Why Is Windows 7 Only Booting When Have The Installation Disk In
Dec 2, 2011
Yesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.
I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.
View 5 Replies
ADVERTISEMENT
Dec 27, 2012
My netbook (ASUS UX32) boots up and when I reach the step to install Windows 7 I get a message "cd/dvd drive not found, please select a drive" I have got no idea....i tried the option "browse" ..still nothing, its just
View 2 Replies
View Related
Oct 22, 2012
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
View 5 Replies
View Related
Apr 14, 2011
I am trying to install Windows 7 on a new computer and i keep getting this error message. "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk. ensure that the disk's controller is enabled in the computer's BIOS menu."I am also trying to run RAID 5 on this system, i have x4 1.5T HD.
View 2 Replies
View Related
Sep 14, 2012
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.
Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.
This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.
So I tried to manually set up the bootable flash drive, which also didn't work.
After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. [URL] I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.
Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS) Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.
Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3063 Mb
Graphics Card: NVIDIA GeForce GTX 560, 1023 Mb
Hard Drives: C: Total - 476837 MB, Free - 132797 MB; E: Total - 234627 MB, Free - 205990 MB; F: Total - 234316 MB, Free - 233246 MB;
Motherboard: ASUSTeK Computer INC., P7P55D PRO
Antivirus: AVG Anti-Virus Free, Updated and Enabled
View 12 Replies
View Related
Sep 14, 2012
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever. Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB. This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.So I tried to manually set up the bootable flash drive, which also didn't work. After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive. Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn. Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
View 1 Replies
View Related
Aug 6, 2012
I have windows 7 ultimate. While I was installing it was booting and showing a background with courser but not showing installation window ...
View 1 Replies
View Related
Feb 28, 2012
my computer has Windows XP 32-bit, and i'm trying to do a clean install to Windows 7 64-bit. this is my processor. i'm assuming it can take the 64-bit version. i boot from the disc, press any key, and all the files load and whatnot. i see a screen that says "starting windows", and the logo appears. i figure that's a good sign. but...after that, i get stuck on a screen with nothing but some "desktop wallpaper" and my mouse. it just sits there. i can move my mouse around, but no installation options pop up. i bought the upgrade version of Windows 7, and i'm under the impression that you should be able to do a clean install using those discs. i stuck the 32-bit disc in my drive, and the install menu showed up no problem. but i want to install the 64-bit version.
View 9 Replies
View Related
Jul 4, 2010
I've got a problem with my Windows 7 installation in that - it wont boot! Either in normal or safe mode!
I've tracked the problem down to a driver - CTMMount.sys which was installed by a recent installation of Comodo Time Machine - which has since been uninstalled but doesnt look like the uninstallation has worked correctly.
Therefore I could do with editing the registry/startup procedure so that this file doesnt attempt to load and then I can get back into Windows 7
View 9 Replies
View Related
Apr 4, 2012
I have been given the challenge to make a way to install Windows without any installation media and without having to even touch the computer while it's installing. So far I've made a .wim image with the help of this guide and I've made an Autounattend.xml file with thI put the install.wim image in the sources directory on a flash drive and the Autounattend.xml file in the root of the flash drive, and it does exactly what I want it to - all except it's not on a partition. So I move it to a partition and add a boot entry using EasyBCD. It boots fine, but it acts like the Autounattend.xml file isn't even there. So right now I have the choice of hands free installation with media, or manual installation without media. My main question is why the Autounattend.xml file isn't working when I boot the same media from a partition
View 6 Replies
View Related
Oct 14, 2012
I've got an Asus P8Z77V Motherboard with an Intel I3 - 2120 processor and 6GB Corsair DDR3 Ram.After I installed the drivers i got on the mobo installation CD, Windows (32 bit Ultimate) just refused to boot. I then went into safe mode uninstalled the graphic drivers and Windows then started up. I am looking to install the graphic drivers as my videos are lagging.
View 4 Replies
View Related
Aug 25, 2012
i am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
View 3 Replies
View Related
Jul 24, 2012
my windows 7 program will not boot up its ask to put in repair disk is there any other way to fix it myself? how much will it cost
View 3 Replies
View Related
Jul 12, 2012
I tried everything. Windows 7 will not boot from recovery disk.
View 1 Replies
View Related
Sep 14, 2012
[code] When I boot from it after the "Starting Windows" Screen I get BSOD and it says "PAGE_FAULT_IN_NONPAGED_AREA".This is what I thought was important from the BSOD all the middle text says is disable BIOS memory options such as caching or shadowing, and I have no idea how to do that and no idea if that would even fix this. Can this be caused from a faulty hard drive or is this a problem with the install disk itself.
View 21 Replies
View Related
Nov 30, 2012
I've recently built my new gaming pc. When I try to boot the windows 7 disk, it says, " reboot and select proper boot device or insert boot media in selected boot device and press a key" I've gone into the BIOS to make it boot from the disk drive, but to no avail. I'd love some help on this. I'm also quite the PC noob, this being my first build.
View 7 Replies
View Related
May 30, 2011
I'm doing an upgrade from 32 bit XP to 32 bit Windows 7 on a Dell Dimension 8300 desktop. I've run the upgrade advisor. The desktop has 2 hard drives and a RAID controller configured in Stripe(RAID 0). I bought the Windows 7 Home Premium family pack (3 installs) and did the XP to Windows 7upgrade on two laptops; so I think the disk is okay. When I start the upgrade for a clean install on the desktop I get a "f1 to retry boot f2 for setup" message from the BIOS indicating that it does not seem to recognize the Windows 7 install disk in the CD. I've check the CD reader and it seems to read the files without a problem. I can start the Windows 7 install within XP but that does not work for the clean install, I need to start from the boot. There is a second DVD ROM drive on the system but that does not work either.
View 2 Replies
View Related
May 2, 2010
Ive squeezed all my brain juices out to no avail. [code] Ive been trying to set up software mirrored raid on my two HDs.I setup Win 7 as a clean install and then convert disk 0 to a dynamic disk. After that when i restart my comp, it just wont boot. Im left with the DMI pool data thing and a blinking cursor.
View 9 Replies
View Related
Apr 2, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.but system is not booting...not opening..so i cannot go to disk management.hrad disk is showing some partitions with system reserved.except system reserved all the partitions are showing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.reinstalltion through OS DVD is possible by booting through OS DVD. but in advanced option repartition option is not coming.the one partition in which i installed OS previously, only in that formatting option is coming.in other partition neither formating option is coming nor extend.
View 5 Replies
View Related
Apr 2, 2012
Somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7..
View 3 Replies
View Related
Apr 3, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.
from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
View 3 Replies
View Related
Aug 27, 2012
Randomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit
AMD Phenom II X4 965
Galaxy GeForce GTX 460
16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
View 7 Replies
View Related
Jun 11, 2011
lled Win 7 x64 on my PC which was running Win XP SP3 x64 without any problems.I formatted my drive and did a clean install. After install my sytem wont boot and it says File: ntoskrnl.exeStatus: 0xc0000428Info: Windoes cannot verify the digital signature for this file.My BIOS is the latest for my Gigabyte G31M-ES2C and I formatted the complete hard drive before install using GParted. I have cleared my CMOS memory and I tried reinstalling and repairing the system too. I checked my TwinMos 2GB RAM for errors and it is fine too. I have two hard drives both SATA WDC caviar blue 250gb (master) and 160gb(slave).
View 9 Replies
View Related
Apr 22, 2012
I have a server (HP Proliant ML350 G5) that has a hard disk with Windows 7 Enterprise and Ubuntu (I'll talk about that on UbuntuForums, though). I recently acquired a Dell Dimension 9150. I moved the hard disk from the server to the Dell. Now Windows won't boot. It gets as far as the OS selection. I select Windows 7 from the OS choices. I don't even get the Starting Windows screen. If I try Safe Mode, I get the driver loading screen, but nothing more than that. When I try Startup Repair, it hangs at "Loading Windows Files".I cannot re-install windows because of programs and admin tools found on that hard disk.
View 6 Replies
View Related
May 16, 2010
Ive been running Vista for a couple of years, until last night when the system decided to pack up and lose/corrupt half the sys32 folder. I'm using RAID-0 for my hard disks, so i ran the RAID setup, deleted the array and created a new one, striped, just like the previous, and then tried to run a Windows 7 setup i'd picked up from the office. Only problem is, even though i've been through the BIOS and told it to boot from disk as first priority, all i get is a screen that says "Windows is loading files", followed by a few seonds of "Starting Windows" before i get an error screen informing me that CI.dll is missing or corrupt (0xc0000098). My only two options from here are to run Windows Memory Diagnostic or try and boot again from the Windows Setup dvd, which i've tried in safe mode and every other available advanced boot option.
Edit: I just tried to run an XP setup disk i have lying around to see if i had the same problem, and i got an error saying that no hard drive was detected on my system. I checked the BIOS and under 'Standard CMOS Features' the SATA channels are all listed as empty, with only my IDE cd/dvd drive being recognised.
View 3 Replies
View Related
Jan 26, 2011
I'm in a bit of a pickle here. My CD drive won't allow me to boot from CDs anymore, for whatever reason. I have 2 partitions on my hard drive and I'm wondering if it's possible to format the main partition by copying the windows setup files to my secondary and then somehow running them from there, whilst wiping the main one. I really don't want to reinstall without formatting, but right now I have no other option.
View 1 Replies
View Related
Dec 25, 2009
Recently, I was messing around with my HDD's partitions in GParted. I resized my Windows 7 partition and made a new NTFS for Windows XP, and a new ext2 for Puppy Linux. I installed the GRUB Bootloader and all my partitions booted fine off of it except for Windows 7. I later found out this has something to do with the Master Boot Record and that I should install GRUB and then install Windows 7.
I was okay with this for a while, but Windows XP couldnt boot many applications from the Windows 7 partition because I have it's x64. I eventually realized that I hadn't made my Windows XP partition large enough (only 3 gig) for anything I wanted to do with it. After a few days, I just deleted the Windows XP and Puppy Linux partitions and was back to having just my Windows 7 partition. I was hoping everything would be magically better, but when I restarted my computer, the BIOS told me a "disk read error" had occurred and "press any key to restart".
I put in a Puppy Linux Live CD and opened up GParted again. GParted showed me that my HDD was now just one big block of Unallocated space. Then I looked in the lower-left corner of the screen and saw that I still had 4 partitions (sda1, sda2, sda3, sda4). sda1 is now my Windows 7 partition, sda2 is now my Windows XP partition, and for some reason sda3 and sda4 are both HP Recovery partitions.
I tried everything I could think of to save myself. I popped in the Windows 7 Upgrade Disk (I had been running Vista before) and tried the Recovery tools included with it, but the Recovery didn't recognize any partitions on my HDD at all. I ran a Command Prompt and tried all the options in bootrec fixmbr, but two of them didnt work and the other two replied "Element not found". Then I tried sfc /scannow, but that told me I had to be running Windows. I booted back into Puppy, ran GParted, and tried to make a new partition, but GParted told me that doing so would erase ALL data on the HDD. There's probably some more options I tried, but I can't remember them right now.
Can anyone help me out? I feel like I'm close to just backing up my personal files, wiping the HDD, and starting over. Only problem is I don't have anywhere to backup 150 gigs.
View 7 Replies
View Related
Oct 13, 2012
I burned the windows 7 ISO file to my USB pen drive....I AlSo set the Usb device to boot in but whenever i try to reboot it a message is displayed"disk error...press any key to restart" But pressing any key does not effect and the same message displays again and again.
View 5 Replies
View Related
May 6, 2012
Firstly I should say that I am primarily a mac user, and it is not my laptop I am posting about. Although I am reasonably knowledgable about Windows, I haven't used it since XP, about four years ago, and so am pretty rusty.Basically, my girlfriends computer randomly turned off about a week ago, she assumed it was a dead battery, plugged it in, and then when it turned back on it wouldn't boot displaying error message: missing operating system.As it is a Dell laptop it didn't come with any installation discs, and I totally forgot to even make a repair disc when we got the laptop. I managed to get hold of a Windows 7 Installation Disc and license key for Windows 7 Ultimate 64 bit through my university. I think the laptop was previously running Windows 7 Home Premium, but that's all I know, and I'm not entirely sure of that fact.
Anyway, burnt the .iso to disc and have tried to boot several times from DVD Drive. The laptop loads the files from the DVD fine, and gets as far as the "Starting Windows" screen, where it seems to get stuck for a few minutes, until it becomes a black screen with just a cursor (the cursor still moves). This also happens with an 64 bit repair DVD I also managed to get hold of.
View 9 Replies
View Related
Sep 16, 2011
I had purchased dell XPS15 with Windows 7 professional, where dell is no more providing os installation media i made a recovery disk.
First i want partition C: drive without formatting it. and then How can i install dual booting os with this recovery disk?
View 7 Replies
View Related
Apr 16, 2012
I am trying to boot windows server installed in external hard disk from my windows 7 pc but when I am trying to do so it my pc is flashing blue screen and my pc reboots with win 7.
View 3 Replies
View Related
