Flash Drive Not Recognized When Trying To Boot Win7
Oct 28, 2009
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot option and nothing showed up.
However when I look at the drive while in Vista through my computer->G: It shows up as a windows system. I've also seen somewhere about enabling "Legacy usb"? I didn't find anything like that. Should I just got buy another flash drive and try again?
I installed the Chrome OS IMG file on my flash drive and tried to boot from it, but it turns out my flash drive is now un-recognizable. I tried assigning a different drive letter in computer management, but it doesn't show up there. Sometimes it will show up and Windows will say that I need to format it, but the format always fails.Other flash drives are recognized by my computer. I am using a Lexar Jump Drive, but I'm not sure what model it is.
hard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.
WD Blue 640 GB (single HDD) AMD Phenom ii GA-MA785GM-US2H Gigabyte motherboard OS: Windows 7 Ultimate 64 bit
I have an HP laptop which I recently upgraded from Windows XP Pro to Windows 7.
The flash drive (Lexar Firelfy 2GB) I was using on the XP OS can no longer be read under the Windows 7 OS. Information are stored in it (I am able to access it with computers other than mine), but my computer does not see them.
I have also tried different flash drives with the same results. Under disk management, my computer detects the flash drive but is unable to read it.
I'm running WIN 7 on my home pc and transferred some files via a Flash Drive to a laptop running XP Pro to go on a trip. Upon my return I update my home pc with the data from laptop/FD; I've done this with no problem many times. Upon my return this time my home pc will not recognize the FD. I've updated the driver, checked Disk Management, etc all to no avail. The FD isn't recognized and neither is a second FD I tried. They both work on the laptop.
I have been using Windows 7 for about a week and it has been getting incrementally slower every day.
Here are the steps I have taken so far:
I have disabled every service I can disable without compromising the functionality of the OS. This includes Superfetch and Indexing.
I have cleaned out MSConfig of booting anything that isn't necessary.
I have disabled transparency on Aero
My CPU is hanging at around 50% usage per core and my ram goes up to 97% usage about 5 minutes after bootup and stays there. The page file has been increased to 4Gb.
Dual Nvidia GeForce 7600 GS. These are not currently in SLI as I can't find any Nvidia drivers that have functional SLI. The 2nd card is currently sitting in error state, don't know if this could be something to do with it.
I have attached some images which I hope will make diagnosis easier.
My other problem is that Windows 7 reads my Sandisk U3 Cruzer memory stick as unallocated space when XP picks it up no problem. It was formatted to FAT32. I reformatted it to NTFS, but still the same issue.
Basically, i want to transfer my music collection to my usb drive, but when i do so it transfers about 70% and then it says "could not find this item - this item is no longer located in...." it says that the item is not longer located on my usb... but i was trying to transfer it from my pc to my usb so it should be put on there. It says this for like 380 items which is the rest of the data i wanted to transfer.
I wondered why it said it was no longer located on my usb, then when i looked on my computer, it shows my usb (and other flash drives on my computer) as unformatted, it just says there FAT32 format and when i click on it, they show as empty, even though i know thers alot of things on there.
Basically to fix this i have to restart my pc and then its all fine again, my flash drives show up fine and they are formatted and the files on them can be accessed.
But not all the music is on my flash drive so i have to transfer the rest over again like i did before, this time it transfers some and then has the same problem and i have to restart. Eventually i can get all the music on my usb after restarting a few more times.
My question is... why is this happening? ive no idea why but my flash drives just show up as unformatted half way through. There must be a way to stop this or something.
I have windows 7 with a Verbatim 1TB external drive, the system is not recognising the external drive. When I switch it off and back on again it then recognises it and loads it in My Computer. I have another external USB drive which works just fine. This problem started after I formatted the PC and reinstalled windows 7. It worked fine before under the same OS. I tried another wire and plugged it into another port but still have the same problem.
I have a brand new set up that is running windows 7 64 bit on a ASrock H61M-GE, supports UEFI (not sure if it is automatically enabled) with a 3TB hdd that is the boot drive. There are no other hard drives available on the computer. Windows has only recognized 1.99TB of the drive in the OS, the other 7XXGB are unallocated. I would like this drive to be in "one piece" and be booted from. How should I go about making this work?
I used to run 2 WD Caviar Black 1TB each, I decided to get a 128gb Intel SSD, put the other 2 WD drives over to SATA port 2 and 3 with SSD on port 1. I did not format the WD drives since they both have data on it, port 2 WD still has Windows 7 installation on it.
When I started up after installing SSD, I went to BIOS to ensure everything is in working order, I noticed only 2 drives are detected, the SSD and WD on port 3. Tried several things like check connection, power connection, switched SATA cables, switched ports. Still no difference.
I went ahead and installed Windows 7 on SSD, disk manager does not detect WD on port 2.
Is it because that WD on port 2 still has windows installation files? How can I fix this? I have critical data on there that I need to access to.
I have a simple xp 32 computer and would like to dual boot (from a partition) with windows 7. my problem seems to lie in whether i have enable my usb to be bootable as a dvd install of windows 7. it seems very complicated, and i am interested in figuring out whether it was possible to simply create the partition (with gpart) than in windows mount windows 7 and when it asks where it wants to be installed, I would than chose my new partition.
I don't know... (don't want to screw up) I hope this makes sense...
I really would like to try widows 7, and any help would be very much appreciated .
I have had 1000 issues, but i'm going to try and narrow it down. it seems like everytime I try to fix a computer, nothing ever just does what it is supposed to.At the moment I created a boot drive out of my flash drive with windows 7. I set it to boot first on my bios and it loads but hangs up on the first background screen after the windows logo and nothing happens.This info may help. I have two hard drives plugged in (IDE). the master is the one I want to do a clean install of windows. The slave drive already has windows and if I boot from it I can get to the desktop, but the problem is when I try to run the install from it and the computer restarts after the second step in the install for the main HD, it doesn't try to continue the install. Ive been working on this for a week.
Original Installation Disc which the PC is currently running (Vista x64 OEM) Windows 7 Technet Disc Fresh Ubuntu 9.1 (for testing purposes, also failed to boot)
I've tried: multiple discs each with a fresh download and burned .iso changing boot priority going through the Boot Menu to select the USB-FDD or CD-ROM options
But the computer boots right through each of the medias.
I can see that my USB and DVD-rom drive are both lighting up.. during before the screen launches to the big Windows Vista logo screen.
I have a HP desktop that came with Vista, I partitioned my C drive (which already had a small partition from HP for the recovery stuff labeled D and made a "S" drive for the Windows 7 install.
I installed the copy of Windows 7 i made from the official ISO from MS and it works ok as long as the DVD is still in the drive...it asks to press any key to boot from cd or DVD, I leave it alone then my option screen comes up and I can pick from either vista or Windows 7 just fine. If the DVD is NOT in the drive then the options I have are either vista or "Windows Setup" and in that case I get
File: $WINDOWS..~BTWindowsSystem32winload.exe
Status: 0xc000000f
selected entry couuld not be loaded cuz missing or corrupt
I tried to do the automatic reapair in the Windows 7 installer and sometimes it would come up as finding an error and says it fixed but most of the time it says there is nothing wrong.
I am running XP on a SATA HDD. I have installed Win 7 on a second partition with some problems. The main problem was random BSOD's. This I believe, I have traced back to the fact that the MoBo runs Nvidia chips. Have downloaded the updated Nvidia Win 7 chip drivers. So, I uninstalled Win 7 and removed boot loader via BCDEDIT.
What I would now like to try is to install Win 7 on a separate IDE HDD connected to the primary IDE controller. This is so I can sort out the Nvidia driver problem.
I can see problems with this. My questions are the following: What will I set the IDE HDD to be, Master or Slave? Then boot off DVD/ROM and then install Win 7 as normal onto IDE HDD. If yes, I take it that the Windows 7 bootloader will not be installed on the XP SATA HDD. If this is the case then I should be able to use EasyBCD to add the XP on the SATA HDD. Most critical part of the whole deal will be to set the SATA HDD (with XP) to boot FIRST. I have been down this track before and the MoBo sets the IDE as Drive 0 (FIRST boot HDD).
I know that there is a simple answer to this. I just cannot see the forest for the trees at present.
The last couple of times I've booted up Windows 7, prior to launching the OS, It has felt the need to perform some sort of drive error checking task, and as far as I know, I haven't scheduled any 'checking for errors' type-tasks for my hard drive.
I have Windows 7 Ult-64 installed on my desktop. I made a USB flash drive with the installation files, so I know I can boot using a flash drive. I would like to be able to boot into Windows 7 using only a flash drive (no hard drives connected). Is this possible?
get a USB 3.0 flash drive to boot from a 3.0 port?I made a bootable ADATA 16GB USB 3.0 flash drive using LIli. Also used Yumi to make bootable flash drive. Either way it will not boot when plugged in a USB 3 port.It does not show up using BBS popup(F8). Nor does it show up in the bios.It will boot when plugged in a USB 2.0 port.Also, I can make a bootable USB 2.0 flash drive and can boot from it when plugged in 3.0 port. It shows up in the bios and the BBS popup. I have tried everything possible. No luck. I'm stumped. I have the latest bios and driver for this Renesas Electronics USB 3.0 Host Controller.
I have f* up my MBR partition(FAT32, is invalid now) and now W7 won't start. I haveen't made a rescue CD, as my lappy has no CD/DVD drive. Is there a tool to start W7 via USB port?
I recently isntalled windows 7 professional and I have three sata drives, one is the system drive where windows 7 is installed (C, my primary partition, the other is a storage drive (F and a drive to replace the partition (Z. My boot priority for the moment is the F: drive then the C:. This is because for some reason my C: drive, even though the system is installed on it, will not boot.
I tried several things like copying the hidden system folder in F:Boot to the C drive but that did not work. I recently did a repair install but that did not restore the boot manager. Is there a way to manually set my C: drive as my primary boot drive, without jumping through hoops, I bought the Z drive to replace the F drive and need to be able to boot without it.
I have windows XP pro 32 bit installed in C drive and then installed clean win 7 64bit in drive D. Everything works properly but when I boot from XP, it is in C drive and I see Windows 7 in D drive, when I boot from Windows 7, I see win 7 in C and winXP in D drive. Is it normal or is there any I can do to fix win Xp in C and Windows 7 in D?
Does anyone know of a way to take several different ISO's (multiple Windows ISO'sUbuntu, Hiren's Boot CD, etc.) and put them onto a flash drive from which I can boot and select one?I've tried several different utilities thus far - unetbootin, YUMI,XBoot - but none have allowed me to successfully add all my images.
For security reasons, I would like to create a windows 7 X64 boot USB flash Drive , not an install drive. A drive where when I remove it, the system will not boot. What files do I need to put on the drive, or is there a progrm I can use to create it?
I am using a few USB sticks for readyboost and always have them in my hub. One of them was temporarily used to create an Ubuntu Live stick, but now that I removed Ubuntu from it about 32Mb remain used and I assume there is some bootable info in it, as Windows 7 is no longer booting with this stick inserted. I have tried formatting but this does not help. Is there a way to wipe the USB stick clean and remove any boot sector info?
[Solved] Setting up Dual Boot on a flash drive that isn't always plugged in. I have windows 7 Home Premium installed on my desktop but I was hoping for a way to set up an installation of Windows XP on a 16GB flash drive that I have.
Not even thinking I just figured I would give it a try and I booted to my Windows XP disc and installed all of the files to the flash drive. Well needless to say it messed up my MBR and then wouldn't boot to the flash drive or to my internal hard drives anymore.
I was able to fix it by using the Windows 7 disc to repair startup but I still am not able to boot to Windows XP on the flash drive.
Is there any way to do this? I know I need to make some changes to the bootloader but I'm not sure exactly what to do. Is there a way to make it so it will automatically boot Windows 7 unless I put the flash drive in first and prompt it to as the computer starts up?
FIX (with SavePart, tried other partition utilities and editing MountedDevices to no avail)
Hope this helps someone else with Wrong Drive Letter Problems
Installed Windows 7 RC and all was well with XP Dual Boot.
After some experimenting(BSD,LINUX,etc), Windows 7 would not boot, so popped in the DVD and let Windows 7 repair the boot.
Windows 7 now booted, but when booting XP on E: , it was now assigned the wrong Drive letter D: and would boot to just before the Logon Prompt and hang(same in safe mode.)
After much research and trial (including editing the HKLM/SYSTEM/MountedDevices hive of the XP install from within Windows 7 to change the drive letter) this was the fix.
This particular XP boots from Partition/Drive E: in Windows.0 directory (yeah, i know, been this way for years)
Is there a way I can remove all the partitions from my Hard drive and do a full format (not quick)? The windows 7 install disc does a quick format but I would like to clean it thoroughly. Is there a utility I can use at boot time to do this?
I have a WD Passport 160GB portable HDD, which worked fine in XP on the same computer before I installed Windows 7.
As many other people experienced, the once the device is connected, it will show USB device not recognized. However, my mouse and keyboard, which are USB also, are working flawlessly.
Besides the Passport, I have a Maxtor External HDD which is not working also, I tried every single USB port on the computer and it just won't work. And this one is powered by a small power adapter, so it should not be anything related to USB power. On the other hand, the Maxtor HDD is visible from BIOS, just not in Windows 7.
My computer is single boot Windows 7 RC 64bit, clean install.
I'm using Q6600, Foxconn MARS P35 mobo, Seagate 7200.10 250GB HDD, PNY 8600GT, OCZ 2x2GB DDR2 800 ram. I don't think the hardware have any problem since in XP everything worked fine, and all the drivers are up to date according to the device manager in Windows 7.
i mounted my windows 7 iso with daemon, opened my cmd/disk part window and cleaned, partitioned, formated, and assigned the drive letter and then xcopied my mount to the flash drive, but it wont show up during boot up. i've done this a million times and its worked with this computer. im using the poopy mobo out of the a6430f hp computer. its an asus mobo.
I'm currently running Windows XP (SP3)and am trying to run the Windows 7 Home Premium upgrade. Each time the installation gets to the point of starting to erase the XP program files and load the Win 7 files and stops with a statement that it doesn't recognize the C partition where XP is installed. The PC has a single SATA HD with only a single partition. Is there some step that's left of the installation instructions that I could be missing?
