I have a wireless logitech headphone. The speakers work ok for the most part, but, the mic does not always work unless I manually configure it for the headphone. And after I get done talking it very often reverts back to the builtin mic. a blog but they saw it on dv9000 (I think). There was a solution given for that driver but not for my dv2700.
View 1 Replies
When I plug in or unplug my external display to my laptop, my display options no longer automatically reconfigure as they used to do. Now if I unplug the monitor, Windows acts as if it's still there, and windows that were on the monitor stay offscreen (as does the cursor, if that's where it was). I can manually move the cursor back, right-click load graphics properties and make changes OR do an F-key combo to move everything back on the laptop screen OR program a hotkey but these are all pretty annoying for one reason or another. Unfortunately this must have started happening sometime in the last two weeks--at the same time as I made a load of major computer changes.
However this did NOT include a graphics driver change (my graphics driver is current). At this point I feel it could be anything, but I'm wondering if it could be a recent BIOS update I did that HP recommended. By way of troubleshooting I did run Windows in safe mode with ONLY the "ATI Catalyst" and "AMD External Events utility" running on top of the basic services, in case a newly installed service was stealing hotplugging messages, but that didn't do anything. I've also gone exhaustively through my graphics driver settings to make sure everything there looks correct.
I upgraded to windows 7 a while back and I recently discovered that I can no longer access my webcam (built-in) anymore. I have a HP Pavilion dv6 Notebook PC. I have tried searching for it in all my files and I've chhecked 'Devices and printers but have had no luck. Although my webcam still works for skype and I've have looked for it's files whilst it has been on but I can't find anything
View 1 Replies View RelatedSo I just upgraded from a GTX 560 TI to a GTX 670 and now my computer can't detect my second monitor. My main monitor is plugged in via DVI while my second computer is plugged in via HDMI. I've been on nvidia control panel and tried finding my second monitor there on the "multiple monitors" section, no second monitor there either.
View 2 Replies View RelatedWe used to use ZetaFax, I'm told. I'm new to the company. We no longer use ZetaFax. Since bringing in Windows Vista Business and Windows 7 Pro computers, and Windows 2008 Server, we now use Windows Fax and Scan.We use Fax Server on the server with quad port RocketModems installed.Now, here's the problem.Some of our employees are having problems using Windows Fax and Scan. The way they use faxing is by finding the file (usually an Adobe Acrobat pdf), open it and then go to the Fax printer.This then auto faxes the document using Windows Fax and Scan.For most of our employees, this works fine.But, suddenly for some it does not work. When I visit the ones who can't fax, I open Windows Fax and Scan and try to launch it. It does not launch. On some of the computers, the user gets a message that the format must be tif. For others, they get a message saying that they can not access to the document folder.I'd like to remove Windows Fax and Scan on these computers and try to reinstall it and see what happens. How can I do that?
View 4 Replies View RelatedI have just recently built a new computer and am trying to use my older vga monitor with it. The monitor displayed fine while installing the os but after it finished the monitor goes right into sleep mode. I updated all my drivers for the onboard video and my video card and have switched between the two in my bios trying to make it work. So far the monitor displays up to the loading windows screen then goes straight into sleep mode. The most annoying thing is that the monitor works fine as a secondary monitor, just not a primary.
View 3 Replies View RelatedWe have a script that installs an application on a user's box. It can run on XP, Vista, Win 7.... So it uses the ver command and find to figure out what the os is. It used to run on my win 7 box. It no longer does. The find command now gets an error. I tried substituting findstr and it returns a good completion code regardless! The grep command works great but most machines don't have grep so that is not an option to use. I would just like to figure out why find doesn't work. The date for find.exe in the System32 folder says 7/13/2009. Is there something I can do to restore find? Listed below is the the command & output that helps determine the OS version using find/findstr/grep
View 1 Replies View RelatedI have a Sceptre X20WG Naga 20.1" monitor on a DVI connection with my EVGA GTX460 card. I was using it yesterday while studying for finals and decided to hook up my 37" Westinghouse TV via VGA connection, using a VGA-to-DVI converter to plug into the graphics card, as the card only has dual-DVI and mini-HDMI outputs. It was working grand as a second screen, no issue at all. Now, today, I turned on my computer and my Sceptre Monitor wasn't outputting any images at all, it just said no signal detected and then went to sleep, though my computer was still on.
So I turned on the TV out of curiosity and found that the TV was now the main screen, still with the VGA connection, and I hadn't unplugged anything since yesterday. So I logged in and right-clicked on the desktop, went to screen resolution, and here it says that the TV is the only screen detected, even after hitting detect. So I unplugged the VGA from to TV and plugged it into the Sceptre Monitor. Turned on the computer and the monitor worked like a charm on the VGA cable. I also plugged the DVI cable that I was using for the monitor into the TV and that worked like a champ too.
The only reason this is bugging me is because I won't always be using the TV as a main display because it's kinda of a pain to sit close to a screen that big. So I am currently on this forum while my monitor is using the VGA connection. It also seems to vary from which DVI port I use on the videocard because if I plug the VGA cable with converter into the 2nd port, there is no video output, but if it's in the first port, works great. I'm going to try just the DVI cable to the TV on each card port to see what the deal is there.
So basically:
The cable isn't the problem.
The VGA needs to be in the 1st DVI port on the card to work.
The DVI doesn't work at all when hooked up to the monitor.
What I want is to be able to use DVI on the monitor and VGA on the TV.
Specs:
Intel Core 2 Quad Kentsfield Q6600 2.4GHz @3.0GHz
8Gb Kingston ValuRam DDR3-1333
Asus P5G41T-M LX Mobo
EVGA GTX460(2x Dual link DVI and 1x mini HDMI)
Windows 7 Professional x64
I installed Windows 7 Ultimate x64 and now my built in webcam no longer works. I have a Toshiba Satellite L510-016. I am unsure of the webcam model itself as no information seems to pop up for it anywhere on my computer. I have tried installing drivers with no success.
View 9 Replies View Relatedafter installing windows 7 operating system, i cannot use my external disk drive.everytime I insert a CD/DVD it recognizes it but does not run it.
View 3 Replies View RelatedJust did a clean install of Windows 7 Pro on an HP dc7700, got the drivers fixed then did and update of windows. After doing the updates, Internet Explorer 8 no longer works. Can still connect to our server, but no outside connectivity.
View 7 Replies View RelatedThis is probably not possible but I thought I would ask anyway.I have my 5.1 headphones plugged into my ASUS Xonar D2X, and my desktop speakers plugged into my onboard sound.What I want to know is there a way for Windows, or a third party program, to automatically play any 5.1 sound through the soundcard, and any stereo sound through the onboard sound?I am currently just manually changing the default device to what is needed which is a slight annoyance.
View 1 Replies View RelatedI upgraded from windows vista home premium to windows 7 ultimate. Now my tsstcorp ts-t632a cd/dvdw device no longer works. I uninstalled the device and drivers then restarted my computer. That did not work.
View 1 Replies View RelatedI have a Sony laptop with hdmi output.
I keep my hdmi plugged in as a watch dvd's everynight through media center, onto my 32" tv.
The thing is, the sound taskbar used to automatically switch from hdmi to the laptop's soundcard automatically. It doesn't any more. Basically, if I turn off the hdmi mode on my tv, it used to switch from hdmi sound output to laptop's card. When I activate hdmi again, it would automatically switch to hdmi output.
I'm using the nvidia provided drivers via windows update.
I just got this new computer, running 64-bit Windows 7 Home Premium. Everything was working fine at first, but then it automatically updated some things. Now, Flash doesn't work online anymore, in any browser. The content starts to load, then the browser freezes, and I have to force quit it.
I have the most recent version of Flash Player, and I can still play .swf files I make myself, so I don't know what to do anymore.
I'm fairly sure that this isn't an isolated problem, as a friend of mine is experiencing the same thing.
In a possibly related problem, .avi and other video files on my hard drive no longer play, nor do music files.
I doubt my specs are needed, since this is almost certainly a software problem, but I'm running on a Dell Studio, with a 2GHz dual core processor and with 4Gb of RAM.
So I opened up my tower to do some dusting and I accidentally dropped the tower door and the wires that power the tower door fan was ripped off. There was a red and black wire that has these weird looking prongs on them. I first did not know where they went... So I just looked at the 4 pin whole plugs and started to stick these two in these plugs to test... First few times I did this; the pc restarted and there was a spark....(could this be y my background no longer works?) Then I found two holes out of the four pinned plugs that powered my fan.. Hurray I thought cause the fan was powered, the blue light was on and I was happy for that moment. Then I realized my background was just a blank color.. So I right clicked/personalize/desktop background/ set up the photos I saved/hit save changes. and nothing. no background.
View 6 Replies View RelatedWindows 7 Ultimate, 32 bit. Not on a domain. After I installed SP1, "Switch User" disappeared as an option. "Hide entry points for Fast User Switching" in GP Editor is set to Not Configured.
I also checked the Application Information service as Andre suggested, and it was not running. I started it, set it to automatic startup, and rebooted. Still no joy.
I have uninstalled SP1, and I now have the option to switch users as I did before installing SP1.
I'd prefer to keep my system updated, but for this system anyway, the ability to switch users as opposed to logging off is more important.
I guess I'm just having a series of minor problems.The function of the right click on my mouse no longer works. I get a rotating circle that eventually states the Windows can not solve the problem.
View 2 Replies View RelatedMy DVD drive no longer works on my Asus N81VP-D1. If I connect my laptop hard drive to another computer and then install windows 7 to the harddrive using that computer and then put the harddrive back in my laptop, will it work?
View 4 Replies View RelatedI installed a hard drive and upon installing drivers for my nvidia gtx 460, it just gave me a black screen once I got to the login screen. Went back in to safe mode and got older drivers, that didn't work either. I have tried 4 versions of the older drivers and it all goes exactly the same. Clean install of windows 7 Home Premium 64. Or do I just need to get a new motherboard/videocard? Also I have a dual monitor setup and the second monitor doesn't get a signal.
View 8 Replies View Relatedi noticed that my PC had been using a lot of the SSD for information i felt should be saved on the HD. i read some forms and someone said that the C:USERS folder can simply be dragged to the HD so that everything is saved there. so i copied it onto my other HD and renamed it USERS2. unfortunately i noticed that this didnt and doesnt work and for some reason the USERS folder on my SSD has gotten renamed to USERS2 as well and the Catalyst Control Center application no longer works... i dont know how to fix it and im afraid that i might dig myself further into this mess.
View 7 Replies View RelatedI have a Razor mouse ( the Lachesis) which has the ability to store profiles -of polling rates and DPI- and switch these profiles as it sees the desired program. I use two profiles. One is for the "Steam.exe" for my on-line gaming. When I launch Steam, the mouse sees the exe, and switches to this max polling/DPI profile. The other profile is the "Normal" profile which is set at a much slower, less twitchy speed. On XP, I was able to find the Windows "Explorer.exe" in CWindowsSystem32. I set this as my switching exe.and it caused the mouse to switch to the "Normal" profile when it saw the desktop. I can't find the "Explorer.exe" in System32 in Windows 7. Is there no such thing in Windows 7 (Enterprise) or is there another exe. I can use for the same purpose of switching, on seeing the desktop?
View 7 Replies View Relateda few days ago on boot up my laptop restarted and then attempted windows repair. came back to life. tonight while viewing Internet my screen went black. i had to hold the power button down to restart. i chose start windows normally. when attempting to load windows i got a blue screen saying "attemp to restart display driver has timed out". after a few attempts i have managed to get it into safe mode and deleted the nvidia graphics driver. restarted and all was fine (low resolution). i installed the graphix driver again an it happened again. is my graphics card broke?
alienware m7700 d900k
amd athlon 64 x2 4600+
geforce 6800 ultra
windows 7 64
2gig ram
the nvidia driver does not detect my graphix card so i have to add it in the setup information file. but i have had no problems for about nine month since i bought this laptop second hand.
i joined this site for another problem a few days ago. slow speeds and constant hdd access but had a good clean out and was going to see how it went. then this happened. i do not think they are related.
Whenever I switch user accounts the computer will start the switch and then lock up with a display message that says no signal on the monitor. It happens if the computer has been running for hours or only a couple of minutes. I have to shut the PC off and leave it off for 20-30 minutes. I can then restart and enter any user account. But if I try to switch user or logoff and pick a different user the whole cycle begins anew.
View 4 Replies View RelatedI use windows 7.When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.
View 9 Replies View RelatedI bought a Asus U36J laptop back in April of last year and ever since then I have been beating around an issue that I dont seem to be able to resolve one way or the other. When ever the laptop is on battery and in battery saving mode it has my taskbar on autohide. If I turn that off, then it stays off right until it is put back into battery saving mode at which point it is "magically" ticked on again.
Is there no way to simply disable that feature, as its annoying me greatly. I know its tied into the battery saving desktop, and I want to keep the battery saving desktop but want a full taskbar all the time. I found a supposed fix to make that happen, and while it actually makes the taskbar appear all the time, it still is a bad hack as any windows I have open wont "attach" to the taskbar but attaches to the buttom of the screen.
So for the love of god is there no sane way for me to keep the battery saving desktop but get rid of the autohiding taskbar. Otherwise I know Asus most likely wont be my laptop of choice next time aroumd.
I used Winmail with Vista, had the message about no email client installed with W7,What is best advice here, need to recover all my mail folders.A quick Google shows that Winmail is but hidden, do I mess about and try & enable this? Or is there a better approach.?
View 1 Replies View RelatedI have a Dell 1525, bought in Aug 2008, with 2GB RAM. I recently upgraded from Vista 32-bit to Win 7 32-bit. I am thinking about adding 2GB RAM, for total of 4GB and upgrading to Win 7 64-bit OS.
Can I just upgrade to the 64-bit version using the 64-bit disk that came with my Win 7 upgrade package?
Will it have to be a "clean install"?
Should I add the new RAM before or after changing to the 64-bit version of Win 7?
Will I be able to buy the upgraded version of win7 if I only own full ME and just upgrade XP. When I reloaded XP fresh, it asks for ME disk before I reload XP, Whats OK by me its just hard to tell from the win7 box if upgraded XP is enough to only buy upgraded win7, I'd like to save a buck and buy other PC parts.
View 12 Replies View RelatedI'm currently running a Dell Dimension machine which was purchased with Windows XP (OEM) originally installed on it and has since been upgraded to Windows 7 Home Premium. Even though the original installation of XP was obviously OEM, when I upgraded to Win 7 did it change to a retail licence key and therefore now allows me to install Win 7 on a new machine that I'm building?The new machine will have components out of the old machine and therefore the old one will not be able to be used, but it will be a different MB, CPU and RAM.
View 8 Replies View RelatedI'm convinced that that is the problem. I have tried EVERYTHING else to get the USB ports to work, but still no luck. They will not recognize any devices that I plug into the computer. Here are the specs (copied from hp.com):
Hardware
Product Nameze2108wm
US Product NumberEA390UA#ABA
Microprocessor1.6GHz AMD Mobile Sempron™ Processor 2800+ with PowerNow!™ Technology
Microprocessor Cache256KB L2 Cache
[Code].....
I found a Windows.old file under the C drive, so that's what I figure happened.
Is there any way to make the USB drives work without having to revert to Windows XP? Also, are the ports not working simply because the drivers are not compatible with Win 7, or is there another problem (probably something simple and then I'll feel like an idiot =/ )?
