my AIO printer is listed in Windows 7 Device manager as printer and fax separately.Printer acts as a fax machine I am not able to use windows fax and scan modem facility in my windows How can I change the present set up
View 1 Repliesi have a deskjet 4280 all in one printer and it will not print a test sheet or for that matter it just will not print anything!! i have done about everything i found on websites to correct this matter and have installed the hp diagnosis program for this and tried everything it has told me and still it doesn't work.
View 2 Replies View RelatedWhen I go to the device and printer window there is nothing listed. There are printers and devices on the computer because everything works with the exception of the Bluetooth. The printer prints, but I have no way of knowing what is in the queue. This may have never worked since the beginning. I don't know if this is related, but, Internet Explorer does not work. I have downloaded it at least 4 times with the same results. It will not open.
View 3 Replies View RelatedI had vista once I switch to windows 7 my hp deskjet f4100 series printer the operationg system won't run and the system no longer have printer physically showing in hardware
View 2 Replies View RelatedIssue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
View 1 Replies View Relatedi cant install nvidia drivers " this graphics driver could not find compatible graphic hardware", and i can't see my nvidia card on the device manager, and can't get the hardware ID, it looks like my laptop doesn't have this graphic card installed.
my latop is: ASUS - K52JC
2 graphics card, intel shared, and separated nvidia ( 310m cuda - 1GB )
i tried to follow this procedure, Fix Latest nVidia Mobility Driver to Fit Your Notebook
but couldn't find device ID, because it is not listed on device manager
My laptop config: Sony vaio (E- series) VPCEB24EN with intel i3 M350 @2.26 GHz processor, 512 MB ATI graphic card, 3Gb RAM. PROBLEM:Recently my laptop harddisk got repaired, i had thosiba MK3265GSX HDD with (320GB storage area, 8 MB buffer size & 5400 rpm). I replaced it with seagate ST9750420AS(750 GB, 16MB buffer size & 7200 rpm). Also previously i had only windows 7 Home basic 64-bit so, i purchased home professional with 64-bitfter installing my new OS i downloaded my drivers s/w, everything got installed except my intel HD graphic driver & it showed the message "minimum system requirement is not met" Also, in my device manager intel graphic not appeared in 'display device'. But, my ATI graphic driver is working properlyAlso, i tried with my older recovery CD which had home basic but when windows tried to install setup my harddisk is not detected since i changed it recently.i tried every possible solution but couldn't able to find exact reason.
View 2 Replies View RelatedI've deleted an old question since no one replied out of 150 + viewers. some input so I can figure this out This is weird and I'm wondering if you have these printer issues?
I have a HP Officejet 6500A Plus Printer. (all in one) In Windows 7 under Disk Manager my printer is listed as a Hard Drive thats weird. The printer is connected with a USB cable so I think the system and the drivers think it a flash drive.
Is this normal? Or can it be fixed? If so how? HP and MS have not repiied to my Quieies. My printer works but I'd like to know why.
I downloaded Printers' drivers, one for HP and the other for Epson by accessing their web-sites.Both are USB-connection and working fine, however icons of both printers on, ... Start > Device and Printers,.... there are no printers' icons, even though other devices, such as thumb-drive, monitor, keyboard and others.Just wonder why icons of both printers are missing on 'Device and Printer?'
View 1 Replies View RelatedI have a laptop with windows 7 and three different accounts on it. two of the accounts are just standard user and one is a administrator. On the administrator account you can print to my printer, but on the standard accounts you can't. I have made sure that the printer is set to be the default and it does list the printer but says it is offline.
View 1 Replies View RelatedI have purchased a D-Link 1040 wireless print server and have connected it to my printer using a USB connection. I have installed the software. I turned the power on and pressed the little button on the side of the print server to enter search mode. In Windows 7 I tried adding a device but my computer can't find it.I suspect I may have to make some network connection or adjustments using my wifi modem. How to proceed?
View 7 Replies View RelatedNew computer windows 7. Lexmark Z52 printer. Devices and Printers calls it an unspecified device and could not locate drivers. I went through the steps and did Windows Update and it found the drivers. I have tried unplugging, power off, computer off and reboot. Reboot with USB plugged in, reboot with USB unplugged. A whole host of attempts with no success. My old computer was 7 also, and I was able to find a generic fix. It was a driver (bullzip) I thought, but cant get that to work either. All I need is basic printing for check writing and regular Word stuff. No photos or graphics printing.
View 6 Replies View RelatedThe device and printer window is empty. Almost everything is working except blue tooth and IE9. However, there is no device or printer noted.
View 1 Replies View Relateddevice & printer icons are missing in window 7. How do I fix them
View 5 Replies View RelatedI cannot seem to add a printer. The menu comes up with two displays; Add a device and Add a printer. The Add a device works but the Add a printer just blinks and returns to the screen.
View 5 Replies View RelatedLooked in the task manager today and noticed 4 separate entries for explorer.exe / windows explorer. Is this normal? Or does it indicate a problem? Windows 7 32 bit system.
View 3 Replies View RelatedI have been trying to determine the source or cause of a printer that appears as a device on my network, however not only is nothing other than my Roku box attached to my router, I have never owned the device in question. After refreshing the page the device disappears. The screen shots below should concerned about a breach in my network but again, the router shows nothing attached that should not be already.
View 4 Replies View Relatedhaving moved once and having add and removed computers from my home network, along with other changes, I now have a cluttered Printer Selection Window, by which I mean the window that pops up when I want to print a document. I have five versions of a Brother printer and four versions of an HP printer, and only one of each is actually good. How do I clean up that window by getting rid of those obsolete references that no longer work? It's ridiculous that they don't simply disappear when I select one of them as the default.
View 5 Replies View RelatedI bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies View Relateddownload in my computer hp laserjet driver P1007
View 1 Replies View RelatedWhy did my computer stop recognizing my printer. I cannot find my printer desk.
View 2 Replies View RelatedI use Windows 7 Professional 64 bit. My problem is: Whenever I try to print something (word, pdf, or any other file); printer spooler stops working and when I check the Devices and Printers all the printer drivers seem to be disappeared. I checked the Print Spooler" in the Services tool; and set the "Recovery after subsequent failures" option to Restart the Serviceā. Therefore all the printer drives coma back after 1 minute. However the spooler stops immediately again when the uncompleted printing job starts; hence I can not print anything more than a page. Earlier in this forum, someone posted that Microsoft issued a hotfix for this problem ( hotfix 2388142) which can be downloaded from article: [URL]. I downloaded this hotfix and tried to install, however it gives an error message of: The update is not applicable to your computer and quits installation. I did uninstall and reinstall all the printer drives, but this did not help either.
View 1 Replies View RelatedI have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies View Relatedi want to download software and driver for hp laser jet p1007 . I am unable to use my printer.
View 1 Replies View RelatedWindows 7 recognizes the printer but has a yellow triangle exclamation point. it will not print, but I cannot find any printer driver for Windows 7. any ideas?
Answer:-
Are yere any more details on what is the matter with the printer in device manager?
You should be able to download the Windows Vista drivers for that printer from here, which should be compatible with Windows 7:
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:549:0:0
I have an MX850 and an MX870 printer both connected to my LAN.I also use an application called CD Label Print. When I started that program I noticed that there were 3 MX850 printers listed, the original and a (Copy 1) and (Copy 2).So I went to devices and printers and saw there was a MX850 and a MX850 (Copy 2). No (Copy 1). So I removed the (Copy 2) printer and fax.I went back to CD Label print and saw that it still said MX850 and MX850 (Copy 1). Went back to devices and printers and sure enough, MX850 was gone and MX850 (Copy 1) was present. So I pressed F5. It changed to MX850. Press F5 again, it changed back to MX850 (Copy 1).It changes non-stop. It alternates betweem the two settings every time I press F5.I've tried uninstall re-install. I've also contacted Canon support who are dumbfounded. I also had to manually remove the registry entries and start menu entries because the canon uninstaller doesn't so it.I cannot use CD Label print. Each time I try to print a label it insists on asking where to save the file, rather than printing it.
View 1 Replies View Relatedfind out the correct driver hp laserjet p1007
View 1 Replies View RelatedMY HP wireless printer is not showing up in Devices and Printers in Windows 7.
View 8 Replies View RelatedHave recently purchased a small usb inspection snake camera with led light and when testing it plugged it into two desktops computers (one xp pro not sure of the other as it was a network work computer) It automatically loaded the drivers and brought up a screen automatically with the realtime image.(no driver disc came with it). However plugging into my windows 7 64bit sony laptop it signals a connection beep, loaded drivers automatically but wouldn't open or show up on my computer disc manager as an external usb source to click on. It does however show up on device manager as a usb camera and when I unplug and replug in it disappears and reappears so I know I have the right camera (not the lap top webcam inbuilt one that shows USB 2 Camera). Have tried updating drivers automatically and uninstalling it etc. Need it to work on the lap top so it can act as the movable screen for it?
View 29 Replies View RelatedIf i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
View 2 Replies View RelatedWe have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
View 5 Replies View Related