Backup Drive With Windows 7 Boot File Is Not Recognized After Installing SSD
Oct 18, 2012
I used to run 2 WD Caviar Black 1TB each, I decided to get a 128gb Intel SSD, put the other 2 WD drives over to SATA port 2 and 3 with SSD on port 1. I did not format the WD drives since they both have data on it, port 2 WD still has Windows 7 installation on it.
When I started up after installing SSD, I went to BIOS to ensure everything is in working order, I noticed only 2 drives are detected, the SSD and WD on port 3. Tried several things like check connection, power connection, switched SATA cables, switched ports. Still no difference.
I went ahead and installed Windows 7 on SSD, disk manager does not detect WD on port 2.
Is it because that WD on port 2 still has windows installation files? How can I fix this? I have critical data on there that I need to access to.
Recently I changed the boot logo/screen on my computer to a custom one. When I got tired of it and wanted to change it back, I googled how I could restore it. Running the CMD as admin and typing "bcdedit %WinDir% /l en-US" would restore it back to its original boot logo. I tried it and then restarted my computer as instructed. As soon as it starts to boot up I get a message from the "Windows Boot Manager" telling me that there is a file that cannot be recognized: "windows/system32/winload.exe" My drivers for my keyboard are out of date apparently as I cant press "enter" to continue. It told me i could alternatively insert my windows 7 disc and restart. I inserted that disc and restarted and the same screen comes up.
I have a brand new set up that is running windows 7 64 bit on a ASrock H61M-GE, supports UEFI (not sure if it is automatically enabled) with a 3TB hdd that is the boot drive. There are no other hard drives available on the computer. Windows has only recognized 1.99TB of the drive in the OS, the other 7XXGB are unallocated. I would like this drive to be in "one piece" and be booted from. How should I go about making this work?
I have windows 7 with a Verbatim 1TB external drive, the system is not recognising the external drive. When I switch it off and back on again it then recognises it and loads it in My Computer. I have another external USB drive which works just fine. This problem started after I formatted the PC and reinstalled windows 7. It worked fine before under the same OS. I tried another wire and plugged it into another port but still have the same problem.
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot option and nothing showed up.
However when I look at the drive while in Vista through my computer->G: It shows up as a windows system. I've also seen somewhere about enabling "Legacy usb"? I didn't find anything like that. Should I just got buy another flash drive and try again?
SSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
About to install windows 7 on an SSD as boot drive and programs/user folders on a hard drive. Does it make sense to have a primary partition on the hard drive being an image of the SSD so that I could boot from that partition in case of SSD failure?
I have a Windows 7 system that had a failing boot drive. Since I build all systems with a motherboard RAID-1 array, it survived one drive failure but soon started showing problems on the remaining drive. I have the usual knotty problem of wanting to move the boot drive to a new HDD, but complicated by the fact that the new drive is a software RAID-1 array.Most of the free and trial tools will not do a disc-image copy to a software RAID setup. I downloaded the trial of Norton Ghost only to find that its disc-image feature is not enabled in the trial copy. I used Ghost to make a complete backup of the failing boot drive, skipping bad file sectors, and restored the backup to a newly created RAID-1 array. After some mucking around with repair and boot disk settings, the system will boot, but stops short of giving me a desktop - I get only a blue background, with a Windows build notice (and a bogus-copy alert) in the bottom corner. I can call up Task Manager and switch logins to an incomplete desktop.
I really don't want to buy a copy of Ghost to enable the image-copy feature only to find that it won't work on my system... and I hate having to buy such software because my very infrequent uses of it mean I get about one use out of each license. I feel like I'm one simple step from getting my backup to run correctly... can anyone point me to what file or files might have been missed, and what files I can copy from the original boot drive to make things work correctly?
I recently purchase an HP Pavilion G6 which comes with windows 8 so i have decided to reformat the hard drive and install windows 7. My problem now it won't boot up from the DVD drive even an USB DVD drive still won't boot up.
I have done the separate program and storage drive before, but I was wondering if perhaps a way to back up my boot drive without necessarily raid. It was brought to my attention that if something were to go wrong with the data then raid would automatically copy it (which makes sense), or am I worrying to much?
I have Windows 7 Home Premium 32 bit (x86) , trying to install on x64 architecture (dual core atom proc). I am trying to boot from the DVD, with the Autounattend.xml file on a USB drive (Mushkin 8GB, light blinks when accessed, so I know it is being read from). I have also tried using the file name Unattend.xml per other suggestions.My Autounattend.xml file does not get recognized. No errors are shown, but I explicitly set the locale, language, etc., to US English (en-Us), but I am still prompted by the Windows 7 DVD to select these settings.
I know this does not necessarily pertain to Windows installation, but I did not know where else to place this thread. I know it is possible to burn isos to a thumb drive, but is there a way to put a boot loader on a thumb drive so I can have many images on separate partitions? For example, I want to partition my 32GB thumb drive into 700MB partitions, so that I can have Clonezilla live on one, GParted on another, and maybe the Windows 7 repair disk on another. Is this possible?
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
Purchased a brand new Asus USB-BT211 bluetooth dongle with the express goal of connecting a wiimote to my new computer. the machine runs Windows 7 x64, the drivers for the dongle install without a problem, and the bluetooth searching mode on the "add a device" screen appears to be running without a hitch.
when i place the wiimote into sync mode (holding down the red button), it never appears to be visible to the computer, and doesn't show up on the add a device screen. When I attempt this procedure with either of my other two laptop computers, (running Windxows Vista x86) using the same dongle, the wiimote syncs without a problem and can be used with other utilities such as glovePIE and JoyToKey and Dolphin.
So, tell me, Why is it that Windows 7 refuses to see the wiimote when i try to make the connection?
I have an HP laptop which I recently upgraded from Windows XP Pro to Windows 7.
The flash drive (Lexar Firelfy 2GB) I was using on the XP OS can no longer be read under the Windows 7 OS. Information are stored in it (I am able to access it with computers other than mine), but my computer does not see them.
I have also tried different flash drives with the same results. Under disk management, my computer detects the flash drive but is unable to read it.
I recently installed Windows 7 Professional 32 bit on my computer. I actually installed it clean, because I had Ultimate on it; unfortunately, the copy I obtained was not genuine, so I got a genuine Professional in its stead. This problem started in, but I figured when I got a genuine copy of Windows, it would be fixed. No such luck.n is pressed; I have to stick a paperclip in the manual eject hole. The Device Manager doesn't even show that a CD Drive is installed, neither does any other program. I tried editing the registry myself and deleting the "upper filters" line, or whatever it is, but that didn't work. I have been attempting to find drivers, tools, or anything else that could help with this, but nothing seems to be working.Here are the specs for my computer: Product Specifications HP Pavilion dv2945se Entertainment Notebook PC - HP Customer Care (United States - English)
Just wondering if it's possible to make Windows backup do it in another place besides the root of another drive.It's really annoying seeing those files all the time,so I move them to a folder anyways.. which ocfourse windows fails to see then, but since I dont have a schedueled backup it's ok for now... Just need the one master backup for now, and if i add something or change something I move the files back to root to do that.
I have tried to move the hosts file location by changing the registrykeyHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersDataBasePathto the desired folder location.However, it appears that this key is somehow ignored by my system (Windows 7 64 bit) and the default location%SystemRoot%system32driversetc is still the one where the hosts file is read.I notice it because any changes made to the hosts file in the default location are detected (I check it with the ping command) and any changes to the new location are simply ignoredI have copied and pasted the hosts file with different values between the default and new folder, so I guess it is not a problem with the hosts file having the wrong format. I also copied and paste the new folder path to the registry key so it is also not a problem of having misspelled the folder path, either. I also restarted the computer after changing the registry key.
I am trying to fix a iOmega harddrive for a friend and the issue that he has is that the iOmega is not being recognized by his computer. The device has power, the disk is spinning and the led is on and stays constant, no flashing or anything. I have tried to see if the device was in Device Manager but it is not. The device is not being recognized by Windows 7 at all. No beeping noises when I plug it in or anything. I have tried multiple USB ports as well as other computers. The device just isn't being recognized.
One of my drives in raid0 crashed and fortunately I had windows 7 x64 backup activated and running daily. After recreating the array with the remaining drives, I tried to restore from the external usb drive but it didn't work. Apparently the problem is that I had been running "file backup" and not "image backup". Probably because when I configured backup for the first time, it asked to back up all my drives which was not possible and not needed so didn't check the image backup button.
Now the backup set is visible only from within windows (I set Windows 7 again up) but NOT from the restore part of Windows 7 setup / recovery disk. Files inside the backup set are not .vhd but zipfiles. All my c: drive files actually ARE inside the backup set, but running restore will restore all the crap folders (like c: vidia) except from the system folders like c:windows, c:program files (and x86), c:programdata etc.
Any way to restore these? I am thinking of the possibility of somehow restoring all the files and running windows repair on top of this to actually make c:drive bootable again. My users folder is not affected as I had moved it to d: but this presents the additional challenge of being able to actually make the system see the users folder....
I backup my files using windows backup to an external hard disk. But the backup size is smaller than the selected files. The files that are selected to be backed up are 30-40 GB, and the size of the backup shows it is only 3.7 GB. Why is this. It says its 3.7 both in the control panel for windows backup, and when looking at properties on the backup folder.
I have a toshiba laptop running on windows 7. One day I turned it on and it said "bootmgr is missing press ctrl alt delete to restart."I have been researching how to fix it and have made a repair cd, which boots it and sends me to the start up process, but when I get to the command prompt option and type "bootrec/fixboot" it says "the volume does not contain a recognized file system."
I have two external USB drives, one independently-powered, one USB-cable-powered, both with NTFS and linux ext2 and ext3 partitions. Under Windows 7 both drives show up under Device Manager with the Property: "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)".
None of their partitions show up in "My Computer". (BTW, the partitions are all good and they are all usable from the linux side of my dualboot system.) I probably disabled the guilty service(s) myself. To get Windows 7 to work reasonably, I disabled all the services I thought I wouldn't need.
Which service(s) do I have to look at to get the disks to work again? The powered disk is a Hitachi HTS545016B9A300 and the unpowered one is the internal disk from my previous laptop, a "Seagate Desktop USB Device," both as reported by the Device Manager.
I have an external Samsung 640Gb hard drive which is not showing up in Windows Explorer, even though Device Manager shows it as recognized and working properly. I am running Windows 7 Home and this is something new as when I bought the drive it showed up in Explorer. I really need this drive as all my backups and programs are on it!
I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
Does anyone know how you can backup your personal customizations to the Default File Locations (e.g., my *.txt isn't assocated with Notepad, but Notepad2).
I have a terabyte external, WD Element I think. I have never had an issues before but today I plug it in (to play Diablo III) and it is not being recognized. At all. It's not in Disk Management, I can't find it anywhere. Suggestions or reasons this might be happening out of no where??
