Installed Win7, System Will Not Boot From Proper Drive
Oct 11, 2009
I recently isntalled windows 7 professional and I have three sata drives, one is the system drive where windows 7 is installed (C, my primary partition, the other is a storage drive (F and a drive to replace the partition (Z. My boot priority for the moment is the F: drive then the C:. This is because for some reason my C: drive, even though the system is installed on it, will not boot.
I tried several things like copying the hidden system folder in F:Boot to the C drive but that did not work. I recently did a repair install but that did not restore the boot manager. Is there a way to manually set my C: drive as my primary boot drive, without jumping through hoops, I bought the Z drive to replace the F drive and need to be able to boot without it.
im trying to dual boot windows 7 beside my already installed vista HP , when i try shrink my c partition with the inbuilt vista partition tool , to create room for the windows 7 partition , it will only allow me to shrink roughly 2000 MB of the drive even though there is 45% of a 250 GB drive still available .
they reccomend at least 16GB of free space to install it,
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
guyz i lost my 2 partitions of hard drive namely f:,g: . (i have 5 partitions "c,d,e,f,g). i had Windows 7 installed and then installed xp on drive e: , so i lost 2 partitions f:,g: which were invisible in windows explorer . the partitions got extended automatically and showed as unpartitioned space when inserting and running from windows 7 disc . then how to recover the data stored on these drives??????? and how to recover the data stored on these drives after formatting that unpartitioned space/extended space or "previously my f: and g: drives"?
I recently had to force shut down my Asus g73jh laptop because it was being extremely slow. Now when I turn it on it tells me to "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key" I don't have the windows 7 repair cd.
Son changed C: drive to Z: Not cannot get computer to boot to proper drive, nor can I figure how how to rename drive back to C: How can this be done? Cannot access any of my files, etc., and (of course) Windows 7 installation disk does not work.
Trying to play a game and since it's Jap, I had to change the system locale to Japan. After rebooting, because it requires a reboot, I got a BSOD in about a minute. I thought it was okay and wouldn't happen again because it ran out of memory or something. After I reboot, I got another BSOD and now it's saying "Reboot or insert proper boot device.
I went to the BIOS and my HD was the first boot priority. I'm a total noobie when it comes to computers.
I have an ASUS K52F-BBR5 Notebook. Could my HD be corrupted or is there a way to fix this? I'm currently finding my installation disk to see if I can do a startup repair.
I have a new (replacement for a failed drive) Hitachi 500GB HDD that I'm trying to install Windows 7 64 bit on (full install disk). I have Win XP 32 on drive D: of another drive and want to dual boot. I used PMagic to partition the new drive into 2 250 GB partitions, the first as C: drive, active and primary---formatted NTFS. Thinking I would install on that partition.
When I run install on Windows 7 64 I get to the window where you can select upgrade or custom and I select custom install and select the c: drive. I then get a cannot find a system drive error message. I went bak and removed the partitions thinking maybe it would work on unallocated drive space same error message. I deleted the partition inside Windows 7 from the same screen and formated it there too and still get the same message. Diagnostics show that the drive is good. What am I doing wrong?
I have a simple xp 32 computer and would like to dual boot (from a partition) with windows 7. my problem seems to lie in whether i have enable my usb to be bootable as a dvd install of windows 7. it seems very complicated, and i am interested in figuring out whether it was possible to simply create the partition (with gpart) than in windows mount windows 7 and when it asks where it wants to be installed, I would than chose my new partition.
I don't know... (don't want to screw up) I hope this makes sense...
I really would like to try widows 7, and any help would be very much appreciated .
I have a 260 GB SSD with my Windows 7 system on it, and I connected an old laptop HDD. Afterwards, it booted from the laptop HDD, and I did some perusing to run my Windows 7 disk and boot from that to "activate" my OS on my SSD.I tried this, but it doesn't display anything. I have disconnected all of the other HDDs (two laptop HDDs total) and now nothing is listed in terms of disks with Windows on it. It says, "If your operating system isn't listed, click Load Drivers and then install drivers for your hard disks." I can do this, and it brings up my SSD with all of the folders. Would this be a place to load a driver? I am not sure what I am looking for.I have spent about an hour looking elsewhere online but it doesn't seem that any body else has had my problem (or I wasn't able to find it). It recognizes my SSD in the BIOS, but it simply won't load from it. As well, when it was loading from my laptop HDD's OS (Windows 7 Professional 64-bit), I was able to access my C: drive (the SSD) and all of its folders.
I have a HP desktop that came with Vista, I partitioned my C drive (which already had a small partition from HP for the recovery stuff labeled D and made a "S" drive for the Windows 7 install.
I installed the copy of Windows 7 i made from the official ISO from MS and it works ok as long as the DVD is still in the drive...it asks to press any key to boot from cd or DVD, I leave it alone then my option screen comes up and I can pick from either vista or Windows 7 just fine. If the DVD is NOT in the drive then the options I have are either vista or "Windows Setup" and in that case I get
File: $WINDOWS..~BTWindowsSystem32winload.exe
Status: 0xc000000f
selected entry couuld not be loaded cuz missing or corrupt
I tried to do the automatic reapair in the Windows 7 installer and sometimes it would come up as finding an error and says it fixed but most of the time it says there is nothing wrong.
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot option and nothing showed up.
However when I look at the drive while in Vista through my computer->G: It shows up as a windows system. I've also seen somewhere about enabling "Legacy usb"? I didn't find anything like that. Should I just got buy another flash drive and try again?
I am running XP on a SATA HDD. I have installed Win 7 on a second partition with some problems. The main problem was random BSOD's. This I believe, I have traced back to the fact that the MoBo runs Nvidia chips. Have downloaded the updated Nvidia Win 7 chip drivers. So, I uninstalled Win 7 and removed boot loader via BCDEDIT.
What I would now like to try is to install Win 7 on a separate IDE HDD connected to the primary IDE controller. This is so I can sort out the Nvidia driver problem.
I can see problems with this. My questions are the following: What will I set the IDE HDD to be, Master or Slave? Then boot off DVD/ROM and then install Win 7 as normal onto IDE HDD. If yes, I take it that the Windows 7 bootloader will not be installed on the XP SATA HDD. If this is the case then I should be able to use EasyBCD to add the XP on the SATA HDD. Most critical part of the whole deal will be to set the SATA HDD (with XP) to boot FIRST. I have been down this track before and the MoBo sets the IDE as Drive 0 (FIRST boot HDD).
I know that there is a simple answer to this. I just cannot see the forest for the trees at present.
The last couple of times I've booted up Windows 7, prior to launching the OS, It has felt the need to perform some sort of drive error checking task, and as far as I know, I haven't scheduled any 'checking for errors' type-tasks for my hard drive.
I have a custom built system. windows 7 installed but it will not start up in this system. A friend put the hard drive into his system and Windows started up fine on his. I ran the memory check on windows and it never said that there were problems but you have to be able to get into windows to see the report so i can't be totally sure. The motherboard was sent back and checked by the mfg. and i doubt that the processor could be bad if it was able to install windows 7 onto the hard drive.
I recently purchased a Microsoft Wireless 3000 keyboard new. After plugging in the USB receiver and installing the batteries to the keyboard, it seemed everything was going to work. The noise came on that a USB device had been plugged in and it then installed the proper drivers. When I tried to type or use any function on the keyboard, though, it was unresponsive-the keys don't work.
I then tried the following troubleshooting: 1) unplugged my older keyboard (Logitech Office Pro Keyboard PS/2). Then I tried rebooting with it still I unplugged. 2) Inserted the installation disc that came with the new keyboard. I window popped up saying that the program (intelliType) cannot be opened because it is being blocked for compatibility issues. (that is all it said-no cause stated). Restarted computer and tried it again-same outcome. 3) Downloaded the latest driver from the Microsoft website . I made sure it was the exact format for my computer (Windows 7, 64-bit, Keyboard Version 2.0). Installed it fine. I am able to open the intellitype program and configure the various key functions. No response from keyboard though. Restarted computer-nothing changed. 4) Uninstalled (what I could) the Logitech software SetPoint. From my perusal on the internet, it seems it is a very difficult program to uninstall. I deleted the folders from my c: Drive. It was not listed in 'Programs and Features' 5) Uninstalled the intellitype software, rebooted, and let the OS install the generic drivers for the Microsoft keyboard. 6) I went into the BIOS and noticed that the USB Keyboard function was disabled. I enabled it and the other USB functions (mouse, etc.) options were enabled. 7) Replaced the batteries twice-both brand new. The green light next to the battery symbol on the keyboard comes on for a moment after I install the batteries. 8) Tried different USB ports for the wireless receiver. Each time there is that sound that notifies a USB device has been plugged in. The OS even recognizes that it is a wireless receiver. Rebooted computer.
I even tried rebooting with the old keyboard disconnected but I am forced to plug it back in eventually as I have no other way of typing. The keyboard is recognized in device manager (Microsoft Hardware USB Keyboard, Microsoft USB Dual Receiver Wireless Keyboard (IntelliType Pro), Microsoft Mouse and Keyboard Detection Driver). Currently, the IntelliType software is loaded and the SetPoint software uninstalled. Could it be a faulty keyboard?
I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
I have windows XP pro 32 bit installed in C drive and then installed clean win 7 64bit in drive D. Everything works properly but when I boot from XP, it is in C drive and I see Windows 7 in D drive, when I boot from Windows 7, I see win 7 in C and winXP in D drive. Is it normal or is there any I can do to fix win Xp in C and Windows 7 in D?
Boot files etc have installed on C and not system reserved, why?Is it because I increased the size of the system reserved and then (maybe I) left the larger partition highlighted by mistake?I used Windows own install disk to format etc.
FIX (with SavePart, tried other partition utilities and editing MountedDevices to no avail)
Hope this helps someone else with Wrong Drive Letter Problems
Installed Windows 7 RC and all was well with XP Dual Boot.
After some experimenting(BSD,LINUX,etc), Windows 7 would not boot, so popped in the DVD and let Windows 7 repair the boot.
Windows 7 now booted, but when booting XP on E: , it was now assigned the wrong Drive letter D: and would boot to just before the Logon Prompt and hang(same in safe mode.)
After much research and trial (including editing the HKLM/SYSTEM/MountedDevices hive of the XP install from within Windows 7 to change the drive letter) this was the fix.
This particular XP boots from Partition/Drive E: in Windows.0 directory (yeah, i know, been this way for years)
Is there a way I can remove all the partitions from my Hard drive and do a full format (not quick)? The windows 7 install disc does a quick format but I would like to clean it thoroughly. Is there a utility I can use at boot time to do this?
Here's the deal: I've bought a new 1.5TB hard drive for my PC to replace the 320GB one in there at the moment (turning it into a HTPC). Problem is, it's one of those mini-tower PCs and it only has the one hard drive slot. This means it's re-installation time!
So the question is, what do you lot think would be the best way of setting up Windows 7 on this new drive, hopefully keeping as much as possible of my current setup? As far as I can work out, my options are as follows:Use the Windows Backup thing to do a complete PC backup, installing Windows on the new hard drive, then restoring the system from the backup. Use a Linux live CD and use Partimage to create an image of the system partition which I can then put on the new hard drive and hope it boots (obviously once the MBR is sorted, etc). Just install Windows on the new hard drive and set everything up again from scratch. The hard drive arrives in 2 days, so what do you reckon?
I just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.
I just installed a new WD 500 GB hard drive into my DELL computer. I am trying to install windows 7 from a dvd but it will not boot. Does anyone know what the problem is.
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive intel core i5-2500k ASUS P8Z68-V LX iHas 124b
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3 1 TB Samsung Spinpoint F3 HD103SJ Intel Core i5 2500K Corsair 8GB 1600 mhz Scythe Mugen 2 rev B GeForce GTX 570 Lian Li Lancool PC-K56 Corsair CX 600W Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority: 1st boot Hard Drive 2nd boot cd/dvd/cd-rw drive 3rd boot USB storage 4th boot Diskette drive 5th boot eSATA 6th boot Network
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive intel core i5-2500k ASUS P8Z68-V LX iHas 124b
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
