Wi-fi Device For 3.2 Window Experience Index?
Jun 12, 2012i want to wi-fi driver for 3.2 window experience index 64 bit
View 1 Repliesi want to wi-fi driver for 3.2 window experience index 64 bit
View 1 RepliesI just built a new computer everything is completely compatible with each other. I installed windows 7 pro 64 bit and i seem to be having problems accessing certain details in my control panel. I can't run windows rating index or device management the window just freezes up. the same is happening for trying to open the action center the windows just seem to keep freezing. when in safe mode everything runs perfectly fine but when i restart back to normal the same problem occurs anyone know what might be causing this? I don't have a virus the computer has been running for not even a day with limited internet use.
View 3 Replies View RelatedI ran the Windows Experience Index on the PC I just built and in the part that tells you the amount of RAM you have installed, it says nothing.
Installed Memory (RAM): (Blank)
However, it did give me a rating of 7.4 for the RAM section. (6 Gigs of OCZ DDR3 1600 )
Is this something to worry about?
I recently installed a new hyper 212 cooler. After doing so I downloaded the Intel Burn Tool and ran it a few time to make sure my temps were fine. Now I can't run the WEI program?
View 18 Replies View RelatedMy Windows experience index is 5.5, can I increase it?My Computer is an Intel DH67BL_ Motherboard Intel i7 2600 3.4GHz CPU 16 GB of memory, 500 GB Seagate SATA hard drive, running Windows 7 Pro 64bit.
View 1 Replies View RelatedI have an Asus G73SW Republic of Gamers laptop. Systems specs are an i7 2630QM 2.0ghz cpu, 16GB of ram, 1TB and 500GB, Nvidia GeForce 460m 1.5g of mem. My question is looking at other people that have the same machine are rating at around 7 on the processor part of the WEI, but I am rating a 4.7!!!!! I have also seen many machines at work that have far lower processing power that rate a higher score than I do.
View 5 Replies View RelatedI just did a clean install of Windows 7 Home Premium on my laptop a few days ago, and am trying to get the Windows Experience Index generated. However, I get a message saying that it couldn't be completed due to an error. Here is the info from the winsat.log file: Code:
View 7 Replies View RelatedI previously had vista installed and it performed smoothly.I did a Windows 7(x64) clean install and i kept getting the usual "cannot complete the assessment error".
I updated all BIOS-graphic card drivers and still no solution.
My Windows Experience index is not working. I click on "rate this computer", and nothing happens. My old scores are gone, but I haven't tried using it in probably 4 months. I have Windows 7 Ultimate 64 bit SP1 OS Version 6.1.7601.
View 3 Replies View Relatedmy windows experience index did not give rate to my pc
View 1 Replies View RelatedI have core2duo T6600 2.20ghz cpu, 4 gb(2.75gb usable) ram installed on my system, 500 gb hdd, and 512 mb dedicated nvidia graphics memory. Still my windows experience index is 3.4 only. Is there any way to increase it. Due to low WEI I face problems in playing some games.
View 20 Replies View RelatedI have a problem (though I think it is minor because my system recovers quite well from it after restarting). Basically, I overclocked my CPU to 4.19 gHz and everything is running smoothly (also got a Radeon 7770 HD graphics card) so I decided to redo my WEI score and close to the end of the CPU test the computer crashed and went to the blue screen of death before restarting again. Everything seems fine with my computer but I'm not sure what the problem might be. [code]
View 1 Replies View RelatedMy 2 SATA HDD's are connected to my 6GB SATA ports on the MB. Is this the best score I could get with my hardware or will I need to install a SSD?
View 9 Replies View RelatedSo I keep getting this error when trying to run WEI so that I can get the previews for the taskbar.
-- Error message --
The Windows Experience Index for your system could not be computed.
Could not measure storage performance. Error: Failed to properly assess the disk. The data is invalid.
-- End error message --
i own dell vostro 1400, c2d 1.6ghz, 4 gb ddr2 ram (2x2gb), windows 7 ultimate 32 bits.
i was very happy with the performance but suddenly it has become extremely slow to use. it becomes quite unresponsive even for simple tasks like watching Internet in browser. i check windows experience index and found out that processor and memory subscores are very low.
it shows 2.1 for processor and 2.8 memory.
I have sony Vaio VPCEC290X before Windows Experience Index was 5.1 but now it reduced to 3.5 i have update to latest bios a i have check power settings cleaned laptop dust also but the score is still 3.5 what might be the problem i have contact sony care also they checked and told nothing problem with your hardware
View 1 Replies View RelatedI'm curious to see what kind of numbers people have gotten for the primary hard disk data transfer rate. Under Vista I scored 5.9 on all tests as it was as high as the numbers would go.
After a clean install of Windows 7 Ultimate, I was quite surprised to find my primary hard disk score remained at a 5.9. My boot drive is made up of 2 10,000RPM cheetah SATA drives in a RAID stripe (RAID0). I'm wondering if this test is still maxed out at 5.9. If you got higher than 5.9, what kind of drive are you using? I'm sure SSD's score higher.
Several weeks back I started getting an error every time I ran the WEI in one of my computers. It would stop near the end of its run with the following error:The Windows Experience Index for Your System Could Not be Computed Could not measure storage performance.Error: Failed to properly asses the disk.The parameter is incorrect.(Parameter ??? There's nothing I like better than a nice cryptic explanation)And get this... Today I ran the WEI on my 2nd computer and now it's producing this same error. And yet, both computer's HDDs check out fine, There are no flags in Device Manager, and no problems elsewhere.I haven't done anything pertaining to the HDD in either machine. If I remember correctly, I noticed the problem after swapping the graphics cards between machines, although I can't understand why that would affect the HDD error in WEI. In both instances I did a clean re-install of the latest drivers. Both systems are kept clean of garbage and both are running Win7x64.
View 9 Replies View Relatedwhat the difference is between the graphics rating and gaming graphics rating in the Windows Experience Index? Which is more important? Because my graphics has the lowest subscore of 5.8 and my gaming graphics has a subscore of 6.7.
View 1 Replies View RelatedI can't run the Windows Experience Index after performing some hardware changes. Since two weeks ago when I first had the issue, I have tried rebooting, upgrading the SSD, and upgrading the graphics card. I have also done a search on Google.
Quote :
[Window Title]
Performance Information and Tools
[Main Instruction]
The Windows Experience Index for your system could not be computed.
[Content]
Could not measure system memory performance.
[Close]
[Footer]
Click here for Windows help
When the PC came, it had a rating of 4.5, the lowest being the Gaming graphics section. Right now, that section is 4.2 and has established the baseline. I did the custom option and wiped my entire hard disk, created new partitions according to my need and installed the windows on a newly created and formatted partition.
Before I began installation, I backed up a folder called 'drivers' located in the root folder of the OS partition. This is what I used to update all of my drivers after the installation.
My PC is a Dell Latitude E5410. - Operating System Microsoft Windows 7 Ultimate x86 - PC's hard drive capacity is about 240 GB but when it came it only had a single partition of 116 GB - I don't have the original disks that came with the PC.
Is there any way I can get back to my original rating?
When I run the WEI I receive an error that says video playback cannot be completed. I have updated all video drivers. I have a NVIDIA GEForce GTS 250. Below is a copy of the error log.
Code:
44448694 (3972) - winsatlogging.cpp:0815: --- START 201197 6:59:23 AM ---
44448694 (3972) - winsatmain.cpp:4301: Command Line = "C:Windowssystem32winsat.exe" formal -restart clean -cancelevent b2a9721e-8fd3-49a9-88fa-27a0fb55bc39
44448694 (3972) - winsatprocesswinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
44448725 (3972) - winsatmain.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
44448772 (3972) - winsatmain.cpp:4585: Watch dog system enabled
[code]....
I know this is nitpicky and rather insane but i have a sata 3 hard drive using a sata 3 cable plugged into a sata 3 controller and windows only rates my HDD transfer rate as 5.9 (eg sata 2) and i know this is nitpicky but what do i need to do to fix that
View 9 Replies View RelatedHow to Update or Refresh the WEI Score in Windows 7 ?
View 0 Replies View RelatedI have never gotten this to work on any of my desktop computers once I upgrade them. On the laptops, it runs fine every time. The error happens at the end and gives the normal "could not measure storage performance. error: failed to properly assess the disk. The parameter is incorrect."
View 3 Replies View RelatedWhy does Windows 7 automatically reindex my index search file when I reboot the computer.I have 300,000 files on my computer and it takes two days to rebuild the index. I leave my computer on all the time because I am afraid that by turning it off and on again will cause the indexing function to restart the index.How can I stop this reindexing function from starting on its own.
View 3 Replies View RelatedThe device and printer window is empty. Almost everything is working except blue tooth and IE9. However, there is no device or printer noted.
View 1 Replies View RelatedWhen I go to the device and printer window there is nothing listed. There are printers and devices on the computer because everything works with the exception of the Bluetooth. The printer prints, but I have no way of knowing what is in the queue. This may have never worked since the beginning. I don't know if this is related, but, Internet Explorer does not work. I have downloaded it at least 4 times with the same results. It will not open.
View 3 Replies View RelatedI got this PC 3 weeks ago. For two days now Several of my devices have a Code 10 on start up. For instance my mouse in the Device Manager window has a code 10 and will not work until I use the trouble shooter and it re-installs the driver. I have tried updating the USB drivers as many recommend but there were no updates. I tried Microsoft's fix it, and it was not fixed.
View 9 Replies View RelatedWhenever I search in Windows 7, I want to have the ability to open found folders in a new window. If I r-click, that option is not there. Is there a way to add this to Windows 7?
Also: When I go to 'open file location', the file's folder opens in the same window - highly annoying. In Vista, it opens in a new window. Anyway to change this behvior in Windows 7 to act like Vista, so the file opens in a new window?
I am running into an issue where I can open a window/program with my mouse however once the window is open I cannot click inside of it. The window becomes inactive. I also have noticed I cannot right click on my desktop to bring up the properties. I can right click on the window in the task bar to close it but not in the window. Since this is happening I am limited to command prompt. I ran sfc /scannow with no errors. I tried with 3 different mice. I booted the computer into safe mode with command prompt and brought up the device manager to show devices not in use, and when the device manager window opened I could click inside it! since I could use the window I uninstalled all mouse drivers, and reinstalled my microsoft wireless usb mouse driver.. while in this safe mode I changed my mouse properties to system default as I read somewhere that can reset things. Next I booted the computer in safe mode (without command prompt) and still the same thing. I was trying to do a restore point as well however my Kaspersky antivirus 2012 is preventing that as i cannot find a way to kill the program through command prompt.
View 5 Replies View Related