Installed Windows 7 And Disk Drive No Longer Works
Oct 10, 2010after installing windows 7 operating system, i cannot use my external disk drive.everytime I insert a CD/DVD it recognizes it but does not run it.
View 3 Repliesafter installing windows 7 operating system, i cannot use my external disk drive.everytime I insert a CD/DVD it recognizes it but does not run it.
View 3 RepliesI installed Windows 7 Ultimate x64 and now my built in webcam no longer works. I have a Toshiba Satellite L510-016. I am unsure of the webcam model itself as no information seems to pop up for it anywhere on my computer. I have tried installing drivers with no success.
View 9 Replies View RelatedI upgraded from windows vista home premium to windows 7 ultimate. Now my tsstcorp ts-t632a cd/dvdw device no longer works. I uninstalled the device and drivers then restarted my computer. That did not work.
View 1 Replies View RelatedMy DVD drive no longer works on my Asus N81VP-D1. If I connect my laptop hard drive to another computer and then install windows 7 to the harddrive using that computer and then put the harddrive back in my laptop, will it work?
View 4 Replies View RelatedI installed a hard drive and upon installing drivers for my nvidia gtx 460, it just gave me a black screen once I got to the login screen. Went back in to safe mode and got older drivers, that didn't work either. I have tried 4 versions of the older drivers and it all goes exactly the same. Clean install of windows 7 Home Premium 64. Or do I just need to get a new motherboard/videocard? Also I have a dual monitor setup and the second monitor doesn't get a signal.
View 8 Replies View RelatedWe used to use ZetaFax, I'm told. I'm new to the company. We no longer use ZetaFax. Since bringing in Windows Vista Business and Windows 7 Pro computers, and Windows 2008 Server, we now use Windows Fax and Scan.We use Fax Server on the server with quad port RocketModems installed.Now, here's the problem.Some of our employees are having problems using Windows Fax and Scan. The way they use faxing is by finding the file (usually an Adobe Acrobat pdf), open it and then go to the Fax printer.This then auto faxes the document using Windows Fax and Scan.For most of our employees, this works fine.But, suddenly for some it does not work. When I visit the ones who can't fax, I open Windows Fax and Scan and try to launch it. It does not launch. On some of the computers, the user gets a message that the format must be tif. For others, they get a message saying that they can not access to the document folder.I'd like to remove Windows Fax and Scan on these computers and try to reinstall it and see what happens. How can I do that?
View 4 Replies View RelatedI have just recently built a new computer and am trying to use my older vga monitor with it. The monitor displayed fine while installing the os but after it finished the monitor goes right into sleep mode. I updated all my drivers for the onboard video and my video card and have switched between the two in my bios trying to make it work. So far the monitor displays up to the loading windows screen then goes straight into sleep mode. The most annoying thing is that the monitor works fine as a secondary monitor, just not a primary.
View 3 Replies View RelatedWe have a script that installs an application on a user's box. It can run on XP, Vista, Win 7.... So it uses the ver command and find to figure out what the os is. It used to run on my win 7 box. It no longer does. The find command now gets an error. I tried substituting findstr and it returns a good completion code regardless! The grep command works great but most machines don't have grep so that is not an option to use. I would just like to figure out why find doesn't work. The date for find.exe in the System32 folder says 7/13/2009. Is there something I can do to restore find? Listed below is the the command & output that helps determine the OS version using find/findstr/grep
View 1 Replies View RelatedI use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
I have a Sceptre X20WG Naga 20.1" monitor on a DVI connection with my EVGA GTX460 card. I was using it yesterday while studying for finals and decided to hook up my 37" Westinghouse TV via VGA connection, using a VGA-to-DVI converter to plug into the graphics card, as the card only has dual-DVI and mini-HDMI outputs. It was working grand as a second screen, no issue at all. Now, today, I turned on my computer and my Sceptre Monitor wasn't outputting any images at all, it just said no signal detected and then went to sleep, though my computer was still on.
So I turned on the TV out of curiosity and found that the TV was now the main screen, still with the VGA connection, and I hadn't unplugged anything since yesterday. So I logged in and right-clicked on the desktop, went to screen resolution, and here it says that the TV is the only screen detected, even after hitting detect. So I unplugged the VGA from to TV and plugged it into the Sceptre Monitor. Turned on the computer and the monitor worked like a charm on the VGA cable. I also plugged the DVI cable that I was using for the monitor into the TV and that worked like a champ too.
The only reason this is bugging me is because I won't always be using the TV as a main display because it's kinda of a pain to sit close to a screen that big. So I am currently on this forum while my monitor is using the VGA connection. It also seems to vary from which DVI port I use on the videocard because if I plug the VGA cable with converter into the 2nd port, there is no video output, but if it's in the first port, works great. I'm going to try just the DVI cable to the TV on each card port to see what the deal is there.
So basically:
The cable isn't the problem.
The VGA needs to be in the 1st DVI port on the card to work.
The DVI doesn't work at all when hooked up to the monitor.
What I want is to be able to use DVI on the monitor and VGA on the TV.
Specs:
Intel Core 2 Quad Kentsfield Q6600 2.4GHz @3.0GHz
8Gb Kingston ValuRam DDR3-1333
Asus P5G41T-M LX Mobo
EVGA GTX460(2x Dual link DVI and 1x mini HDMI)
Windows 7 Professional x64
Just did a clean install of Windows 7 Pro on an HP dc7700, got the drivers fixed then did and update of windows. After doing the updates, Internet Explorer 8 no longer works. Can still connect to our server, but no outside connectivity.
View 7 Replies View RelatedI have a wireless logitech headphone. The speakers work ok for the most part, but, the mic does not always work unless I manually configure it for the headphone. And after I get done talking it very often reverts back to the builtin mic. a blog but they saw it on dv9000 (I think). There was a solution given for that driver but not for my dv2700.
View 1 Replies View RelatedI just got this new computer, running 64-bit Windows 7 Home Premium. Everything was working fine at first, but then it automatically updated some things. Now, Flash doesn't work online anymore, in any browser. The content starts to load, then the browser freezes, and I have to force quit it.
I have the most recent version of Flash Player, and I can still play .swf files I make myself, so I don't know what to do anymore.
I'm fairly sure that this isn't an isolated problem, as a friend of mine is experiencing the same thing.
In a possibly related problem, .avi and other video files on my hard drive no longer play, nor do music files.
I doubt my specs are needed, since this is almost certainly a software problem, but I'm running on a Dell Studio, with a 2GHz dual core processor and with 4Gb of RAM.
So I opened up my tower to do some dusting and I accidentally dropped the tower door and the wires that power the tower door fan was ripped off. There was a red and black wire that has these weird looking prongs on them. I first did not know where they went... So I just looked at the 4 pin whole plugs and started to stick these two in these plugs to test... First few times I did this; the pc restarted and there was a spark....(could this be y my background no longer works?) Then I found two holes out of the four pinned plugs that powered my fan.. Hurray I thought cause the fan was powered, the blue light was on and I was happy for that moment. Then I realized my background was just a blank color.. So I right clicked/personalize/desktop background/ set up the photos I saved/hit save changes. and nothing. no background.
View 6 Replies View RelatedWindows 7 Ultimate, 32 bit. Not on a domain. After I installed SP1, "Switch User" disappeared as an option. "Hide entry points for Fast User Switching" in GP Editor is set to Not Configured.
I also checked the Application Information service as Andre suggested, and it was not running. I started it, set it to automatic startup, and rebooted. Still no joy.
I have uninstalled SP1, and I now have the option to switch users as I did before installing SP1.
I'd prefer to keep my system updated, but for this system anyway, the ability to switch users as opposed to logging off is more important.
I guess I'm just having a series of minor problems.The function of the right click on my mouse no longer works. I get a rotating circle that eventually states the Windows can not solve the problem.
View 2 Replies View Relatedi noticed that my PC had been using a lot of the SSD for information i felt should be saved on the HD. i read some forms and someone said that the C:USERS folder can simply be dragged to the HD so that everything is saved there. so i copied it onto my other HD and renamed it USERS2. unfortunately i noticed that this didnt and doesnt work and for some reason the USERS folder on my SSD has gotten renamed to USERS2 as well and the Catalyst Control Center application no longer works... i dont know how to fix it and im afraid that i might dig myself further into this mess.
View 7 Replies View RelatedNew to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
View 8 Replies View RelatedWhen I plug in or unplug my external display to my laptop, my display options no longer automatically reconfigure as they used to do. Now if I unplug the monitor, Windows acts as if it's still there, and windows that were on the monitor stay offscreen (as does the cursor, if that's where it was). I can manually move the cursor back, right-click load graphics properties and make changes OR do an F-key combo to move everything back on the laptop screen OR program a hotkey but these are all pretty annoying for one reason or another. Unfortunately this must have started happening sometime in the last two weeks--at the same time as I made a load of major computer changes.
However this did NOT include a graphics driver change (my graphics driver is current). At this point I feel it could be anything, but I'm wondering if it could be a recent BIOS update I did that HP recommended. By way of troubleshooting I did run Windows in safe mode with ONLY the "ATI Catalyst" and "AMD External Events utility" running on top of the basic services, in case a newly installed service was stealing hotplugging messages, but that didn't do anything. I've also gone exhaustively through my graphics driver settings to make sure everything there looks correct.
a few days ago on boot up my laptop restarted and then attempted windows repair. came back to life. tonight while viewing Internet my screen went black. i had to hold the power button down to restart. i chose start windows normally. when attempting to load windows i got a blue screen saying "attemp to restart display driver has timed out". after a few attempts i have managed to get it into safe mode and deleted the nvidia graphics driver. restarted and all was fine (low resolution). i installed the graphix driver again an it happened again. is my graphics card broke?
alienware m7700 d900k
amd athlon 64 x2 4600+
geforce 6800 ultra
windows 7 64
2gig ram
the nvidia driver does not detect my graphix card so i have to add it in the setup information file. but i have had no problems for about nine month since i bought this laptop second hand.
i joined this site for another problem a few days ago. slow speeds and constant hdd access but had a good clean out and was going to see how it went. then this happened. i do not think they are related.
Do you have any free downloads to help Microsoft Works Version 4.5a to work with Windows 7?
View 3 Replies View RelatedNow Windows 7 does not start from the new drive, I get "a disk read error occurred".Then I bootet from a Windows 7 rescue CD and used these commands without success:bootrec /fixmbrbootrec /fixbootI even recovered the BCD with these commands:Bcdedit /export C:BCD_BackupBootrec /rebuildbcdI have no clue what else I could do now. The partition is marked active. The Windows 7 partition is readable from within Linux, I can see everything there. I ran chkdsk from the rescue CD with no success.
View 7 Replies View RelatedI'm currently trying to find a solution to a situation with my PC. I am able to install programs (ex: Skype, etc), but when I reboot my machine or turn it off and back again, the program I just installed does not appear on my hard drive at all. Any files I save (Word Document, Excel, favorites from Internet Explorer) doesn't appear or retain when I reboot my machine. I suspected a virus attack so I ran a virus scan with AVG but it doesn't find any viruses or errors.
View 2 Replies View Relatedso i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedI am trying to install Windows 7 on a new computer and i keep getting this error message. "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk. ensure that the disk's controller is enabled in the computer's BIOS menu."I am also trying to run RAID 5 on this system, i have x4 1.5T HD.
View 2 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
My Windows DVD Maker no longer shows my DVD drive E as default DVD burner. Instead, I got a "DVD burner not found" error message when I tried to burn a video to DVD.
View 1 Replies View RelatedI have a two HDD setup with a newer Western Digital Caviar Black 500GB as my secondary drive. It stores all my bigger files such as video games, videos, and so on. Whenever I try to optimize that hard drive using Disk Cleanup or Disk Defragmenter, it doesn't seem to execute the program. The hard drive is running and DC and DD have it on their list but when I use DC it would just come up with 0 mb to clean every time and DD always run a lot faster than the smaller primary drive which is also Western Digital. Is there somewhere in Windows 7 configuration that I need to change to enable the disk to be optimized?
View 4 Replies View RelatedSo I am getting this error (Windows cannot be installed on this disk. The disk may fail soon) when I am trying to re-install Windows on my pc.I have tried running UbuntU to check for errors on my HD but it seems to just freeze up everytime I try to run it. And i tried to run the WD Diag504.iso for my WD20EARS HD but its telling my I need and earlier version or some crap, but I know that I have the correct version.
View 8 Replies View RelatedJust got a Corsair Force 3 120GB SSD and want to do a clean install of Windows 7 64bit on to it.However, when I get to the 'Where do you want to install windows?' screen, I get the error message:'Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu.
View 14 Replies View Relatedwindows cannot be installed to disk,this computer's hardware may not support booting to disk,ensure that the disk controller is enabled in the computer bios menu.windows cannot be installed in this disk, the disk may fail soon, if the other hard disk are available,install windows to another location.
View 4 Replies View Related