I am trying to install Windows 7 on a new computer and i keep getting this error message. "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk. ensure that the disk's controller is enabled in the computer's BIOS menu."I am also trying to run RAID 5 on this system, i have x4 1.5T HD.
View 2 Repliesso i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedAfter I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
View 1 Replies View RelatedWindows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
View 2 Replies View RelatedI have recently downloaded Windows xp .But I am having problem with sound.The disk is unsupported.
View 2 Replies View RelatedIts a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
Yesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.
I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.
my windows 7 program will not boot up its ask to put in repair disk is there any other way to fix it myself? how much will it cost
View 3 Replies View RelatedI tried everything. Windows 7 will not boot from recovery disk.
View 1 Replies View Related[code] When I boot from it after the "Starting Windows" Screen I get BSOD and it says "PAGE_FAULT_IN_NONPAGED_AREA".This is what I thought was important from the BSOD all the middle text says is disable BIOS memory options such as caching or shadowing, and I have no idea how to do that and no idea if that would even fix this. Can this be caused from a faulty hard drive or is this a problem with the install disk itself.
View 21 Replies View RelatedI've recently built my new gaming pc. When I try to boot the windows 7 disk, it says, " reboot and select proper boot device or insert boot media in selected boot device and press a key" I've gone into the BIOS to make it boot from the disk drive, but to no avail. I'd love some help on this. I'm also quite the PC noob, this being my first build.
View 7 Replies View RelatedIn Windows 7 RTM I have had trouble with one of my two HDs, a Seagate 300 GB. During Windows 7 installation, installer "could not find drivers" when the Seagate was the first SATA drive. Once the Western Digital drive was set as the first drive, system installed ok.
After installation, the Seagate shows in the Disk Management as 300 GB, but if look at contents with Explorer, it has only 125 GB capacity. Can this be a Seagate firmware problem? (Windows 7 RC earlier had no problems with this drive when the system had Win7RC + Vista + XP.)
I'm doing an upgrade from 32 bit XP to 32 bit Windows 7 on a Dell Dimension 8300 desktop. I've run the upgrade advisor. The desktop has 2 hard drives and a RAID controller configured in Stripe(RAID 0). I bought the Windows 7 Home Premium family pack (3 installs) and did the XP to Windows 7upgrade on two laptops; so I think the disk is okay. When I start the upgrade for a clean install on the desktop I get a "f1 to retry boot f2 for setup" message from the BIOS indicating that it does not seem to recognize the Windows 7 install disk in the CD. I've check the CD reader and it seems to read the files without a problem. I can start the Windows 7 install within XP but that does not work for the clean install, I need to start from the boot. There is a second DVD ROM drive on the system but that does not work either.
View 2 Replies View RelatedIve squeezed all my brain juices out to no avail. [code] Ive been trying to set up software mirrored raid on my two HDs.I setup Win 7 as a clean install and then convert disk 0 to a dynamic disk. After that when i restart my comp, it just wont boot. Im left with the DMI pool data thing and a blinking cursor.
View 9 Replies View Relatedsomehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.but system is not booting...not opening..so i cannot go to disk management.hrad disk is showing some partitions with system reserved.except system reserved all the partitions are showing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.reinstalltion through OS DVD is possible by booting through OS DVD. but in advanced option repartition option is not coming.the one partition in which i installed OS previously, only in that formatting option is coming.in other partition neither formating option is coming nor extend.
View 5 Replies View RelatedSomehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7..
View 3 Replies View Relatedsomehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.
from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
Randomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit
AMD Phenom II X4 965
Galaxy GeForce GTX 460
16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
I have a server (HP Proliant ML350 G5) that has a hard disk with Windows 7 Enterprise and Ubuntu (I'll talk about that on UbuntuForums, though). I recently acquired a Dell Dimension 9150. I moved the hard disk from the server to the Dell. Now Windows won't boot. It gets as far as the OS selection. I select Windows 7 from the OS choices. I don't even get the Starting Windows screen. If I try Safe Mode, I get the driver loading screen, but nothing more than that. When I try Startup Repair, it hangs at "Loading Windows Files".I cannot re-install windows because of programs and admin tools found on that hard disk.
View 6 Replies View RelatedSo I am getting this error (Windows cannot be installed on this disk. The disk may fail soon) when I am trying to re-install Windows on my pc.I have tried running UbuntU to check for errors on my HD but it seems to just freeze up everytime I try to run it. And i tried to run the WD Diag504.iso for my WD20EARS HD but its telling my I need and earlier version or some crap, but I know that I have the correct version.
View 8 Replies View RelatedJust got a Corsair Force 3 120GB SSD and want to do a clean install of Windows 7 64bit on to it.However, when I get to the 'Where do you want to install windows?' screen, I get the error message:'Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu.
View 14 Replies View Relatedwindows cannot be installed to disk,this computer's hardware may not support booting to disk,ensure that the disk controller is enabled in the computer bios menu.windows cannot be installed in this disk, the disk may fail soon, if the other hard disk are available,install windows to another location.
View 4 Replies View RelatedI have Dell Inspiron N5110 i7 and with 8Gb RAM and I have replace DVD drive with SSD disk in caddy, and that this is working fine ( when formatting I can copy files), also I have selected AHCI for SATA controller in BIOS. After that my plan is to put Win7 on SSD disk. So I have make one USB flash with win7 installation from iso file.
Then during installation when I got to point to select SSD disk as disk where OS will be installed I recieve message :
Quote : Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu
I'm trying to install windows on my brand new SSD drive. It failed a couple times and now it says, "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." What does that mean? Is the SSD drive junk?
View 3 Replies View RelatedI have a new 2TB WD SATA drive for my Dell Inspiron 545 to replace a failed 1TB drive. When I get to the part of the install where it asks "Where do you want to install Windows?" there is a message "Windows cannot be installed to this disk."I clicked "Show Details" and it says "'Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu." I read many threads here and on other sites. The drive is visible in the BIOS and set to IDE, not RAID. The processor is Intel Core 2 Quad Q8200 2.33 GHz. The drive is connected to the same cables as the previous drive. [code]
View 8 Replies View RelatedIve been running Vista for a couple of years, until last night when the system decided to pack up and lose/corrupt half the sys32 folder. I'm using RAID-0 for my hard disks, so i ran the RAID setup, deleted the array and created a new one, striped, just like the previous, and then tried to run a Windows 7 setup i'd picked up from the office. Only problem is, even though i've been through the BIOS and told it to boot from disk as first priority, all i get is a screen that says "Windows is loading files", followed by a few seonds of "Starting Windows" before i get an error screen informing me that CI.dll is missing or corrupt (0xc0000098). My only two options from here are to run Windows Memory Diagnostic or try and boot again from the Windows Setup dvd, which i've tried in safe mode and every other available advanced boot option.
Edit: I just tried to run an XP setup disk i have lying around to see if i had the same problem, and i got an error saying that no hard drive was detected on my system. I checked the BIOS and under 'Standard CMOS Features' the SATA channels are all listed as empty, with only my IDE cd/dvd drive being recognised.
i need to find the software for my disk drive... nothing will download from the disdrive
View 2 Replies View RelatedI know there are tons of threads on this but as of yet none of them have helped.Trying to do a clean install on a Sony VAIO laptop PCG-71312l (or something close to that)Where do you want to install windows?I have Disk 0 Partition 1 with a total size of 298.1 and free space of 298.0 GB Type is primaryError message below says "Windows cannot be installed to Disk 0 Partition 1. (show details)"The details are:"Windows cannot be installed to this disk. The computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS"Well that's the fun part of the SONY VAIO - you can't do squat in the BIOS except change the date/time and boot order but I read that the VAIO will detect and setup everything automatically.So I Can't do any ACHI/IDE changes.
So if I just click on next I just get an error message of"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."I have deleted, formatted, created new partitions and restarted the computer 10 times. Nothing is getting me anywhereOh and I had to create a bootable USB from the windows ISO to USB/DVD program.I have gotten this to work just fine before with the same hard drive which was working just fine an hour ago.
I have a sony PCVRS220. i replaced the original HD with a 1tb WD caviar black. i am installing Windows 7 and i am up to the "where do you want to install Windows 7" screen. but i get a message "Windows cannot be installed to disk 0 partition 1."
I am using a sata to pata adapter
Manufacturer ASUSTeK Computer INC.
Model KIRIN-V
Version REV 1.xx
BIOS Vendor Award Software, Inc.
Serial Number 28000230-3016793
BIOS Version ACPI BIOS Revision 1001
Firmware Version 97.114
BIOS Date 01/08/2003
windows cannot be installed to disk 0 partition3. (show details)install windows:windows cannot be installed to this disk. the disk may fail soon. if other hard disks are available, instal windows to another locatio.i tried to install it on other partitions but there is the same problem as on the partition 3 what should i do ?
View 1 Replies View RelatedI am trying to load Windows 7 Pro the are 2 Partitions when i select any of the 2 i get the same massage that Windows cannot be installed to Disk 0 Partition 1 or 3 depending which i choose i then downloaded Drivers (SATA AHCI Driver) Into my USB the i got a massage No device drivers where found. then tried to format it goes up to 20% then fails.
it seems like i can't Excess my hard drive and the Total Size is the same as the Free Space Which means the is no operating system available