Windows 7 Not Booting After Graphics Driver Installation?
Oct 14, 2012
I've got an Asus P8Z77V Motherboard with an Intel I3 - 2120 processor and 6GB Corsair DDR3 Ram.After I installed the drivers i got on the mobo installation CD, Windows (32 bit Ultimate) just refused to boot. I then went into safe mode uninstalled the graphic drivers and Windows then started up. I am looking to install the graphic drivers as my videos are lagging.
View 4 Replies
ADVERTISEMENT
Dec 27, 2012
My netbook (ASUS UX32) boots up and when I reach the step to install Windows 7 I get a message "cd/dvd drive not found, please select a drive" I have got no idea....i tried the option "browse" ..still nothing, its just
View 2 Replies
View Related
Dec 2, 2011
Yesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.
I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.
View 5 Replies
View Related
Sep 14, 2012
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.
Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.
This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.
So I tried to manually set up the bootable flash drive, which also didn't work.
After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. [URL] I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.
Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS) Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.
Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3063 Mb
Graphics Card: NVIDIA GeForce GTX 560, 1023 Mb
Hard Drives: C: Total - 476837 MB, Free - 132797 MB; E: Total - 234627 MB, Free - 205990 MB; F: Total - 234316 MB, Free - 233246 MB;
Motherboard: ASUSTeK Computer INC., P7P55D PRO
Antivirus: AVG Anti-Virus Free, Updated and Enabled
View 12 Replies
View Related
Sep 14, 2012
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever. Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB. This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.So I tried to manually set up the bootable flash drive, which also didn't work. After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive. Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn. Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
View 1 Replies
View Related
Aug 6, 2012
I have windows 7 ultimate. While I was installing it was booting and showing a background with courser but not showing installation window ...
View 1 Replies
View Related
Feb 28, 2012
my computer has Windows XP 32-bit, and i'm trying to do a clean install to Windows 7 64-bit. this is my processor. i'm assuming it can take the 64-bit version. i boot from the disc, press any key, and all the files load and whatnot. i see a screen that says "starting windows", and the logo appears. i figure that's a good sign. but...after that, i get stuck on a screen with nothing but some "desktop wallpaper" and my mouse. it just sits there. i can move my mouse around, but no installation options pop up. i bought the upgrade version of Windows 7, and i'm under the impression that you should be able to do a clean install using those discs. i stuck the 32-bit disc in my drive, and the install menu showed up no problem. but i want to install the 64-bit version.
View 9 Replies
View Related
Jul 4, 2010
I've got a problem with my Windows 7 installation in that - it wont boot! Either in normal or safe mode!
I've tracked the problem down to a driver - CTMMount.sys which was installed by a recent installation of Comodo Time Machine - which has since been uninstalled but doesnt look like the uninstallation has worked correctly.
Therefore I could do with editing the registry/startup procedure so that this file doesnt attempt to load and then I can get back into Windows 7
View 9 Replies
View Related
Apr 4, 2012
I have been given the challenge to make a way to install Windows without any installation media and without having to even touch the computer while it's installing. So far I've made a .wim image with the help of this guide and I've made an Autounattend.xml file with thI put the install.wim image in the sources directory on a flash drive and the Autounattend.xml file in the root of the flash drive, and it does exactly what I want it to - all except it's not on a partition. So I move it to a partition and add a boot entry using EasyBCD. It boots fine, but it acts like the Autounattend.xml file isn't even there. So right now I have the choice of hands free installation with media, or manual installation without media. My main question is why the Autounattend.xml file isn't working when I boot the same media from a partition
View 6 Replies
View Related
Aug 25, 2012
i am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
View 3 Replies
View Related
Jun 11, 2011
lled Win 7 x64 on my PC which was running Win XP SP3 x64 without any problems.I formatted my drive and did a clean install. After install my sytem wont boot and it says File: ntoskrnl.exeStatus: 0xc0000428Info: Windoes cannot verify the digital signature for this file.My BIOS is the latest for my Gigabyte G31M-ES2C and I formatted the complete hard drive before install using GParted. I have cleared my CMOS memory and I tried reinstalling and repairing the system too. I checked my TwinMos 2GB RAM for errors and it is fine too. I have two hard drives both SATA WDC caviar blue 250gb (master) and 160gb(slave).
View 9 Replies
View Related
Aug 27, 2011
i just installed windows 7 and its not picking up my gtx 580 nividia card : not in device manager and i try to run the driver software and it says failed im running my computer on the motherboards graphics card its a tiny 17mb but its running things for the moment
View 9 Replies
View Related
May 6, 2012
Firstly I should say that I am primarily a mac user, and it is not my laptop I am posting about. Although I am reasonably knowledgable about Windows, I haven't used it since XP, about four years ago, and so am pretty rusty.Basically, my girlfriends computer randomly turned off about a week ago, she assumed it was a dead battery, plugged it in, and then when it turned back on it wouldn't boot displaying error message: missing operating system.As it is a Dell laptop it didn't come with any installation discs, and I totally forgot to even make a repair disc when we got the laptop. I managed to get hold of a Windows 7 Installation Disc and license key for Windows 7 Ultimate 64 bit through my university. I think the laptop was previously running Windows 7 Home Premium, but that's all I know, and I'm not entirely sure of that fact.
Anyway, burnt the .iso to disc and have tried to boot several times from DVD Drive. The laptop loads the files from the DVD fine, and gets as far as the "Starting Windows" screen, where it seems to get stuck for a few minutes, until it becomes a black screen with just a cursor (the cursor still moves). This also happens with an 64 bit repair DVD I also managed to get hold of.
View 9 Replies
View Related
Sep 22, 2012
I have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely?
View 1 Replies
View Related
Jan 2, 2013
Dell driver inspiron 1525 windows 7 graphics driver
View 1 Replies
View Related
Jul 19, 2012
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System:
ASUS P8Z68-V Pro/GEN 3
Intel 2600K
XFX R7950 Black Edition
OCZ 850W
Crucial 128 GB SSD
Seagate Barracuda 1 TB HD
Corsair H100
Windows 7 64 bit (full)
View 3 Replies
View Related
Nov 11, 2012
I wanted to uninstall zorin os- i am so stupid that i deleted the partitions in windows 7. when i restarted i was unable to boot anything- the error message came. no partitions grub rescue>. I thought i should reinstall Zorin OS to fix the problem- get the grub to load up- but then when i tried to install it there were no partitions to select from as i deleted them while i was in windows. and then i tried to create a partition during the installation process- it was taking so long and i was sick enough to shutdown my computer during that process. after i turned on my computer,trying to install it again but then in the installing process windows 7 was not showing up. i quited the process- shut down my computer.After, i used my windows 7 recovery disk and repaired the windows for issues. when it finished. i restarted my computer. i again faced the error : no partitions and grub rescue>. then i researched for some codes, typed them in but that didnt work either. Then i decided to install zorin os again, this time i done partitions in the installing process. there it selected about 87.91 gb for zorin os and the rest for windows 7. my total memory was 250 now for windows 7 144.76 was left. However, i still had 92.95 gb free where as the used is only 51.80. now after zorin os installed, i restarted the computer.However, now when i try to load windows 7 from the grub menu- (as in when i select the windows 7 option to boot up) i am forwarded with the message- 0xc0000225 driver is missing or corrupted. I can't even boot up in safe modes because they require this driver as well.
Then, when i boot in the recovery disk, it looks for error but cannot fix them. other than this, i tried to rebuild he BCD in the command-as for the first time i didn't really carry out the whole procedure-the second time when i try to rename the BCD it said duplicate file or something similar and and at the end, it still shows 0 installations. However, i am still able to access the hard drive of windows 7 in zorin os.
View 2 Replies
View Related
Nov 17, 2012
my computepr is with out grafic what to do tget it from net
View 1 Replies
View Related
Dec 13, 2012
Graphics driver for windows 7 ultimate free download
View 5 Replies
View Related
Dec 20, 2012
i will be doing a fresh install of windows 7 because my current one is full of malware and junk. So i wanted to know if i could backup my drivers because i have two ASUS HD 7770s in crossfire and it will be a real pain, the reinstall the drivers because i have to install the drivers one at a time for each card.
View 1 Replies
View Related
Jun 19, 2012
Earlier xp but after win7 the booting not show xp at booting time
View 1 Replies
View Related
Aug 19, 2011
I have a graphics card usr5699b that was working for a short time on win 7 but after 2 days it caused my video cards to mess up possible driver issue or irq conflict. Is there anyway to make the drivers compatible with win 7?
View 4 Replies
View Related
Sep 8, 2012
im trying to update drivers for intel hd graphics card on my laptop with a clean install of the new drivers and everytime i uninstall and delete all the old driver files windows automatically re installs them.
I'm using home premium so i cant use the gps.edit method to prevent it from re installing them. I have also tried the turn off out automatic updates and changing the driver device settings and i havent had any luck.
Is there any other way to prevent windows from re installing the old drivers?
View 2 Replies
View Related
Apr 22, 2011
Do I have to get a new graphics card for win.-7 w/d865gbf motherboard. Mine is not compatible with win-7 or can I dwld a driver that will work?
View 3 Replies
View Related
Nov 16, 2011
I have an HP Pavilion dv6000 it came origionally with Vista Home, however I installed Windows 7 Ultmate 64bit but I need the Nvidia Graphics Driver fro it to work,
View 4 Replies
View Related
Dec 15, 2011
sir how can i download graphics driver of DELL optiplex gx280 desktop for windows 7?
View 2 Replies
View Related
Nov 12, 2012
i need a link to download dv6000 64bit window7 graphics
View 1 Replies
View Related
Nov 26, 2012
i need network card adapter.
View 1 Replies
View Related
Jan 28, 2013
I have downloaded and installed the latest driver from NVIDIA website (version 310.90 WHQL) but device manager in windows 7 64 bit keeps telling me I have version 9.18.13.1090.What can I do? Graphics card is GEforce 560?
View 3 Replies
View Related
Jun 10, 2010
I need the driver for Mercury PVM7 graphics driver for windows 7.
View 2 Replies
View Related
Aug 16, 2011
I just installed Windows 7 x86 on my Gateway MT3423 laptop.I did not realize that the graphics driver was not compatible with Windows 7.Does anyone know of a way to get an alternate driver that works with this configuration?
View 6 Replies
View Related