SSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
View 2 RepliesI'd like to create a backup image of a clean install of Windows + certain applications.My plan is this: Format my SSD that I am currently using. Install fresh windows 7, do all the updates, install a few choice applications, and then get an image of it to use for recovery. I have a few questions on this topic as well:
1. This is probably obvious, but I want to make sure; I can store the image wherever I like, correct? If I am using an SSD for my boot drive, I can image that, and store the image on a regular hard drive, right?
2. How big will the image be? Is it going to be as big as the entire drive that I back up? I cannot imagine how it would go any differently, but I am hoping for some unrealized magic.
3. Do I need to buy the Ghost software? If not, does it make imaging a whole lot easier to make it worth the price tag?
4. How arduous and time consuming is the actual recovery process?
p.s. Something I just thought of. I don't know how I would do the actual backup without an OS to interface with so maybe I could make the image contain everything except the basic install of windows to cut down on space and time. Is this feasible?
I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
I have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies View RelatedI have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.
View 7 Replies View RelatedWould like opinions on preferred easy full image back-up apps.
View 2 Replies View RelatedI have 3 drives in my system,
- 64gb boot Health System Active
- 640g Apps Health Primary 376gfree
- 500g storage Healthy Primary 496gfree
I'm trying to a backup with a system image, It says for the storage drive when selected that it will not do a system image. But when I select the 640, it doesn't say it won't, but will not let me choose any files from that drive. Not sure what is going on.
I am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies View RelatedI have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
I have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
new hard drive? I want to replace my slow green drive with a wd 7200 rpm black driveBefore I install windows 8. Can I use windows 7 drive image program to do this?
View 3 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedHow to Create a System Image Backup in Windows 7 ?
View 0 Replies View RelatedI need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
I used to run 2 WD Caviar Black 1TB each, I decided to get a 128gb Intel SSD, put the other 2 WD drives over to SATA port 2 and 3 with SSD on port 1. I did not format the WD drives since they both have data on it, port 2 WD still has Windows 7 installation on it.
When I started up after installing SSD, I went to BIOS to ensure everything is in working order, I noticed only 2 drives are detected, the SSD and WD on port 3. Tried several things like check connection, power connection, switched SATA cables, switched ports. Still no difference.
I went ahead and installed Windows 7 on SSD, disk manager does not detect WD on port 2.
Is it because that WD on port 2 still has windows installation files? How can I fix this? I have critical data on there that I need to access to.
My SSD boot drive died yesterday but I have a recent image. What I don't have is a boot drive right now. I'm probably going to check some prices on SSD's locally later today and pick one up since it turns out the brand I was using isn't very reliable (OCZ Agility 2 60 gig - lasted 3.5 months). Assuming I do pick up a new boot drive how should I proceed? Should I install Windows on my HDD then restore the image to the new SSD or should I install Windows to the SSD and just restore everything but Windows? Or should I be doing something totally different?
View 5 Replies View RelatedAbout to install windows 7 on an SSD as boot drive and programs/user folders on a hard drive. Does it make sense to have a primary partition on the hard drive being an image of the SSD so that I could boot from that partition in case of SSD failure?
View 6 Replies View RelatedAll discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies View RelatedI have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies View RelatedI have a Windows 7 system that had a failing boot drive. Since I build all systems with a motherboard RAID-1 array, it survived one drive failure but soon started showing problems on the remaining drive. I have the usual knotty problem of wanting to move the boot drive to a new HDD, but complicated by the fact that the new drive is a software RAID-1 array.Most of the free and trial tools will not do a disc-image copy to a software RAID setup. I downloaded the trial of Norton Ghost only to find that its disc-image feature is not enabled in the trial copy. I used Ghost to make a complete backup of the failing boot drive, skipping bad file sectors, and restored the backup to a newly created RAID-1 array. After some mucking around with repair and boot disk settings, the system will boot, but stops short of giving me a desktop - I get only a blue background, with a Windows build notice (and a bogus-copy alert) in the bottom corner. I can call up Task Manager and switch logins to an incomplete desktop.
I really don't want to buy a copy of Ghost to enable the image-copy feature only to find that it won't work on my system... and I hate having to buy such software because my very infrequent uses of it mean I get about one use out of each license. I feel like I'm one simple step from getting my backup to run correctly... can anyone point me to what file or files might have been missed, and what files I can copy from the original boot drive to make things work correctly?
I am wondering if there is a way for me to set up my computer in the following manner:
C: <- Main Boot Drive (60GB SSD)
D: <- Copy of Boot Drive (60GB SSD)
E: <- Program Drive (1TB HDD)
F: <- Storage Drive (2TB HDD)
G: <- Download Drive (500GB)
I have done the separate program and storage drive before, but I was wondering if perhaps a way to back up my boot drive without necessarily raid. It was brought to my attention that if something were to go wrong with the data then raid would automatically copy it (which makes sense), or am I worrying to much?
I am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies View Relatedi just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies View RelatedI have a windows image backup which is taking up 60gb. I need to delete it but i dont know if its safe to just delete normally.
View 2 Replies View RelatedI am trying to make a disk image in Win7 to a partition on my USB HDD.The partition is a freshly formatted 116GB. Win7 says the backup image will require up to 45GB. Yet when the backup process begins, it returns an error message saying there isn't enough disk space for the image.This is apparently a bogus message because I have saved other backup images of this PC to that partition in the past. In fact, I just re-formatted that partition to remove an older image of the same PC (same approx. size image) so I could save the fresh image to it. Can anyone tell me why Win7 insists there's not enough room on a clean 116GB partition for a 45GB image?
View 3 Replies View RelatedI recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
View 8 Replies View RelatedOne of my drives in raid0 crashed and fortunately I had windows 7 x64 backup activated and running daily. After recreating the array with the remaining drives, I tried to restore from the external usb drive but it didn't work. Apparently the problem is that I had been running "file backup" and not "image backup". Probably because when I configured backup for the first time, it asked to back up all my drives which was not possible and not needed so didn't check the image backup button.
Now the backup set is visible only from within windows (I set Windows 7 again up) but NOT from the restore part of Windows 7 setup / recovery disk. Files inside the backup set are not .vhd but zipfiles. All my c: drive files actually ARE inside the backup set, but running restore will restore all the crap folders (like c: vidia) except from the system folders like c:windows, c:program files (and x86), c:programdata etc.
Any way to restore these? I am thinking of the possibility of somehow restoring all the files and running windows repair on top of this to actually make c:drive bootable again. My users folder is not affected as I had moved it to d: but this presents the additional challenge of being able to actually make the system see the users folder....
I had a Sony laptop that originally had Vista and was upgraded to Windows 7. I recently got a new Lenovo laptop and purchased brand new application software so I could get a clean installation. After 1 month of running both systems and gradually moving material over to the Lenovo, I cleaned the Sony and did a recovery to the original, store bought condition. Now I realize that I failed to move over some pictures. I have a Windows Image of the Sony on an external hard drive. Is there a way I can get the pics from the Windows Image onto the new Lenovo?
View 7 Replies View RelatedI have a system image created in Vista with external, internal hard drive is done. i replaced internal and installed windows 7. Can i use any of the information from this system image backup? Is there anyway to read the drive and pick out some of the important files? i don't need the whole system restore but would like as much of the old info as possible.
View 1 Replies View RelatedMy laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional