I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 RepliesI recently isntalled windows 7 professional and I have three sata drives, one is the system drive where windows 7 is installed (C, my primary partition, the other is a storage drive (F and a drive to replace the partition (Z. My boot priority for the moment is the F: drive then the C:. This is because for some reason my C: drive, even though the system is installed on it, will not boot.
I tried several things like copying the hidden system folder in F:Boot to the C drive but that did not work. I recently did a repair install but that did not restore the boot manager. Is there a way to manually set my C: drive as my primary boot drive, without jumping through hoops, I bought the Z drive to replace the F drive and need to be able to boot without it.
I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
I have a HP Pavilion with Windows 7 Premium 64, and have my computer back up daily, with weekly system image back ups using the Windows back up utility. This backs up to a DLink DNS 323 network storage device. Last Friday my hard drive failed, and I didn't feel too bad becuase of my back ups. Yesterday after replacing the hard drive I tried using the System Repair Disc to restore the System Image, but couldn't locate anything on the network to restore. I checked with DLink support and they said this is a Windows issue. Hoping I can get some ideas how to proceed and get my data on the new hard drive. THe DLink site suggested that I try everything out before I need it to make sure it all works as planned. I would have no idea how to try out the System Repair Disc and restore the System Image without having a blank hard drive or jeopardizing the data on my current drive.
View 9 Replies View RelatedI have 3 drives in my system,
- 64gb boot Health System Active
- 640g Apps Health Primary 376gfree
- 500g storage Healthy Primary 496gfree
I'm trying to a backup with a system image, It says for the storage drive when selected that it will not do a system image. But when I select the 640, it doesn't say it won't, but will not let me choose any files from that drive. Not sure what is going on.
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View RelatedHere's the deal: I've bought a new 1.5TB hard drive for my PC to replace the 320GB one in there at the moment (turning it into a HTPC). Problem is, it's one of those mini-tower PCs and it only has the one hard drive slot. This means it's re-installation time!
So the question is, what do you lot think would be the best way of setting up Windows 7 on this new drive, hopefully keeping as much as possible of my current setup? As far as I can work out, my options are as follows:Use the Windows Backup thing to do a complete PC backup, installing Windows on the new hard drive, then restoring the system from the backup. Use a Linux live CD and use Partimage to create an image of the system partition which I can then put on the new hard drive and hope it boots (obviously once the MBR is sorted, etc). Just install Windows on the new hard drive and set everything up again from scratch. The hard drive arrives in 2 days, so what do you reckon?
I have got a 60gb SDD from which I boot my OS and a 1tb HDD which acts as my storage drive. Most things I can direct to the HDD, but occasionally I find that despite directing a program to install on my HDD (E: drive) its will install on BOTH the HDD AND the SSD (C: drive). For example: I created a directory on the HDD into which I installed the game AION. I then checked my SSD and saw that it was almost full and that the game had not only stored on the HDD but also the SSD.I would like to avoid this as my gbs are precious few (I have already optimized my SSD to get rid of un-needed clutter, etc.). I would like to understand the behaviour of these programs and also get your opinion on if its safe for me just to DELETE the AION folder from my c: drive (without having to go through the whole DL process again).
View 5 Replies View RelatedI just installed a new WD 500 GB hard drive into my DELL computer. I am trying to install windows 7 from a dvd but it will not boot. Does anyone know what the problem is.
View 8 Replies View RelatedI just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.
View 1 Replies View RelatedI recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies View RelatedI installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies View RelatedI have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies View RelatedI have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies View RelatedFirst, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
View 8 Replies View RelatedI have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedI recently reorganized my computer and this included a fresh install of Windows 7 on a new disk. I backed up all my data on the old disk so that I could make sure I wasn't losing any important documents or whatever.I'm now sure I've got everything off the disk that I needed and am using the disk as a storage disk for media. However, there are still folders that I can't seem to erase in the Program Files, Program Files (x86), and Windows directories. Most of the files are gone but about 12GB of junk remains that I no longer need. Whenever I try to delete what is left, it says I need permission from TrustedInstaller and it won't let me delete these files.Is there any way to blow these directories away without having to format the disk? I really can't format because the disk is almost full with data that I need to keep and I don't really have any other disks to temporarily back these files up to.
View 6 Replies View RelatedI made the mistake of putting W7 on a small partition of the 160GB D drive. I was not aware that much of windows 7 programing would not allow me to change the destination to install and insists on installing on the OS drive. I am looking for a way to copy, move or coerce all of the current system onto another drive without erasing that drive.
View 13 Replies View RelatedWell, I did a dual-boot system with Vista 32-bit and 7 64-bit. Now the problem is that, when I'm in Vista, the drive letter of Vista would be C: and 7 would be in B:.
But when I'm in 7, its partition would have the letter C: while Vista would have B:.
Is this normal? What would happen if I installed a program on the path C: in Windows 7?
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies View RelatedSo I've been collecting extra parts on the side for a while, and finally got around to throwing them all in a rig yesterday.[code] Now it boots fine and happy. I went to install windows from a dvd, the installer saw both hard drives but told me that "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk" for both. Something about both of them saying that told me it wasn't something wrong with the hdds, especially because the 120gb one was fresh out of a antistatic bag that was sealed from the factory :. I went into bios to figure out why, and after looking around I found a utility called "Super Recovery". It basically allows you to manually put in a reserved system partition on the hard drive that windows usually automatically puts on your hard drive of like 100mb. I did that to the 120, and boom, windows allowed me to install onto it. Windows finished installed completely, and went to restart. My boot priority has always been Hard Drive -> then CD-ROM. The system trys to boot from the hard drive, then gets nothing and boots from the cd again. If I take the cd out, it sits there for a bit, then tells you that you need to insert a system disk. The 120gb hdd is pinned to master mode, and the 80gb is pinned for slave. They are plugged into their respective master and slave plugs on the IDE cable.
View 12 Replies View RelatedHow to reduce D Drive and increase C Drive
View 2 Replies View RelatedI already have windows 7 Ulitmate x86 but 1 day I came up with an idea of giving a try on x64 one by dual booting.. So I downloaded it legally from microsoft and I did every procedures required for the install. Shrunk my C drive and installed the OS on the unallocated free space on the drive and it went on perfectly. But the problem is the System Reserved partition showed up on the x86 OS. every time i open My Computer i can see the system reserved partition.
I could accidentally do something wrong with the partition if it remains unhidden so I want to hide it. I was thinking of changing the drive letter but I afraid that's going to give me boot problem. In disk management the System Reserved is labelled Z and marked as active. I tried to set my other partition as active that day but the pc cannot boot at all not even the boot manager showed up. However I managed to fix it using my recovery disc to access the cmd and reactivate the Z drive using diskpart.
I'm obviously brand new to the forums so I hope this is the right place for this. I should start with my type of drive; I have a 120gb Cherryville SSD from Intel serving as my C: Drive. Just the other night I had approximately 43GB left in my C: Drive (note this is incredibly low as well, but I was content). Last night I checked again and saw that I was down to 25! I performed a disk defrag and that actually decreased my storage to 23! I am absolutely puzzled as to the cause of this.
The only thing I have done between the time that I had over 40 and last night was update my visual BIOS (having nothing to do with my C: Drive at all) and download a simple XML update for Microsoft Expressions (which was measured in kilobytes). Granted I have done my fair share of updating .net framework and various other updates, but all of my major programs are on my hard drive, not my SSD. To put this into visual perspective, I'd like to share a photo showing around 25GB of space taken that is absolutely nowhere to be found, I find it hard to believe that Windows and a few programs can take up nearly 90GB of storage.
I just formatted my computer. i used to have a windows drive, and a storage drive that was almost full. i installed windows on the windows drive, and didn't touch the storage drive. after windows booted up, i assigned a letter to the storage drive and i was able to see it in my computers folder. but now i have new problem: i can't install games or anything onto the harddrive. they say something like: can't create file. but, i can paste files into it.
View 3 Replies View RelatedHow can I transfer files from my XP machine to a Win 7 machine. I have a SSD for the boot drive and a 750 for storage?
View 1 Replies View Relatedmy desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies View RelatedHow to Use GMail Drive 8GB as Local Storage ?
View 0 Replies View Relatedi just finished partitioning a hdd for the first time. It will be my storage drive (former boot Win7) drive complimenting a Corsair 115GB boot ssd. This is my first build?
f: 500GB for music, movie, pics and docs.
g: 230GB for installed programs and relocated windows folders. (Windows page files and user's folders)
h: the balance is unallocated at this time. Reserved for maybe umbutu/xp,etc.
1. Would it be better to install programs on f:, if so should I shrink it ?
2. Do you think the size of each is adequate?
3. Slould I install the Gpu drivers to the SSD?
4. Is is bad to keep changing and deleting volumes?
5. Should I partition the SSD boot in 2, one for OS 1 for games.