Unable Booting From Windows 7 64-bit Installation Disc
Feb 28, 2012
my computer has Windows XP 32-bit, and i'm trying to do a clean install to Windows 7 64-bit. this is my processor. i'm assuming it can take the 64-bit version. i boot from the disc, press any key, and all the files load and whatnot. i see a screen that says "starting windows", and the logo appears. i figure that's a good sign. but...after that, i get stuck on a screen with nothing but some "desktop wallpaper" and my mouse. it just sits there. i can move my mouse around, but no installation options pop up. i bought the upgrade version of Windows 7, and i'm under the impression that you should be able to do a clean install using those discs. i stuck the 32-bit disc in my drive, and the install menu showed up no problem. but i want to install the 64-bit version.
Firstly I should say that I am primarily a mac user, and it is not my laptop I am posting about. Although I am reasonably knowledgable about Windows, I haven't used it since XP, about four years ago, and so am pretty rusty.Basically, my girlfriends computer randomly turned off about a week ago, she assumed it was a dead battery, plugged it in, and then when it turned back on it wouldn't boot displaying error message: missing operating system.As it is a Dell laptop it didn't come with any installation discs, and I totally forgot to even make a repair disc when we got the laptop. I managed to get hold of a Windows 7 Installation Disc and license key for Windows 7 Ultimate 64 bit through my university. I think the laptop was previously running Windows 7 Home Premium, but that's all I know, and I'm not entirely sure of that fact.
Anyway, burnt the .iso to disc and have tried to boot several times from DVD Drive. The laptop loads the files from the DVD fine, and gets as far as the "Starting Windows" screen, where it seems to get stuck for a few minutes, until it becomes a black screen with just a cursor (the cursor still moves). This also happens with an 64 bit repair DVD I also managed to get hold of.
Is there any way to use a windows 7 Ultimate Upgrade disc as a installation disc? Or would I have to go out and get another Windows installation disc and then use the upgrade disc?
My laptop suddenly decided to not run, it gets to "starting windows" but will not go any further. I`ve tried to boot from the OS disc to do a repair but it still goes to "starting windows". If i select "repair computer" at start up without the OS disc it stays at that window and will not go any further, I can`t even get an option when booting from OS disc to format and reload windows. The HDD is spinning so i know it`s getting power. I can run Linux live cd so i`m presuming it`s probably the HDD is fried even though it`s spinning. I even took ouit nthe HDD and connected it to my desktop but the desktop wouldn`t recognise it.
I don't know if this is the right place to post this question but thought I'd give it a try.Basically my problem is that I want to use hdderase to clean a Solid State Drive I've just sold on ebay but I cannot for the life of me get it to work. I have used boot discs before on older computers but the computer I'm trying to do it on now is new and I don't know what is going on with it. I can get Windows boot manager to load with the cd but that doesn't seem to be what I need. I just don't know why it won't work or if I'm doing something wrong or what
My netbook (ASUS UX32) boots up and when I reach the step to install Windows 7 I get a message "cd/dvd drive not found, please select a drive" I have got no idea....i tried the option "browse" ..still nothing, its just
Yesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.
I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.
To start off, I've been having massive problems with my current laptop. Mainly just the OS which started going wonky after a Microsoft update about a month back. Ever since, I've had to deal with slowness, lagginess and many errors. After trying to fix these things manually, such as updating, removing old files I don't need as well as programs, I had to eventually give in and do a system restore. And this is where my other problem begins. For one reason or another, the previous restore points I had are mysteriously gone. I only had one from around 2 days ago. All the ones I had from as far back as a month are history. Why I do not know. I usually check up on that to make sure I have one from way back. Perhaps I may have deleted them without knowing. So much to that.
I really want to do a complete reformatting or system installation. A clean one. However, my DVD drive doesn't recognize or acknowledges any of my OS discs. None of them. And they're all purchased from Microsoft. Not even the ones that came with my laptop are working. All other discs work. Such as DVD's as well as regular CD's. I updated the DVD drivers and still nothing. I tried Fixit and still nothing. I don't get why it only does this with the Microsoft installation discs.Currently, I am using Windows 7 Ultimate on a Dell Precision M4400. 32bit. The DVD/CD is a Toshiba TSST corp DVD+RW TS-U633A. I already tried cleaning the DVD drive as well as making sure all the installation CD's have no signs of damage. And they don't.
I reinstall windows a lot of times. I'm afraid that the Windows 7 installation might get scratches. So, I want to take a backup copy of the disc. I want to know if it is copy protected or something or if I can directly copy it using an image burning software.
I have a new sata3 SSD drive on which I want to install Windows 7. The PC has an existing build of Windows 7 on a different disc which i want to reformat & use for data. I tried this previously and ended up with a dual booting system. Trying to remove the old Windows 7 installation and format that disc created much trouble so now I'm starting again, how to: Install Windows 7 on the new SSD disc (I'm assuming this will work ok as I've done it before), Have the system recognise only the new Windows 7 installation at boot & not the old Windows 7 installation so I don't have to select which OS to use, Reformat the old Windows 7 disc and remove any boot references that it might hold.
To start off, I've been having massive problems with my current laptop. Mainly just the OS which started going wonky after a Microsoft update about a month back. Ever since, I've had to deal with slowness, lagginess and many errors. After trying to fix these things manually, such as updating, removing old files I don't need as well as programs, I had to eventually give in and do a system restore. And this is where my other problem begins. For one reason or another, the previous restore points I had are mysteriously gone. I only had one from around 2 days ago. All the ones I had from as far back as a month are history. Why I do not know. I usually check up on that to make sure I have one from way back. Perhaps I may have deleted them without knowing. So much to that.
Next problem:I really want to do a complete reformatting or system installation. A clean one. However, my DVD drive doesn't recognize or acknowledges any of my OS discs. None of them. And they're all purchased from Microsoft. Not even the ones that came with my laptop are working. All other discs work. Such as DVD's as well as regular CD's. I updated the DVD drivers and still nothing. I tried Fixit and still nothing. I don't get why it only does this with the Microsoft installation discs.
So, I would like to make a custom windows 7 professional installation disc.I would like the installation of:Vlc playeruTorrent.Google chrome browser.Ccleaner.Defraggler.nd remove unnecessary programs / functions of the Windows installation disc.So, what I need to do to make these things succeed?
I have a product key from my laptop but when my computer crashed I couldn't get the old OS back. I still have my product key, how can I reinstall windows 7 without buying a new one?
i am currently running Windows 7 32 bit and want to upgrade to 64 bit. There are some programs installed like Microsoft office which i want to keep so i want to install 64 bit on a partition. i have my product key and I am running windows professional.
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.
Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.
This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.
So I tried to manually set up the bootable flash drive, which also didn't work.
After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. [URL] I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.
Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS) Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.
Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, x64 Family 6 Model 30 Stepping 5 Processor Count: 8 RAM: 3063 Mb Graphics Card: NVIDIA GeForce GTX 560, 1023 Mb Hard Drives: C: Total - 476837 MB, Free - 132797 MB; E: Total - 234627 MB, Free - 205990 MB; F: Total - 234316 MB, Free - 233246 MB; Motherboard: ASUSTeK Computer INC., P7P55D PRO Antivirus: AVG Anti-Virus Free, Updated and Enabled
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever. Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB. This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.So I tried to manually set up the bootable flash drive, which also didn't work. After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive. Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn. Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
I've got a problem with my Windows 7 installation in that - it wont boot! Either in normal or safe mode!
I've tracked the problem down to a driver - CTMMount.sys which was installed by a recent installation of Comodo Time Machine - which has since been uninstalled but doesnt look like the uninstallation has worked correctly.
Therefore I could do with editing the registry/startup procedure so that this file doesnt attempt to load and then I can get back into Windows 7
I have been given the challenge to make a way to install Windows without any installation media and without having to even touch the computer while it's installing. So far I've made a .wim image with the help of this guide and I've made an Autounattend.xml file with thI put the install.wim image in the sources directory on a flash drive and the Autounattend.xml file in the root of the flash drive, and it does exactly what I want it to - all except it's not on a partition. So I move it to a partition and add a boot entry using EasyBCD. It boots fine, but it acts like the Autounattend.xml file isn't even there. So right now I have the choice of hands free installation with media, or manual installation without media. My main question is why the Autounattend.xml file isn't working when I boot the same media from a partition
I've got an Asus P8Z77V Motherboard with an Intel I3 - 2120 processor and 6GB Corsair DDR3 Ram.After I installed the drivers i got on the mobo installation CD, Windows (32 bit Ultimate) just refused to boot. I then went into safe mode uninstalled the graphic drivers and Windows then started up. I am looking to install the graphic drivers as my videos are lagging.
I'm on an HP laptop that originally came with Windows Vista. At some point a while back, I purchased Windows 7 online and upgraded the OS by download--meaning I don't have any physical installation discs.
Now I would like to some how recover this computer to it's factory settings, to wipe all installed programs and files, but I would prefer not to be downgraded back to Vista. Is this possible?
I don't believe I made recovery discs while Vista was installed either. Is it possible to recover the computer at all?
I have a Windows 7 installation disc that I created. It has worked in the past because I have Windows 7 running on this computer now. I wanted to reformat but disc is not booting. Have gone into Bios and checked that, 1 as DVD, 2 as HDD no probs seemingly there. I have also tried it on another laptop with the same result.
My computer ended up with the malicious toolbar iminent. After multiple attempts to remove it I decided to reformat the computer, since my last backup is mercifully recent. However, when I attempted to run a repair disc, but in the middle of this I received the message in the thread's title. What's wrong? Is the repair disc something other than the disc I need? While writing this via my phone I'm currently trying an alternative of restoring my computer from a system image on my backup drive, I don't know if that will solve the problem. But even if it does, I think I should still try to find out what went wrong here for when something goes wrong in the future.
I am unable to open Windows 7 64 bit normally. This has been an escalating problem for about a month. It began as a problem every 4-5 times I started Windows 7. It got more frequent and then, about two weeks ago, I was unable to open Windows 7 normally at all. I can get to Safe Mode. When I try to open Windows 7 normally, I get the Windows logo and Starting Windows, then the screen goes black. The red light indicating hard drive activity continues to flicker but the screen will remain empty for as long as I want to wait.I have run Startup Repair booting from the installation DVD. It either finds nothing wrong or fixes something and tells me to restart, but I can't. I have tried System Restore three times with no luck. I'm just going around in circles.The only things new to the computer are more RAM and an nVidia graphics card but these were installed after the problem began.
I have 2 hard drives, one with Windows 7 and one with Ubuntu Linux installed.The Llnux side works fine so I have internet access.I have run Malwarebytes, SuperAntispyware, something from Kaspersky that looks for rootkits. I have run hardware diagnostics. I have Norton 360 on the Windows 7 drive. All are up to date. None can find anything wrong.Last week I took it to trouble-shooting session at HAL-PC (Houston Area League of PC users) and it worked fine plugged into their CRT monitor and wired keyboard and USB mouse. When I brought the set home, it still didn't work Is it the display or the keyboard causing the problem?I have a Logitech wireless keyboard and mouse and a Viewsonic LCD monitor. The PC, monitor, keyboard and mouse are about 3 years old.I have unplugged everything from the PC except the monitor and the wireless keyboard dongle. I tried starting and then immediately unplugging the dongle so the the PC could not be getting spurious signals from the keyboard or mouse. It didn't work- wouldn't open.
Is it safe to burn a Windows 7 installation ISO image using the 'exact copy' option, meaning making an exact duplicate from an already existing CD. Or is it safer to burn a CD from the original ISO file? Wouldn't the 'exact copy' option have higher chances for data corruption, especially since it is a boot/installation CD?
I am trying to install Windows 7 onto my laptop as I want to do a clean install to wipe off everything and have windows freshly put on. My cd/dvd drive cannot read the disc. You can here the drive attempting to load up the disc but to know success. I have tried Microsoft Fix, does not work (however, it has in the past as well as booting from disc at startup-that too has worked in the past), I have tried booting from the cd/dvd drive on bootup, I have attempted to go into the registry and delete lowers installers I think its called (I didnt do this on previously installation attempts and I installed fine). I have all correct drivers according to my laptop, plus I've gone into the packard bell website to download the correct drivers and I have used windows update too in case I am missing anything. Nothing is working.
i am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
