Installed New Hard Drive On HP Pavillion Dv6 / Boot Disk Not Working
Jul 22, 2012
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
I just installed a new WD 500 GB hard drive into my DELL computer. I am trying to install windows 7 from a dvd but it will not boot. Does anyone know what the problem is.
I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
I have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
Intel E2180 CPU 2GB Ram Gigabyte GA-G31M-S2C Mainboard Seagate ST31000340NS SATA Hard Drive Connected on SATA0 Operating Systems: Windows 7 Ultimate 64Bit on HDD Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
First, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
i installed windows 7 recently then after some while i did that "system rating" thing. right clicking on "computer" - "properties" - then there's "manufacturer" "model" then "rating" in the "system" section. while doing that power went off, because i didn't have the battery on and the charger got unplugged. i restarted the laptop and a message came up telling me that "operating system not found". so i decided to re-install windows 7. then after a while a message came up telling me that there is no hard disk installed. and press f3 to restart
I recently installed windows 7 and when installing I did like 3 partitions of the hard disk but after it finished installing I saw only one hard disk driver. When formatting a massage occurred saying it will create a system partition something like that.....
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
I installed windows 7 ultimate, i did not just upgrade I did the more advanced install. I iinstalled it on a HP pavillion g series that was already running windows 7. I did back it up fully. However, the problem is that it is now not recognizing a properly installed network adapter.
my 1 tb wd harddisk is not being detected by the system. so i opened my cpu and got that afted being power up my system, the hdd is vibrating (rotating) for a while then it stops. i have some important files on it and i dont know waht to do.
My HP Pavilion DV7 4267CL's hard drive went out last week. I bought a new one, the same brand name and specifications. I installed the drive, turned it on, inserted the first disc, restarted it and follow the prompts. I selected to reset factory default and continue to follow the on screen prompts. After installing all four discs, it restarted by itself and gave me an HP logo. It ask me to restart to complete installation. When it restarted again, it gave me a bootmgr is missing press ctrl+alt+delete to restart. I pressed it and it gave me the same error again. I did all the reinstallation 3x but no luck. I was getting the same error. So, I went to the bio boot utility by restarting the pc and preesing F10 while booting. I rearrange the booting sequence, dvd/cd rom drive, internal computer hard drive restarted it, inserted the first disc, turned off pc and reinstalled it and all 3 other discs. But at the end, I'm still getting the same error.
I just added a new hard drive to replace the old one that is apparently corrupted. And I'm not sure what I did wrong. I was told to unplug the power supply and the old hd. Add the new one, and power it back up with the Windows 7 installation dvd. Did that and in trying to change the order in witch it boots to cd-rom, it shows sata hd not present? I don't know why, I replaced the cords in the right place. Do I need to configure it, if so how?
Hard drive does not show up in either 'My Computer' or in device manager. building my own pc. I built this one from the ground up basically by myself with no problems. Ive taught myself everything i do know and this is beyond my knowledge. Is there anything i could have done wrong? when i restart the pc it shows up as S.M.A.R.T Error. or something along those lines. Windows 7 64 bit, any other information needed will be provided.
To boot up. Here's my issue I have a HP Desk top with a standard 320 GB hard Drive. I bought a new Hard drive (1 TB Western Digital) so that I could move everything to the new one and use the old one as storage. I had trouble even formatting the new drive but eventually got it and successfully installed a full version of Win 7. (The old hard drive has Win Vista with Win 7 upgrade on it. When I boot up the computer I receive a message asking which WIN 7. I want to use and actually either one works.
I wanted to format my old drive so that I would only have one Operating system w/ WIN 7 installed. I tried to format it (the old drive) at the command prompt, but alas it wouldn't let me. So, I opened the case and disconnected the power cord first and then I unplugged the SATA cable as well as the power cable to the hard drive. I tried to re-start the computer but now it says cannot find something, unable to read or error. So, I take it something is missing from the new Windows 7 install to my new hard drive?
i have unplugged my hard drive from my pc and plugged back in then this message comes up "reboot or select proper boot device or insert boot media in boot device and press a key"
My company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
Here's the deal: I've bought a new 1.5TB hard drive for my PC to replace the 320GB one in there at the moment (turning it into a HTPC). Problem is, it's one of those mini-tower PCs and it only has the one hard drive slot. This means it's re-installation time!
So the question is, what do you lot think would be the best way of setting up Windows 7 on this new drive, hopefully keeping as much as possible of my current setup? As far as I can work out, my options are as follows:Use the Windows Backup thing to do a complete PC backup, installing Windows on the new hard drive, then restoring the system from the backup. Use a Linux live CD and use Partimage to create an image of the system partition which I can then put on the new hard drive and hope it boots (obviously once the MBR is sorted, etc). Just install Windows on the new hard drive and set everything up again from scratch. The hard drive arrives in 2 days, so what do you reckon?
First time poster here. I messed up big time trying to get my dell 1747 to dual boot in xp and win 7, i think. I installed xp on to an external hard drive via and esata connection. Now it won't boot without the external hard drive connected and of course will only boot in xp. The xp disc manager say that windows 7 is the primary os which confused me. I Tried the windows 7 recovery disc but it won't boot. I'm completely lost here, and I'm looking for the first step to take. AS it stands I have a C:RECOVERY, D:Fantom(my external to which i installed xp) and E: OS, why is E labeled OS? I could really use some help here.I can't uninstall xp in safe mode with administrator access. I'm wondering if i format the D drive containing Windows xp, if I will Automatically boot from my previous windows 7?
No success getting windows 7 to install with 2 TB sata hard drive. It reads on BIOS but when installer setup for W7 it stops in the beginning with "required cd/dvd driver missing"; asking you to go ahead and remove your installer disk for that particular step only.
I was booting off an ssd originally and have a regular hdd as backup. then i had to get my laptop repaired. i removed the ssd and shipped the laptop off. upon receiving it, i popped my hard drive back in and changed the boot settings in bios to my ssd instead of the hdd.it boots just fine, but my wallpaper was gone and i cant access certain things like my computer, control panel, etc. an error pops up saying that it wont initialize.is there a procedure i must do? i tried sfc scannow and it restored my desktop, but it said somethings were unable to be repaired. im also wondering how come it didnt just work right away as if i never sent it in for repairs. i stumbled upon a guide that said how to re register my dlls.
I just got a new comp, w/ win7. I just took the HD from my old comp, and added it 2 the new system, hoping that i could run some programs from it on the new comp, (because i've lost install cd's etc..) Everythings fine except, I cant run any of the programs. Like, Old drive has Microsoft Digital Media Edition. I tried to open it & run the install, but the new comp says.. cant access registry. New unit is win 7, old one was xp, sp2. anything i can do to use my old programs? can i copy the drive onto the win 7 hd?
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
