New Hard Drive, Video No Longer Works
Sep 24, 2012
I installed a hard drive and upon installing drivers for my nvidia gtx 460, it just gave me a black screen once I got to the login screen. Went back in to safe mode and got older drivers, that didn't work either. I have tried 4 versions of the older drivers and it all goes exactly the same. Clean install of windows 7 Home Premium 64. Or do I just need to get a new motherboard/videocard? Also I have a dual monitor setup and the second monitor doesn't get a signal.
View 8 Replies
ADVERTISEMENT
Jan 10, 2012
I upgraded from windows vista home premium to windows 7 ultimate. Now my tsstcorp ts-t632a cd/dvdw device no longer works. I uninstalled the device and drivers then restarted my computer. That did not work.
View 1 Replies
View Related
Jul 9, 2011
My DVD drive no longer works on my Asus N81VP-D1. If I connect my laptop hard drive to another computer and then install windows 7 to the harddrive using that computer and then put the harddrive back in my laptop, will it work?
View 4 Replies
View Related
Oct 10, 2010
after installing windows 7 operating system, i cannot use my external disk drive.everytime I insert a CD/DVD it recognizes it but does not run it.
View 3 Replies
View Related
Jan 22, 2012
On a Compaq laptop, the dvd burner does not work, but it will play a CD.
View 1 Replies
View Related
Dec 7, 2011
I have a Western Digital 1TB Hard Drive (External).I use it 99.9% of the time on my Windows 7 64bit computer to store pictures/videos and backup important files.It was working fine until I plugged it into a MACINTRASH to backup files from that computer.It was a simple copy and paste from the MACINTRASH to the External HDD.After copying the files from the MACINTRASH, I plugged it back into my PC.My PC no longer recognizes my external HDD. I unplugged the power, plugged it back in.Same with the USB cable. Rebooted. Then my computer wouldn't reboot and windows did its automatic self repair. Nothing.I unplugged EVERYTHING and left it that way for about 30 minutes. I plugged EVERYTHING back to my computer and turned it on.
Windows booted up fine. I plugged in the external HDD and windows had that little icon telling me it was installing drivers. I was excited to think that it finally would recognize my external HDD.Of course, it didn't work. The HDD does not show up in my computer. It does show up in Device Manager and Disk ManagementDevice MangerUnder Disk Drives it lists it only as "WD" My other drives it has a nice long name like "WD 7500AAK External USB Device" Under properties it tells me Volume information for the disk cannot be found. (The very first time I did that prior to the reboot it said there was 0MB of space on it). It claims the device is working properly Disk ManagementAt first this said that I must initialize my disk. Now it doesn't even show up anymore. I have no idea what to do anymore.
View 9 Replies
View Related
Nov 27, 2011
I recently built a new computer and connected my old hard drive to copy files across to my new one. Both drives had Windows 7 installed and while staring up I had to select one to boot from. I have since removed my old hard drive but am still asked to select one to boot from even though there is now only one connected. How do I remove my old hard drive so that it will automatically boot from the new one?
View 8 Replies
View Related
Jan 19, 2012
I'm running into issues recently with a number of Windows 7 pc's where the hard disk will no longer be accessible. If I use startup repair, it will fail and not detect the disk or not even reach the recovery options screen. If I plug the drive into another windows pc, it will want to initialize and format.I can plug the disk into a mac or linux and am able to read / write to the disk as normal. The only way i've overcome this so far is to reformat the drive.
View 3 Replies
View Related
Sep 23, 2012
I've had my partitions over several drives set for many months. Suddenly on boot this morning, one of the partitions isn't recognized by Windows (7 64-bit). My partition software (EaseUS Partition Manager Pro) does "see" it and shows the correct division of used and unused space. This is an NTFS partition with 11.86 GB capacity and 2.50 GB used. The status is None and the type is logical.The error message box title is "Location is not available". The message is:H: is not accessible.The file or directory is corrupted and unreadable.I've had no activity in this partition for several days. The partitions on either side are fine (fingers crossed they stay that way!). They same the same characteristics (although obviously different capacities) as the missing partition.
View 1 Replies
View Related
Oct 19, 2012
I have a terabyte external, WD Element I think. I have never had an issues before but today I plug it in (to play Diablo III) and it is not being recognized. At all. It's not in Disk Management, I can't find it anywhere. Suggestions or reasons this might be happening out of no where??
View 1 Replies
View Related
Jan 10, 2013
I originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64
Motherboard: Gigabyte GA-Z77X-UD3H
Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
View 1 Replies
View Related
Oct 23, 2011
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies
View Related
Aug 14, 2011
I use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
View 1 Replies
View Related
Oct 18, 2012
Almost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
View 6 Replies
View Related
Dec 28, 2009
I just got this new computer, running 64-bit Windows 7 Home Premium. Everything was working fine at first, but then it automatically updated some things. Now, Flash doesn't work online anymore, in any browser. The content starts to load, then the browser freezes, and I have to force quit it.
I have the most recent version of Flash Player, and I can still play .swf files I make myself, so I don't know what to do anymore.
I'm fairly sure that this isn't an isolated problem, as a friend of mine is experiencing the same thing.
In a possibly related problem, .avi and other video files on my hard drive no longer play, nor do music files.
I doubt my specs are needed, since this is almost certainly a software problem, but I'm running on a Dell Studio, with a 2GHz dual core processor and with 4Gb of RAM.
View 6 Replies
View Related
May 3, 2011
We used to use ZetaFax, I'm told. I'm new to the company. We no longer use ZetaFax. Since bringing in Windows Vista Business and Windows 7 Pro computers, and Windows 2008 Server, we now use Windows Fax and Scan.We use Fax Server on the server with quad port RocketModems installed.Now, here's the problem.Some of our employees are having problems using Windows Fax and Scan. The way they use faxing is by finding the file (usually an Adobe Acrobat pdf), open it and then go to the Fax printer.This then auto faxes the document using Windows Fax and Scan.For most of our employees, this works fine.But, suddenly for some it does not work. When I visit the ones who can't fax, I open Windows Fax and Scan and try to launch it. It does not launch. On some of the computers, the user gets a message that the format must be tif. For others, they get a message saying that they can not access to the document folder.I'd like to remove Windows Fax and Scan on these computers and try to reinstall it and see what happens. How can I do that?
View 4 Replies
View Related
Dec 8, 2011
I have just recently built a new computer and am trying to use my older vga monitor with it. The monitor displayed fine while installing the os but after it finished the monitor goes right into sleep mode. I updated all my drivers for the onboard video and my video card and have switched between the two in my bios trying to make it work. So far the monitor displays up to the loading windows screen then goes straight into sleep mode. The most annoying thing is that the monitor works fine as a secondary monitor, just not a primary.
View 3 Replies
View Related
Dec 16, 2012
So I opened up my tower to do some dusting and I accidentally dropped the tower door and the wires that power the tower door fan was ripped off. There was a red and black wire that has these weird looking prongs on them. I first did not know where they went... So I just looked at the 4 pin whole plugs and started to stick these two in these plugs to test... First few times I did this; the pc restarted and there was a spark....(could this be y my background no longer works?) Then I found two holes out of the four pinned plugs that powered my fan.. Hurray I thought cause the fan was powered, the blue light was on and I was happy for that moment. Then I realized my background was just a blank color.. So I right clicked/personalize/desktop background/ set up the photos I saved/hit save changes. and nothing. no background.
View 6 Replies
View Related
Mar 21, 2011
Windows 7 Ultimate, 32 bit. Not on a domain. After I installed SP1, "Switch User" disappeared as an option. "Hide entry points for Fast User Switching" in GP Editor is set to Not Configured.
I also checked the Application Information service as Andre suggested, and it was not running. I started it, set it to automatic startup, and rebooted. Still no joy.
I have uninstalled SP1, and I now have the option to switch users as I did before installing SP1.
I'd prefer to keep my system updated, but for this system anyway, the ability to switch users as opposed to logging off is more important.
View 2 Replies
View Related
Jul 7, 2012
I guess I'm just having a series of minor problems.The function of the right click on my mouse no longer works. I get a rotating circle that eventually states the Windows can not solve the problem.
View 2 Replies
View Related
Sep 21, 2012
We have a script that installs an application on a user's box. It can run on XP, Vista, Win 7.... So it uses the ver command and find to figure out what the os is. It used to run on my win 7 box. It no longer does. The find command now gets an error. I tried substituting findstr and it returns a good completion code regardless! The grep command works great but most machines don't have grep so that is not an option to use. I would just like to figure out why find doesn't work. The date for find.exe in the System32 folder says 7/13/2009. Is there something I can do to restore find? Listed below is the the command & output that helps determine the OS version using find/findstr/grep
View 1 Replies
View Related
Apr 23, 2012
I have a Sceptre X20WG Naga 20.1" monitor on a DVI connection with my EVGA GTX460 card. I was using it yesterday while studying for finals and decided to hook up my 37" Westinghouse TV via VGA connection, using a VGA-to-DVI converter to plug into the graphics card, as the card only has dual-DVI and mini-HDMI outputs. It was working grand as a second screen, no issue at all. Now, today, I turned on my computer and my Sceptre Monitor wasn't outputting any images at all, it just said no signal detected and then went to sleep, though my computer was still on.
So I turned on the TV out of curiosity and found that the TV was now the main screen, still with the VGA connection, and I hadn't unplugged anything since yesterday. So I logged in and right-clicked on the desktop, went to screen resolution, and here it says that the TV is the only screen detected, even after hitting detect. So I unplugged the VGA from to TV and plugged it into the Sceptre Monitor. Turned on the computer and the monitor worked like a charm on the VGA cable. I also plugged the DVI cable that I was using for the monitor into the TV and that worked like a champ too.
The only reason this is bugging me is because I won't always be using the TV as a main display because it's kinda of a pain to sit close to a screen that big. So I am currently on this forum while my monitor is using the VGA connection. It also seems to vary from which DVI port I use on the videocard because if I plug the VGA cable with converter into the 2nd port, there is no video output, but if it's in the first port, works great. I'm going to try just the DVI cable to the TV on each card port to see what the deal is there.
So basically:
The cable isn't the problem.
The VGA needs to be in the 1st DVI port on the card to work.
The DVI doesn't work at all when hooked up to the monitor.
What I want is to be able to use DVI on the monitor and VGA on the TV.
Specs:
Intel Core 2 Quad Kentsfield Q6600 2.4GHz @3.0GHz
8Gb Kingston ValuRam DDR3-1333
Asus P5G41T-M LX Mobo
EVGA GTX460(2x Dual link DVI and 1x mini HDMI)
Windows 7 Professional x64
View 3 Replies
View Related
Jun 10, 2011
I installed Windows 7 Ultimate x64 and now my built in webcam no longer works. I have a Toshiba Satellite L510-016. I am unsure of the webcam model itself as no information seems to pop up for it anywhere on my computer. I have tried installing drivers with no success.
View 9 Replies
View Related
Jun 14, 2010
Just did a clean install of Windows 7 Pro on an HP dc7700, got the drivers fixed then did and update of windows. After doing the updates, Internet Explorer 8 no longer works. Can still connect to our server, but no outside connectivity.
View 7 Replies
View Related
Nov 11, 2011
i noticed that my PC had been using a lot of the SSD for information i felt should be saved on the HD. i read some forms and someone said that the C:USERS folder can simply be dragged to the HD so that everything is saved there. so i copied it onto my other HD and renamed it USERS2. unfortunately i noticed that this didnt and doesnt work and for some reason the USERS folder on my SSD has gotten renamed to USERS2 as well and the Catalyst Control Center application no longer works... i dont know how to fix it and im afraid that i might dig myself further into this mess.
View 7 Replies
View Related
Jan 20, 2012
I have a wireless logitech headphone. The speakers work ok for the most part, but, the mic does not always work unless I manually configure it for the headphone. And after I get done talking it very often reverts back to the builtin mic. a blog but they saw it on dv9000 (I think). There was a solution given for that driver but not for my dv2700.
View 1 Replies
View Related
May 9, 2011
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies
View Related
Jul 2, 2012
When I plug in or unplug my external display to my laptop, my display options no longer automatically reconfigure as they used to do. Now if I unplug the monitor, Windows acts as if it's still there, and windows that were on the monitor stay offscreen (as does the cursor, if that's where it was). I can manually move the cursor back, right-click load graphics properties and make changes OR do an F-key combo to move everything back on the laptop screen OR program a hotkey but these are all pretty annoying for one reason or another. Unfortunately this must have started happening sometime in the last two weeks--at the same time as I made a load of major computer changes.
However this did NOT include a graphics driver change (my graphics driver is current). At this point I feel it could be anything, but I'm wondering if it could be a recent BIOS update I did that HP recommended. By way of troubleshooting I did run Windows in safe mode with ONLY the "ATI Catalyst" and "AMD External Events utility" running on top of the basic services, in case a newly installed service was stealing hotplugging messages, but that didn't do anything. I've also gone exhaustively through my graphics driver settings to make sure everything there looks correct.
View 3 Replies
View Related
Dec 18, 2012
a few days ago on boot up my laptop restarted and then attempted windows repair. came back to life. tonight while viewing Internet my screen went black. i had to hold the power button down to restart. i chose start windows normally. when attempting to load windows i got a blue screen saying "attemp to restart display driver has timed out". after a few attempts i have managed to get it into safe mode and deleted the nvidia graphics driver. restarted and all was fine (low resolution). i installed the graphix driver again an it happened again. is my graphics card broke?
alienware m7700 d900k
amd athlon 64 x2 4600+
geforce 6800 ultra
windows 7 64
2gig ram
the nvidia driver does not detect my graphix card so i have to add it in the setup information file. but i have had no problems for about nine month since i bought this laptop second hand.
i joined this site for another problem a few days ago. slow speeds and constant hdd access but had a good clean out and was going to see how it went. then this happened. i do not think they are related.
View 5 Replies
View Related
Mar 16, 2012
Today at college I tried to continue my work by plugging in my USB hard drive and it simply wouldn't appear in "My Computer".When I tried later on that day it would appear as a "Removable Disk" but I was unable to double click it.The technicians at my college said that I need to format it, but when I tried to create a backup last week it was unsuccessful so it would mean losing all of my college work.
View 1 Replies
View Related
Aug 3, 2011
I was messing around with the permissions and sharing properties of an external hard drive last night. not sure what I did but I cannot play video files from that hard drive anymore. I get this error message in vlc media player.
View 2 Replies
View Related
