Dell 1600N Printer No Longer Showing Up In Devices Window
Aug 15, 2011
I have a Del 1600N Multi function printer that has been in use (successfully) for about two years on my home network. The printer has a built in NIC and is connected via a dedicated 10BaseT line to my network. This printer was working just FINE until I decided to use it as a fax. Some how during that process I must have cleared the network configuration and it stopped being visible on my network. After some investigation into this I was able to get it back on the network my manually assigning it an IP address. Using the supplied installation DVD, I was able to install the printer onto my two desktop computers (running XP Pro 32 bit) and it works just as well as before.
The problem occurs with my wife's Dell laptop. Before the great "fax fiasco" (as I like to call my stupid attempt to use this printer as a fax machine), the laptop was able to find and print to this printer with very little problems. Now, not so much! When I went to re-install this printer the first time I made sure that the Dell Printer software was uninstalled (via Control Panel--Uninstall Programs). The first attempt seemed to be going fine. The software detected the printer on the network and it looked like a successful install. However, the test page did not print out! I checked in the "Printer Properties" to make sure that the printer was on line and sure enough, it was.
But there was a troubleshooting alert that told me the document didn't print. After several hours of messing with it, I decided to uninstall and try again. The second time went much like the first. Then I reasoned that the drivers may be the problem. So I looked on Dell's web site and found the Windows 7 drivers for this printer. I uninstalled the old drivers, downloaded the new ones and then installed. As before it found the printer. But during the install it flashed a message saying that it could not find a file (which was weird).
When I hit "continue" it proceeds and looks like it finishes. The network printer monitoring icon appears in the system tray and I can see the 'scanner" portion of this Multifunction Printer. But still, it won't print to it. And in addition, the printer now refuses to show up in the "Printer and Devices Window"! What am I doing wrong? I've heard that Windows 7 has problems with old printers. But this printer was working perfectly before this! What steps do I need to do to totally remove the old printer drivers and start from scratch? Is there a way to get this printer to be able to work with my wife's Dell Laptop?
View 1 Replies
ADVERTISEMENT
Jun 21, 2012
I have an old Dell 1600n printer I love connected on my home network.It's connected to one XP machine (and shared). All our computers here use it XP laptops, Win 98 desktop and my Win 7 laptop.However, I can't get it to install to my new Win 7 desktop.I've downloaded Dells drivers and extracted them to a folder in my user area; however, neither running the setup utility that's part of the driver package (which can't find the printer on the network) or using the Add Printer function in Win 7 (which can't find an INF file) are working. The Win 7 error is "No driver found. Windows can't find a driver for Dell Laser MFP 1600n on the network. To locate one manually, click OK.Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website." I've tried point it to any number of the extracted files from the driver package and no luck.
View 9 Replies
View Related
Aug 12, 2012
I had a Dell MFP1600n laser printer given to me a while back (Praise the Lord) & it came at the right time as I was destitute then & couldn't afford cartridges for a Canon I960.Here's the rub.There was no problem connecting & using the printer with a wired connection to a Linksys WRT54GS & a wired XP Desktop & a wireless XP Desktop (both older 86X systems).Though the 64 bit, wireless, Windows 7 laptop connected through the same router to the internet. As usual, it would not & still does not "see the XP machines". It also would not, through multiple configurations, connect to this printer.At first I tried to update the driver, but Dell only had XP 32 bit available. After hours & days of wasted time with "Add printer", I resorted to using a flash drive for the few times I needed to print something from this infernal Windows 7 machine.
I finally wondered if my head was stuck in the "soon to be obsolete, XP mode".'know, this isn't the first time Microsoft has Pi**ed me off & I understand that we are all "beta testing" a product that we have paid several hundred dollars for. I also understand the reason for security, but I don't want to spend 50% or better of my time trying to use an OS that cannot tell ME from a scumbag intruder. There are AV programs for that...As it came installed on my laptop (& of course I received no restore or install disks whatsoever with it), I'm stuck with trying to repair, rather than reformat. Unless I wish to pi** away a bunch more money to Microsoft.
View 3 Replies
View Related
Apr 6, 2011
dell xps gen 4 running windows 7 (32 Bit)after downloading the latest windows updates, front and back USB ports no longer recognize the USB devices that were plugged in before. The usb device drivers no longer automatically load. usb ports recognize unknown device but device does not function (USB wireless Keyboard/ mouse or external hard drive) I deleted last few updates, re-booted computer and still get same result.
View 5 Replies
View Related
Dec 16, 2011
Whenever I try to open "Devices and Printers," the green bar at the top of the next window begins moving from left to right slowly and never completes the trip to the end of the bar and the Devices and Printer window never opens. I have to open "Devices and Printers several times over several days with the same result.
View 9 Replies
View Related
May 4, 2011
I recently updated my Windows 7 Ultimate with Service Pack 1 through Windows Update and after the reboot my Bluetooth devices don�t work. I have two Dell mice and a Dell keyboard and they no longer function.I deleted the devices and added them back and while they were discovered and did attach they don�t function. Additionally, detailed information on the devices is no longer present.One of my mice was a Dell Travel Mouse and before it showed up as an icon that looked just like my mouse not it shows up as a generic mouse.
In trying to troubleshoot this i disabled the internal Bluetooth and plugged in a Belkin Bluetooth Dongle and it behaves the same way. However as this was an external device it has a flashing light showing when it is receiving a transmission and when I moved the mouse the light would flash so the signal is getting to the computer however nothing is happening on screen. This dongle works perfect on my other Dell D620 Laptop with Windows 7 and no service pack.
Dell D830
Internal Dell 360 Bluetooth
Windows 7 Ultimate
Service Pack 1
4 GB RAM
All Windows Updates applied
View 2 Replies
View Related
Jul 14, 2012
Why did my computer stop recognizing my printer. I cannot find my printer desk.
View 2 Replies
View Related
Dec 28, 2012
I have a Microsoft 5000 bluetooth mouse which doesn't work ever since I updated my bluetooth drivers. My bluetooth keyboard and numpad work fine. I want to re-pair it with the computer but Windows will not display any device which is already installed when looking for devices and my mouse currently shows up in the devices and printers window. I want to remove the mouse from this window but it is the only device which doesn't have a "remove device" option when I click it. The keyboard and the numpad both have this option...
How can I remove this device so I can pair it again with the computer?
View 1 Replies
View Related
Oct 10, 2012
I downloaded the latest Windows update just a bit ago. When the comp rebooted I had an Adobe Flash update (which I installed). Rebooted, then opened Word to print out a document and it couldn't locate any printers. Tried to "Add printer" and got the error "The Active Directory Domain Services is currently unavailable."Perplexed, I decided to check my printers in Devices and Printers--and it is no longer there! Not that I click on Devices and Printers and it is black--the Devices and Printers option is no longer there when I click on the Start menu.
View 4 Replies
View Related
Sep 13, 2011
I have an MX850 and an MX870 printer both connected to my LAN.I also use an application called CD Label Print. When I started that program I noticed that there were 3 MX850 printers listed, the original and a (Copy 1) and (Copy 2).So I went to devices and printers and saw there was a MX850 and a MX850 (Copy 2). No (Copy 1). So I removed the (Copy 2) printer and fax.I went back to CD Label print and saw that it still said MX850 and MX850 (Copy 1). Went back to devices and printers and sure enough, MX850 was gone and MX850 (Copy 1) was present. So I pressed F5. It changed to MX850. Press F5 again, it changed back to MX850 (Copy 1).It changes non-stop. It alternates betweem the two settings every time I press F5.I've tried uninstall re-install. I've also contacted Canon support who are dumbfounded. I also had to manually remove the registry entries and start menu entries because the canon uninstaller doesn't so it.I cannot use CD Label print. Each time I try to print a label it insists on asking where to save the file, rather than printing it.
View 1 Replies
View Related
Oct 17, 2012
MY HP wireless printer is not showing up in Devices and Printers in Windows 7.
View 8 Replies
View Related
Apr 26, 2011
having moved once and having add and removed computers from my home network, along with other changes, I now have a cluttered Printer Selection Window, by which I mean the window that pops up when I want to print a document. I have five versions of a Brother printer and four versions of an HP printer, and only one of each is actually good. How do I clean up that window by getting rid of those obsolete references that no longer work? It's ridiculous that they don't simply disappear when I select one of them as the default.
View 5 Replies
View Related
Sep 16, 2009
I would like to NOT have my two SATA hard drives and my DVD/CD player not showing as removable hardware in the list on my task bar. Any ideas anybody?
View 1 Replies
View Related
Dec 9, 2011
I got my laptop last week and and yesterday the sound stopped working. The laptop is a ASUS G53SX: i7-2670QM 2,2 ghz. 8 GB RAM. GTX 560M.
I have tried to update/re-install the drivers without any luck. I have also tried system recovery and still no sound. The latest software that I have installed is Adobe Production premium 5.5 and The Elder Scrolls V: Skyrim.
I have checked the playback settings and the only device showing is Sony-tv 1. I also checked for deactivated and disconnected devices but still only Sony-tv.
View 1 Replies
View Related
Nov 3, 2010
Just got windows 7 32-bit. I'm stuck on is that no devices are being shown in the Safely Remove Hardware Dialogue box. I know I have a device in..it's my MP3 player which I have just copied songs over too and I can play them. There is no icon in the systems tray either. I then looked around the web and found a page showing how to create a shortcut on the desktop to activate the dialogue box.
Point target to ":C:WindowsSystem32
undll32.exe shell32.dll, Control_RunDLL hotplug.dll"
Created it, got the box up but no devices showing in it when the mp3 player was plugged in. Pulled out the mp3 player without removing safely first as didn't know how....not ideal.
View 6 Replies
View Related
Apr 24, 2012
I cant get my webcam to open it shows up in my hardware and on my computer drive but wont open to take pictures or anything. I know I have one and I've used it on other things. But I cant seem to find it and actually open it on my laptop. I have windows 7 what do I need to do?
View 1 Replies
View Related
Jul 8, 2011
I have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies
View Related
Jun 17, 2011
I have a Sony Vaio Laptop with Windows 7 Ultimate 64bit Model VPCEC1M1E. The problems that I am having are: The ATI Display driver stops responding and the screen goes blank, Also the optical drive is no longer showing within windows, and it will no longer open. I have tried lots of different ATI display drivers for the laptop however none of these have worked I have also tried clean installs but this did not make any difference. I have had a look through Event viewer and one error that seems to be a cause for concern is:Event ID 13: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS.In some situations, this error may cause the computer to function incorrectly.
View 5 Replies
View Related
Mar 14, 2011
(Win 7 Pro 64-bit). On the "Choose Media Streaming Options for Computers and Devices" screen in the Network and Sharing center, where it shows devices on all networks, how do I get back devices that I remove from that list? I accidentally removed them and want to get them back.
View 1 Replies
View Related
Feb 19, 2013
Dell webcam drivers for dell vostro 1550 for win2007 download?
View 1 Replies
View Related
Oct 14, 2012
Since I built this computer in 2010 I've had a scheduled task which runs a VBS script to remind me to take my tablets each morning. Until the last few days, only one element was visible from this task, the message box spawned by the VBS script.However, in the last few days, I also get a taskeng.exe window appearing at exactly the same time as the message box. The window is labelled taskeng.exe, has a VBS scripting host icon and the content of the window is pure black.If I terminate taskeng.exe in Task Manager or click OK in the VBS message box, both the VBS script and that black window disappear.I have no idea what might have caused taskeng.exe to only appear in this situation, because MSI AfterBurner also uses it to start the app during user login and it doesn't appear for that.
View 1 Replies
View Related
Oct 6, 2012
I have just installed just cause 2 game on my computer, I have copied the cracks successfully but whenever I start the game it does not respond and a popup window comes and it shows error. How to run it...
View 2 Replies
View Related
Apr 30, 2012
I got this PC 3 weeks ago. For two days now Several of my devices have a Code 10 on start up. For instance my mouse in the Device Manager window has a code 10 and will not work until I use the trouble shooter and it re-installs the driver. I have tried updating the USB drivers as many recommend but there were no updates. I tried Microsoft's fix it, and it was not fixed.
View 9 Replies
View Related
Oct 26, 2009
I use Windows 7 64 bit.
I cannot open the folder devices and printer folder. The folder is empty.
I can print correctly using MS office or others programs (see attached).
Any suggestion please?
View 8 Replies
View Related
Nov 10, 2009
when I click on devices and printers, the menu freezes. It keeps showing the green loading bar for an indefinite amount of time. Any reason for this? I do not have any printers hooked up directly to the computer, just one I connect to through an ethernet wire.
View 0 Replies
View Related
Jun 27, 2011
I have a Brother HL-2270W Wireless All-In-On laser printer which also does duplex printing. I'd like to be able to have two entries in my Devices and Printers list that point to this same printer. One would be setup to default to Duplex printing. This would make it a lot simpler than having to select this each time I print something. Setting it for Duplex as the default causes every page, even if it only is a single page, to go through the duplex process which slows down non-duplex printing a lot.
View 4 Replies
View Related
Apr 4, 2012
If you remove a printer using Devices an Printers will you delete the driver or do have to do this through the Print Manager
View 2 Replies
View Related
Apr 29, 2011
I have a printer icon in "Printers and Devices" that I can't get rid of and I believe that it is causing conflicts with my being able to use my printer correctly, i.e., I have downloaded drivers for my printer but when troubleshoot the correct printer icon, the results show that there is no printer driver installed for my printer. The offending icon is the "HP Universal Printing PCL 5" icon.(Please see the screenshot in the attachment.) I have tried the "Remove Device" option many times, but the icon reappears. Also, frequently, when I click on the IE icon, the page that comes up is blank and I have to go into Tools/Internet Options to get my home page back. I don't know if these problems are related, but I wanted to mention them both in case they are.
View 3 Replies
View Related
Dec 29, 2011
I tried to install driver for samsung laser printer 331 and on desktop w/win 7 home premium. Message says cannot locate printer & in devices & printer its shown in unspecified. Checked printer by installing on laptop with xp worked fine.
View 9 Replies
View Related
Oct 15, 2012
I have a HP desktop computer running Windows 7 64bit. I just did a factory restore. Everything was re-installed and works fine except one of the printers. There are two printers. A HP Photosmart wireless printer, which works fine. The second one is a Brother HL-2140 USB connected printer. It works fine as well BUT it does not appear in Devices and printers.
I have used Brother's uninstall tool to remove it. I then downloaded, from Brother's website, the correct driver and I re-installed (A/V was disabled during this process). The printer appeared in Devices and Printers but shortly after it disappeared again. The printer is still working but it not viewable from Devices and Printers.
View 1 Replies
View Related
Jan 19, 2012
Printer plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.
Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.
When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?
View 5 Replies
View Related