracuda 1 TB HD
Corsair H100
Windows 7 64 bit (full)
Working on a client's computer that was blue screening with Vista 32 bit HP desktop gl309aa. She cannot find the original Vista install CD. I determined that the culprit was probably the wifi driver, and hoped to install updated drivers for that, plus video card and sound card drivers. After much fiddling with the system, I finally got it started through Startup Repair long enough to install the video driver. I had to go through 2 sets of memory diagnostics to start it at all, since even safe mode was not working. When I went to do the sound card driver, it required an uninstall first, so I did that, and foolishly went along with the restart to finish the process. Lacking a sound card driver, it blue screened all over again. Tried everything, including many times with HP Recovery, but every time it blue screens before any process can complete. On top of this, while working on it, she had a power "flash" for a second, and now the system is missing BOOTMGR so it won't even try to boot into safe mode or anything else. I have the drivers on flash but cannot install them. I've decided to forget Vista (awful system anyway) and give her Windows 7 instead. Much more stable, and her data is backed up in case she loses it.
am I going to have any problems installing the Windows 7 if the computer still thinks it has no driver for the sound card? And is there a way to install the file before or during the Windows 7 installation so it will go smoothly? Again, BSOD every time I start HP recovery so there is no way to use that, and we will have a new Windows 7 CD to begin this process.
my brother's hdd in his laptop was going bad, it kept failing to boot. so i replaced it with another one. when i turned the laptop back on it started installing all the drivers for his hardware (windows was already installed on the 2nd hdd) and prompted me to reboot. after i did windows failed to start several times. i re-installed windows from scratch, and now his graphics card isn't showing up in device manager and windows cant find a driver for the network or ethernet card.
his specs:
gateway
windows 7 professional x64
ati mobility radeon hd 4250
broadcom bcm943225hm (network card)
amd phenom II x4 n9790
4gb ddr3
My PC just had a hard time booting because of startup repair,but it booted eventually,i'm scared to turn it off now though.I had about 3 BSOD since i bought the PC,and the pc is relatively new,some of the BSOD were during browsing i think.The PC hasn't got any other problems and is fast.I've concluded that the problem might be in the hard drive,what i seriously hope is not,because i have 2 hard drives in my PC,and one has a terabyte of size,so i can't back that up.
View 1 Replies View RelatedAt the beginning of the problem when I booted up my computer, I would check to see if the built-in wi-fi was working. If it wasn't, then it would freeze up at some point (usually soon after) and I was forced to restart. Whenever I booted my computer up and saw this problem, I restarted immediately. If the wi-fi was working, then the computer functioned normally. This was only an occasional problem, so I was able to deal with it by restarting when I found the problem.Then, a couple of weeks ago, my computer automatically forced a hard drive scan upon startup and found 4 corrupted segements on my disk. Next time it booted up, it scanned again and the errors had dissapeared.
Unfortunately, my problem worsened yesterday. When I booted it up, everything has significantly slowed down. It hangs on the Windows screen before I choose my profile, after I choose my profile, when it's loading my profile, and when I perform any task. I tried to start it in Safe Mode and found the same problem. I've found that if I just wait around (usually about 30 minutes), the computer catches up to itself and can perform normally for a while until I start to perform a demanding test. Then it hangs again. Can anyone identify a probable problem? It seems like it is a hardware problem mainly because it isn't an isolated event.
my windows 7 ultimate tablet. i booted up, and i have black desktop and "windows 7 build 7600 this copy of windows is not genuine" when i try to re-activate whith my key, i get an activation error. here is the MGADiag report:
Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
[Code].....
I think my hard drive is dying, The reason being is I can not boot my PC..
View 2 Replies View Relatedam completely stuck and not sure what to do. I am a MS employee, got a free (legal) copy of Win7 ultimate under the home usage program and our internal help desk says they donupport. I have loaded many OS onto laptops at work, so know the basic routine. Computer is HP Pavillion Desktop, came with Vista Home edition about two years ago. I checked for compatibility and chose to do a custom install. On first install I forgot to eliminate the second partition that had the original image. Computer booted up ok (incredibly slow, about 15 minutes) but could reboot without bluescreen. Wireless worked, I was able to do some windows updates but knew something was very wrong, so didnattempt to reinstall programs. Printer driver loaded on its own. Re-did the custom install, this time deleting the extra partition.
Now, I can barely boot up, the machine blue screens on the way, wireless does work and it doesn recognize my home network or any other network (usually there are 3 or 4 in my neighborhood that show up). Shutting down will blue screen as well, I tried yesterday. Im leaving it up and running hoping for a miracle cure. On first attempt, I was able to capture this information. Problem signature:Problem Event Name: BlueScreenOS Version:6.1.7600.2.0.0.256.1Locale ID: 1033Additional information about the problem:BCCode: 9fBCP3: 8293EAE0BCP4: 84AB20C8OS Version: 6_1_7600Service Pack:0_0Product: 256_1Files that help describe the problem:C:WindowsMinidum21410-30919-01.dmpC:UsersCherylAppDataLocalTempWER-94536-0.sysdata.xmlRd our privacy statement onlinetp://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline:C:Windowsystem32en-USerofflps.txt I tried to look at my current mini dump folder but its empty AND I dont have permissions to view
I used to have ubuntu dual booted with win 7.then i decided i didn't want ubuntu dual booted anymore and wanted my boot up to automatically boot win7.I deleted the ubuntu partition, but then I lost my boot up menu during startup.So I ran the Win 7 Ultimate disk in hopes to repair that.Instead I ended up with a fresh install that seems to be a seperate partition.the good news is it fixed my boot up , but now I have the option of 2 win 7s when I boot.I want to have just 1.and i think the one I want to keep is the fresh install, so my question is.How can I make my new install of win 7 be the only operating system on my computer. The older win7 i have is the one i have been using , but think i want to put all my data i need on a external hard drive, then delete that partition, then make the new fresh installled win 7 as my only operating system on my laptop.
View 9 Replies View Related
