Windows 7 Not Booting After Moving Hard Disk From Server To Desktop?
Apr 22, 2012
I have a server (HP Proliant ML350 G5) that has a hard disk with Windows 7 Enterprise and Ubuntu (I'll talk about that on UbuntuForums, though). I recently acquired a Dell Dimension 9150. I moved the hard disk from the server to the Dell. Now Windows won't boot. It gets as far as the OS selection. I select Windows 7 from the OS choices. I don't even get the Starting Windows screen. If I try Safe Mode, I get the driver loading screen, but nothing more than that. When I try Startup Repair, it hangs at "Loading Windows Files".I cannot re-install windows because of programs and admin tools found on that hard disk.
I had Dell XPS 8300 Desktop & had bought & Installed Windows-7 ( Ultimate ) on it's 500 GB HDD.I gave that system to my relative except Hard Drive.Now I bought Dell T-7500 Workstation with only DOS installed on it's hard drive to save some money & because I already have Windows-7 ( Ultimate ) DVD.I took out the hard drive with DOS from the workstation & replaced it with the hard drive that I had in XPS with Win-7 already installed.I then tried to boot it in the workstation but it wouldn't boot & gave error messages.So I formatted the OS Partition & fresh installed Windows-7. Now it does load Windows -7 but first it goes thru some other commands as follows when I start the system.
Dell SAS 6 Host Bus Adapter BIOS MPTBIOS 6.22.03.00 ( 2008.08.06 ) Initializing..... Press Ctrl - C to run SAS Configuration Utility Searching for Devices at HBA 0..... Dell MPT Boot ROM Successfully installed
Then it loads Windows-7.All of above happens on its own, I didnt touch anything.So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems.Also I haven't installed any drivers yet but Sound, Video & Internet does work.Do I need to install any drivers & if yes, which ones ?Here is the configuration of Dell workstation T-7500 :
Intel(R) Xeon(R) E5645 2.40GHz, 12M cache, 5.86 GT/s QPI, Turbo, HT, 6C Intel(R) 5520 Chipset DOS Factory Installed (English) Integrated Intel(R) SATA 3.0Gb/s controller with support for RAID Integrated High Definition Audio
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
I am trying to boot windows server installed in external hard disk from my windows 7 pc but when I am trying to do so it my pc is flashing blue screen and my pc reboots with win 7.
I am an IT student who is forced to use a VM to run Windows 7 Professional and Server 2008 R2 Enterprise. I currently own a Macbook Pro and am not able to afford another windows based pc for school. I was told by a teacher to Dual Boot both of these under the same partition. Ive tried to understand all of this and ask ?'s but I'm getting really lost.
Right now I've got a dual boot with xp and windows 7 on an IDE disk. I want to clone my windows 7 installation to a brand new, empty (Sata) disk. If I restart the system after the cloning, will the SATA disk have a boot record? What boot options will I have? 2 former ones and a messed up 3rd one?
I am trying to install Windows 7 on a new computer and i keep getting this error message. "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk. ensure that the disk's controller is enabled in the computer's BIOS menu."I am also trying to run RAID 5 on this system, i have x4 1.5T HD.
Recently, my ancient desktop died on me. I had some stuff stored on the main C drive (40 GB) and some on an external 1 TB drive. I put the 40 GB HD in the external module to upload it to a laptop with a 360 GB HD. I would then like to transfer that 40 GB to the 1 TB drive. When I plug in the external with the 40 GB, it appears that the Windows 7 machine does not read it or pick it up. It recognizes it as an external device, but not as a drive.
I currently have a hard drive with two partitions dual booting Win 7 and Vista. I need to move both OS's to a new hard drive. I've made a full backup of the drive with the Macrium Reflect program, but I don't know if restoring it on a new hard drive using the recovery CD will work. Will there be any problems booting the operating systems afterwards? Is there a better way or better program to do this? Does the type or brand of the new hard drive make a difference?
So I just moved my laptop hard drive To my desktop to run windows 7 but it keeps stopping at the starting windows and running system boot repair but it can't fix it or somthing. Im probably guessing it's the drivers causing the problem cause it's Moved to my desktop but any way to get around it?
my Acer aspire 4750G uses windows 7 64 bitit boots and get stuck in the log in screen.. I have no password but I have two users, so I have to click on which to log into.the cursor is moving , but when I click on the User, nothing happens.. the cursor is still moving, but there is no indication that the computer is reading.that round moving icon that you see is not there..is there a way to fix this without reformatting? I dont know much about computer troubleshooting and repair
What to do with my Imac 27" that goes suddenly black when using windows 7 enterprise, but computer still seems to be working, I can hear audio and the hard drive is still moving. Is it hardware or software problem? Sometimes it happens frequently, others does not happen at all.
I am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?
Yesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.
I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.
[code] When I boot from it after the "Starting Windows" Screen I get BSOD and it says "PAGE_FAULT_IN_NONPAGED_AREA".This is what I thought was important from the BSOD all the middle text says is disable BIOS memory options such as caching or shadowing, and I have no idea how to do that and no idea if that would even fix this. Can this be caused from a faulty hard drive or is this a problem with the install disk itself.
I've recently built my new gaming pc. When I try to boot the windows 7 disk, it says, " reboot and select proper boot device or insert boot media in selected boot device and press a key" I've gone into the BIOS to make it boot from the disk drive, but to no avail. I'd love some help on this. I'm also quite the PC noob, this being my first build.
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//
i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.
my system is
Intel Core i5-2300 cpu@2.8ghz 2.79ghz,3.48 GB of RAM and windows is 32 bit/
I'm doing an upgrade from 32 bit XP to 32 bit Windows 7 on a Dell Dimension 8300 desktop. I've run the upgrade advisor. The desktop has 2 hard drives and a RAID controller configured in Stripe(RAID 0). I bought the Windows 7 Home Premium family pack (3 installs) and did the XP to Windows 7upgrade on two laptops; so I think the disk is okay. When I start the upgrade for a clean install on the desktop I get a "f1 to retry boot f2 for setup" message from the BIOS indicating that it does not seem to recognize the Windows 7 install disk in the CD. I've check the CD reader and it seems to read the files without a problem. I can start the Windows 7 install within XP but that does not work for the clean install, I need to start from the boot. There is a second DVD ROM drive on the system but that does not work either.
Ive squeezed all my brain juices out to no avail. [code] Ive been trying to set up software mirrored raid on my two HDs.I setup Win 7 as a clean install and then convert disk 0 to a dynamic disk. After that when i restart my comp, it just wont boot. Im left with the DMI pool data thing and a blinking cursor.
Every so often i find that my desktop icons have moved from where i positioned them. The right click menu for auto arrange icons and align to grid are both unticked. My wife uses PC as well but she doesnt move them!I dont understand how Windows 7 might be moving them! i have AVG free, Spyware doctor and WIN 7 firewall all operating and never usually have any probs but theres a worry in the back of my mind that it could be an infection that is causing this as a "joke" virus.?
I have a desktop computer. It has a phenom x6 1045t, 4 gigs of ram, an hd 6870, and a 530 watt psu, running windows 7. A month ago, it was running perfectly here in my dorm room. I went on winter break and drove it home with me. It was running perfectly there, too. I have just come back to school from winter break and I cannot get it to start properly. Literally NOTHING has changed with the hardware since about 4 months ago, when I first upgraded my video card to the 6870. It is plugged into the same surge protector in the same outlet it was a month ago, when it was last here. Here's what happens when I try to start it: It goes through the initial ASUS booting screen, then onto the starting windows screen. Then, out of nowhere, my monitor says it's "going to sleep," the lights on my keyboard flash, and it restarts the booting cycle. However, if I tell it to boot into safe mode, it starts without any issues. I need some help identifying the problem here. My first thought was a power issue, but again, it worked fine a few days ago, and it was working fine in these outlets before. I was very gentle in the move, so i doubt the PSU was damaged. The fans are all spinning and the LEDs still come on. Hard drive must be fine, otherwise it wouldn't work in safe mode. Ran a memory test, RAM is fine too.
Additional info: Actually, it successfully started yesterday too, in my dorm room. I used it for about half an hour then let it hibernate, and only now am I having issues. Also, the fan on my video card was going crazy, but after I re-seated it, it calmed down. I rechecked all the wiring as well and everything seems fine.
My system disk is about 80% filled up and I am looking to move the system files to a new disk for increased efficiency. I believe the way to go is diskcopy, creating a clone of current system disk to a new disk.smI am looking at EaseUS Disk Copy Home Edition 2.3.1 and MiniTool Drive Copy both freeware.
Acer desktop PC will not boot running on windows 7. This happenned about 2 days after I installed an antivirus program called Avast. However the computer already had installed the microsoft security essentials, the same problem happenned with my computer so I logged in safe mode and uninstalled the antivirus Avast. However when I try to get into safe mode in this desktop computer, the system gets frozen and the last line it shows its the disk.sys driver being loaded. Anything I can do?
Ok I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption password.
