when I click on devices and printers, the menu freezes. It keeps showing the green loading bar for an indefinite amount of time. Any reason for this? I do not have any printers hooked up directly to the computer, just one I connect to through an ethernet wire.
View 0 RepliesI have an MX850 and an MX870 printer both connected to my LAN.I also use an application called CD Label Print. When I started that program I noticed that there were 3 MX850 printers listed, the original and a (Copy 1) and (Copy 2).So I went to devices and printers and saw there was a MX850 and a MX850 (Copy 2). No (Copy 1). So I removed the (Copy 2) printer and fax.I went back to CD Label print and saw that it still said MX850 and MX850 (Copy 1). Went back to devices and printers and sure enough, MX850 was gone and MX850 (Copy 1) was present. So I pressed F5. It changed to MX850. Press F5 again, it changed back to MX850 (Copy 1).It changes non-stop. It alternates betweem the two settings every time I press F5.I've tried uninstall re-install. I've also contacted Canon support who are dumbfounded. I also had to manually remove the registry entries and start menu entries because the canon uninstaller doesn't so it.I cannot use CD Label print. Each time I try to print a label it insists on asking where to save the file, rather than printing it.
View 1 Replies View RelatedMY HP wireless printer is not showing up in Devices and Printers in Windows 7.
View 8 Replies View RelatedI use Windows 7 64 bit.
I cannot open the folder devices and printer folder. The folder is empty.
I can print correctly using MS office or others programs (see attached).
Any suggestion please?
I have a Brother HL-2270W Wireless All-In-On laser printer which also does duplex printing. I'd like to be able to have two entries in my Devices and Printers list that point to this same printer. One would be setup to default to Duplex printing. This would make it a lot simpler than having to select this each time I print something. Setting it for Duplex as the default causes every page, even if it only is a single page, to go through the duplex process which slows down non-duplex printing a lot.
View 4 Replies View RelatedIf you remove a printer using Devices an Printers will you delete the driver or do have to do this through the Print Manager
View 2 Replies View RelatedI have a printer icon in "Printers and Devices" that I can't get rid of and I believe that it is causing conflicts with my being able to use my printer correctly, i.e., I have downloaded drivers for my printer but when troubleshoot the correct printer icon, the results show that there is no printer driver installed for my printer. The offending icon is the "HP Universal Printing PCL 5" icon.(Please see the screenshot in the attachment.) I have tried the "Remove Device" option many times, but the icon reappears. Also, frequently, when I click on the IE icon, the page that comes up is blank and I have to go into Tools/Internet Options to get my home page back. I don't know if these problems are related, but I wanted to mention them both in case they are.
View 3 Replies View RelatedI tried to install driver for samsung laser printer 331 and on desktop w/win 7 home premium. Message says cannot locate printer & in devices & printer its shown in unspecified. Checked printer by installing on laptop with xp worked fine.
View 9 Replies View RelatedI have a HP desktop computer running Windows 7 64bit. I just did a factory restore. Everything was re-installed and works fine except one of the printers. There are two printers. A HP Photosmart wireless printer, which works fine. The second one is a Brother HL-2140 USB connected printer. It works fine as well BUT it does not appear in Devices and printers.
I have used Brother's uninstall tool to remove it. I then downloaded, from Brother's website, the correct driver and I re-installed (A/V was disabled during this process). The printer appeared in Devices and Printers but shortly after it disappeared again. The printer is still working but it not viewable from Devices and Printers.
I have a Del 1600N Multi function printer that has been in use (successfully) for about two years on my home network. The printer has a built in NIC and is connected via a dedicated 10BaseT line to my network. This printer was working just FINE until I decided to use it as a fax. Some how during that process I must have cleared the network configuration and it stopped being visible on my network. After some investigation into this I was able to get it back on the network my manually assigning it an IP address. Using the supplied installation DVD, I was able to install the printer onto my two desktop computers (running XP Pro 32 bit) and it works just as well as before.
The problem occurs with my wife's Dell laptop. Before the great "fax fiasco" (as I like to call my stupid attempt to use this printer as a fax machine), the laptop was able to find and print to this printer with very little problems. Now, not so much! When I went to re-install this printer the first time I made sure that the Dell Printer software was uninstalled (via Control Panel--Uninstall Programs). The first attempt seemed to be going fine. The software detected the printer on the network and it looked like a successful install. However, the test page did not print out! I checked in the "Printer Properties" to make sure that the printer was on line and sure enough, it was.
But there was a troubleshooting alert that told me the document didn't print. After several hours of messing with it, I decided to uninstall and try again. The second time went much like the first. Then I reasoned that the drivers may be the problem. So I looked on Dell's web site and found the Windows 7 drivers for this printer. I uninstalled the old drivers, downloaded the new ones and then installed. As before it found the printer. But during the install it flashed a message saying that it could not find a file (which was weird).
When I hit "continue" it proceeds and looks like it finishes. The network printer monitoring icon appears in the system tray and I can see the 'scanner" portion of this Multifunction Printer. But still, it won't print to it. And in addition, the printer now refuses to show up in the "Printer and Devices Window"! What am I doing wrong? I've heard that Windows 7 has problems with old printers. But this printer was working perfectly before this! What steps do I need to do to totally remove the old printer drivers and start from scratch? Is there a way to get this printer to be able to work with my wife's Dell Laptop?
I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
View 2 Replies View RelatedNew Windows 7 (64-bit) HP PC freezes at startup when HP Office-jet Pro L7680 All-in-One printer is USB-connected. If the USB cable is disconnected, the PC unfreezes and continues booting correctly, and the printer functions properly with the exception that the scanning function causes a freeze-up. There was never any of these freezing issues when the same printer was connected to my old XP machine. I have uninstalled and re-installed printer drivers to no avail.
View 5 Replies View Relatedi have random freezes sometimes they are glitchy and rarely bsod all on bootup or up to about half hour in (which also turns of the mouse). also Internet doesn't autoplay playlists and all sugestions next to the video are black. this started a few weeks to a month ago, first it seemed just a minor annoyance but it started to become more often the last few days. i've tried some checks but without success.
also i remember the week before those crashes that twice the screen driver crashed for a second or 2 and then a message popped up about how a monitor driver crash was adjusted, always when i played a certain game that is still in beta so i taught it was the game.
having moved once and having add and removed computers from my home network, along with other changes, I now have a cluttered Printer Selection Window, by which I mean the window that pops up when I want to print a document. I have five versions of a Brother printer and four versions of an HP printer, and only one of each is actually good. How do I clean up that window by getting rid of those obsolete references that no longer work? It's ridiculous that they don't simply disappear when I select one of them as the default.
View 5 Replies View RelatedI bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies View Relateddownload in my computer hp laserjet driver P1007
View 1 Replies View RelatedWhy did my computer stop recognizing my printer. I cannot find my printer desk.
View 2 Replies View RelatedI use Windows 7 Professional 64 bit. My problem is: Whenever I try to print something (word, pdf, or any other file); printer spooler stops working and when I check the Devices and Printers all the printer drivers seem to be disappeared. I checked the Print Spooler" in the Services tool; and set the "Recovery after subsequent failures" option to Restart the Serviceā. Therefore all the printer drives coma back after 1 minute. However the spooler stops immediately again when the uncompleted printing job starts; hence I can not print anything more than a page. Earlier in this forum, someone posted that Microsoft issued a hotfix for this problem ( hotfix 2388142) which can be downloaded from article: [URL]. I downloaded this hotfix and tried to install, however it gives an error message of: The update is not applicable to your computer and quits installation. I did uninstall and reinstall all the printer drives, but this did not help either.
View 1 Replies View RelatedI have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies View Relatedi want to download software and driver for hp laser jet p1007 . I am unable to use my printer.
View 1 Replies View Relatedmy AIO printer is listed in Windows 7 Device manager as printer and fax separately.Printer acts as a fax machine I am not able to use windows fax and scan modem facility in my windows How can I change the present set up
View 1 Replies View RelatedWindows 7 recognizes the printer but has a yellow triangle exclamation point. it will not print, but I cannot find any printer driver for Windows 7. any ideas?
Answer:-
Are yere any more details on what is the matter with the printer in device manager?
You should be able to download the Windows Vista drivers for that printer from here, which should be compatible with Windows 7:
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:549:0:0
OK so this is with my sisters laptop, everything was apparently fine one day & not working the next.I've read it may be a driver issue & have re-installed the correct (I think) driver version, but this hasn't fixed the problem.
View 1 Replies View RelatedSince installing Windows 7 Ultimate, Devices has been showing my laptop icon with the yellow triangle/exclamation mark symbol next to it.
When I right click and go to Properties > Hardware the first entry is Unknown Device and it shows the same warning symbol.
The right click drop-down box's Troubleshoot, just above Properties, also has this warning symbol next to it but when I run Troubleshoot it is unable to fix the problem.
Device Manager shows Other Devices > Unknown Device, again with the yellow triangle/exclamation mark.
Right clicking Unknown Device and going to Properties > Details > Hardware IDs shows ACPI/HPQ0006 and on the second line *HPQ0006
I have uninstalled it via Device Manager but it just re-installs when I re-boot and I am back to square one!
My laptop is a Compaq Presario C350EA with Windows 7, 32-bit, installed and as far as I can tell, it is working OK but I am a little concerned about these warning symbols.
I have Windows 7 Ultimate and am trying to setup a backup of some files using the inbuilt 'Set UP Backup' utility but in the list of backup destination devices I can only see the DVD drive even thought I have a USB stick plugged in. I have tried the USB stick in all 3 available ports but no luck.
View 1 Replies View Relatedwhen I connected more then 3 usb device in my pc, the 4th usb device not working,,my pc all usb port is worked and my usb device is also, but not working together four usb devices.. only 3 usb devices work at a time.
View 7 Replies View Relatedwindows updated some keyboard drivers or something before i turned off and removed my graphics card to try sort out the heat sink. Anyway, since then my pc has been unable to detect any of the audio ports attached to the motherboard. I've tried various suggestions on other threads but none have worked hence my first post.I understand for any help ill likely need to give more information and ill happily provide such details.
View 5 Replies View RelatedI want to download pictures from my samsung s11 but not successfully installed on my computer how will do it?
View 1 Replies View RelatedIn this tutorial, we demonstrate the new Devices and Printers section of the control panel. This new feature of Windows 7 aims to make it easier to work with and troubleshoot peripheral devices, such as printers, monitors, external storage devices and game controllers. Instead of trying to find your device in a big long list, Devices and Printers tries to assign an icon to it which represents the actual device more clearly.
View 0 Replies View Relatedi have speakers connected to the hdmi and have a fm transmitter connected to the headphones jack. how do i get the soud to come out of both? Picture:
View 2 Replies View Relatedi have an old windows xp pc that my son uses for chat and homework for printing. the problem i,ve now got is he and a friend of his has formatted the pc and installed windows 7.i do know that some of the devices do not have windows 7 drivers because i once checked when he asked me could he have win 7 on it. i didnt bother to upgrade the pc as there was no need.the problem he now has is that everything works but there is nothing on the monitor. it says no input. i have researched on google and the answer i get is because there is no win 7 driver for the nVidia GeForce FX5200.
View 6 Replies View Related